Please wait a minute...
工程设计学报
工程设计学报  2016, Vol. 23 Issue (6): 620-625    DOI: 10.3785/j.issn.1006-754X.2016.06.015
整机和系统设计     
电容器铝壳自动上料-定量灌胶控制系统设计
郑天池, 孙小刚, 郭琳娜, 邵建新, 邱自学
南通大学 机械工程学院, 江苏 南通 226019
Design of automatic feeding and quantitative filling control system for capacitor aluminum shell
ZHENG Tian-chi, SUN Xiao-gang, GUO Lin-na, SHAO Jian-xin, QIU Zi-xue
School of Mechanical Engineering, Nantong University, Nantong 226019, China
 全文: PDF(723 KB)   HTML
摘要：

针对电容器铝壳自动上料和定量灌胶工序存在自动化程度低、灌胶精度低等问题，设计了电容器铝壳自动上料-定量灌胶控制系统.采用三菱FX3GA系列PLC对控制系统的软硬件进行合理配置，并详细设计了系统的硬件组成和软件流程；采用三菱GS系列触摸屏，实现系统的参数修改和状态监测功能.该系统已在电容器生产企业实际应用，应用效果表明：系统运行可靠、平稳，运行周期为10 s，铝壳定量灌胶误差小于2%，其提高了产品质量和生产效率，满足企业生产要求，具有一定的推广价值.
关键词： 电容器;  铝壳;  自动上料;  定量灌胶;  控制系统    
Abstract:

Aiming at the problems existing in the automatic feeding, quantitative filling process of the capacitor aluminum shell such as low automation degree, low filling accuracy and so on, the control system of automatic feeding and quantitative filling for the capacitor aluminum shell was designed. The PLC of Mitsubishi FX3GA series was used to conduct the reasonable configuration of hardware and software for the control system and the hardware composition and software flow of the system were designed in detail. The touch screen of Mitsubishi GS series was used to achieve the system parameter modification and state monitoring. The system had been applied in the practical application of capacitor production enterprise and application effect showed that the system ran reliably and stably, the operation period was 10 s, the error of the quantitative filling for aluminum shell was less than 2%, and the product quality and production efficiency were improved, which could meet the production requirements of enterprises. The system has a certain popularization value.
Key words: capacitor    aluminum shell    automatic feeding    quantitative filling    control system
收稿日期: 2016-05-24 出版日期: 2016-12-28
CLC:  TP273  
基金资助:

江苏省产学研联合创新资金-前瞻性联合研究项目（BY2016053-14）；南通大学研究生创新计划项目（YKC15007）.
通讯作者: 邱自学(1963-),男,江苏南通人,博士,教授,博士生导师,从事机电一体化装备与测控技术、智能结构及其健康监测技术、无线射频识别及其应用等研究,E-mail:qiu.zx@ntu.edu.cn.http://orcid.org//0000-0002-3892-8256     E-mail: qiu.zx@ntu.edu.cn
作者简介: 郑天池(1991-),男,江苏徐州人,硕士生,从事机电一体化装备及测控技术研究,E-mail:876048162@qq.com.
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
郑天池
孙小刚
郭琳娜
邵建新
邱自学

引用本文:

郑天池, 孙小刚, 郭琳娜, 邵建新, 邱自学. 电容器铝壳自动上料-定量灌胶控制系统设计[J]. 工程设计学报, 2016, 23(6): 620-625.

ZHENG Tian-chi, SUN Xiao-gang, GUO Lin-na, SHAO Jian-xin, QIU Zi-xue. Design of automatic feeding and quantitative filling control system for capacitor aluminum shell. Chinese Journal of Engineering Design, 2016, 23(6): 620-625.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn.1006-754X.2016.06.015    或    https://www.zjujournals.com/gcsjxb/CN/Y2016/V23/I6/620

[1] BOTH J. The modern era of aluminum electrolytic capacitors[J]. IEEE Electrical Insulation Magazine, 2015, 31(4):24-34.
[2] 王志申,何业东,孙志华,等. 铝电解电容器高压电子箔点蚀机理的研究[J]. 材料工程,2012,40(5):15-19. WANG Zhi-shen, HE Ye-dong, SUN Zhi-hua, et al. Pitting mechanism for aluminum electrolytic capacitor high voltage foil[J]. Journal of Materials Engineering, 2012, 40(5):15-19.
[3] ZHU S Q, BAN C L, TAO X Q, et al. Modelling specific capacitance of DC etched aluminum foil for aluminum electrolytic capacitor[J]. Journal of Materials Science-Materials in Electronics, 2015, 26(9):6750-6756.
[4] 马皓,王林国. 铝电解电容器退化分析与故障预诊断[J]. 电力系统自动化,2005,29(15):68-73. MA Hao, WANG Lin-guo. Degradation analysis and failure prediction of aluminum electrolytic capacitor[J]. Automation of Electric Power Systems, 2005, 29(15):68-73.
[5] RIGAMONTI M, BARALDI P, ZIO E, et al. Particle filter-based prognostics for an electrolytic capacitor working in variable operating conditions[J]. IEEE Transactions on Power Electronics, 2016, 31(2):1567-1575.
[6] AMARAL A M R, CARDOSO A J M. Condition monitoring of electrolytic capacitors[J]. International Journal of System Assurance Engineering and Management, 2011, 2(4):325-332.
[7] LIN H C. A remote monitoring and control-based precise multiplication riveting system[J]. Computer Applications in Engineering Education, 2006, 13(4):316-323.
[8] 马巧红,李茜,王孟效,等. PLC在饮用水深度净化控制系统中的应用[J]. 工程设计学报,2007,14(6):486-489. MA Qiao-hong, LI Qian, WANG Meng-xiao, et al. Application of PLC on control system of deep purification of drinking water[J]. Chinese Journal of Engineering Design, 2007, 14(6):486-489.
[9] 李哲,王小强,李华龙,等. 海带条自动上料机的设计及应用[J]. 工程设计学报,2012,19(58):408-411. LI Zhe, WANG Xiao-qiang, LI Hua-long, et al. Design and application of the feeding machine for kelp strips[J]. Chinese Journal of Engineering Design, 2012, 19(5):408-411.
[10] 林峰,刘杨,许焰. 基于PLC的水听器回转扫描控制系统的设计及实现[J]. 工程设计学报,2009,16(1):54-57. LIN Feng, LIU Yang, XU Yan. Design and implementation of sonar test system based on PLC[J]. Chinese Journal of Engineering Design, 2009, 16(1):54-57.
[11] 张琨英. 基于PLC的磨削液变频恒压供给系统设计[J]. 工程设计学报,2013,20(2):168-172. ZHANG Kun-ying. Design of grinding fluid frequency conversion constant pressure supply system based on PLC[J]. Chinese Journal of Engineering Design, 2012, 19(6):465-469.
[12] BERNAT J, STEPIEN S, STRANZ A, et al. Infinite time horizon optimal current control of a stepper motor exploiting a finite element model[J]. Bulletin of the Polish Academy of Sciences-technical Sciences, 2014, 62(4):835-841.
[13] 王彦军,李增生. 基于PLC的步进电机控制[J]. 科学技术与工程,2011,11(5):1077-1010. WANG Yan-jun, LI Zeng-sheng. The control of the stepping motor basing on PLC[J]. Science Technology and Engineering, 2011, 11(5):1077-1080.
[14] IBRAHIM D. Microcontroller-based stepper motor control basics[J]. Electronics World, 2015, 121:20-24.
[15] 王俊杰,张伟,金杰峰,等. 电动汽车电池装箱生产线控制系统的设计[J]. 组合机床与自动化加工技术,2016(2):122-125. WANG Jun-jie, ZHANG Wei, JIN Jie-feng, et al. Design of controlling system for electric car battery packing production line[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2016(2):122-125.
[16] 乔东凯,杨向宇,李多民,等. 基于PLC对三维立体运动系统的电气控制及应用[J]. 工程设计学报,2012,19(6):465-469. QIAO Dong-kai, YANG Xiang-yu, LI Duo-min, et al. Electrical control and application of 3D motion system based on PLC[J]. Chinese Journal of Engineering Design, 2012, 19(6):465-469.
[17] 王淑旺,顾立才,张定,等. 基于PLC和触摸屏的车身总装夹具控制系统设计[J]. 组合机床与自动化加工技术,2012(1):74-77. WANG Shu-wang, GU Li-cai, ZHANG Ding, et al. Design on control system of car body welding jig based on PLC and TP[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2012(1):74-77.
[18] 庞海亮,潘丰. 液洗机配料控制系统设计[J]. 仪表技术与传感器,2015(7):81-85. PANG Hai-liang, PAN Feng. Design of blending system for liquid washing machine[J]. Instrument Technique and Sensor, 2015(7):81-85.
[19] 朱剑,舒志兵,郑之开. 基于激光传感器的玻璃切割控制系统的设计[J]. 仪表技术与传感器,2016(2):66-68. ZHU Jian, SHU Zhi-bing, ZHENG Zhi-kai. Design of glass cutting control system based on laser sensor[J]. Instrument Technique and Sensor, 2016(2):66-68.
[1] 谭鑫平,甘浪,林成旭,李雪梅,李倩,闫旺,陈刚,廖广兰,刘智勇. 基于STM32的全自动病理染色控制系统的设计与实现[J]. 工程设计学报, 2022, 29(4): 510-518.
[2] 王春霖,刘畅,杨华,覃鸿,陈国柱. 用于油气勘探的电代油驱动装置系统设计与分析[J]. 工程设计学报, 2022, 29(2): 220-230.
[3] 张泽, 陈勇, 李光鑫, 雷勇敢, 阮鸥, 王再宙. 电动汽车变速器电液控制系统总成设计及结构优化[J]. 工程设计学报, 2021, 28(3): 335-343.
[4] 郑华林, 杨舜波, 潘盛湖, 王超. 百叶片定长切料-自动排片控制系统研究[J]. 工程设计学报, 2019, 26(4): 461-468.
[5] 曹冠, 陆观, 邱自学, 孙小刚, 夏永平, 庄超. 钢帘线残余扭转在线监测及自动消除控制系统设计[J]. 工程设计学报, 2018, 25(4): 481-487,494.
[6] 谢苗, 闫江龙, 毛君, 李翠, 刘一柱. 智能立体停车位液压控制系统分析[J]. 工程设计学报, 2017, 24(3): 337-342.
[7] 郑天池, 郭琳娜, 孙小刚, 邱自学. 电容器盖板自动预压机及其控制系统设计[J]. 工程设计学报, 2017, 24(1): 108-114.
[8] 郑天池, 邵建新, 郭琳娜, 孙小刚, 张军, 邱自学. 铝电解电容器芯包引脚刺孔机控制系统设计[J]. 工程设计学报, 2016, 23(4): 378-384.
[9] 高 猛，徐 鹏. 高g值冲击下泡沫铝填充铝壳吸能特性研究[J]. 工程设计学报, 2015, 22(5): 469-475.
[10] 毛 君，杨振华，卢进南，谢 苗. 迈步式超前支护装备过渡过程支撑力控制系统设计[J]. 工程设计学报, 2015, 22(5): 387-393.
[11] 毛 君，杨振华，卢进南，谢 苗. 迈步式超前支护装备过渡过程支撑力控制系统设计[J]. 工程设计学报, 2015, 22(4): 387-393.
[12] 杨 旭，龚国芳，杨华勇*，陈 馈，王林涛. 管片拼装试验台回转电液控制系统设计及试验分析[J]. 工程设计学报, 2014, 21(2): 180-184.
[13] 雷飞，杨红波. 基于模糊控制的商用车驾驶室悬置有限带宽主动控制系统研究[J]. 工程设计学报, 2014, 21(1): 32-37.
[14] 杨旭, 龚国芳, 杨华勇, 陈馈, 王林涛. 盾构管片拼装试验台监控系统设计[J]. 工程设计学报, 2013, 20(6): 534-538.
[15] 陈旭东, 冯攀. 直流电机复合定位控制系统性能分析及系统优化[J]. 工程设计学报, 2012, 19(5): 391-399.