机械工程 |
|
|
|
|
汽车制动系统用滚珠丝杠副振动检测方法 |
刘文涛1,2,3( ),赵坤2,汪久根1,*( ),宋丽2 |
1. 浙江大学 机械工程学院,浙江 杭州 310058 2. 慈兴集团有限公司 技术中心,浙江 宁波 315301 3. 济南大学 机械工程学院,山东 济南 250022 |
|
Vibration measurement of ball screws used in automobile braking systems |
Wen-tao LIU1,2,3( ),Kun ZHAO2,Jiu-gen WANG1,*( ),Li SONG2 |
1. Department of Mechanical Engineering, Zhejiang University, Hangzhou 310058, China 2. Technique Center, Cixing Group Co. Ltd, Ningbo 315301, China 3. Department of Mechanical Engineering, University of Jinan, Jinan 250022, China |
引用本文:
刘文涛,赵坤,汪久根,宋丽. 汽车制动系统用滚珠丝杠副振动检测方法[J]. 浙江大学学报(工学版), 2021, 55(8): 1529-1537.
Wen-tao LIU,Kun ZHAO,Jiu-gen WANG,Li SONG. Vibration measurement of ball screws used in automobile braking systems. Journal of ZheJiang University (Engineering Science), 2021, 55(8): 1529-1537.
链接本文:
https://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2021.08.014
或
https://www.zjujournals.com/eng/CN/Y2021/V55/I8/1529
|
1 |
刘贵如, 王陆林, 张世兵, 等 电动汽车电子机械制动系统的研究与设计[J]. 安徽工程大学学报, 2013, 28 (1): 23- 26 LIU Gui-ru, WANG Lu-lin, ZHANG Shi-bing, et al Research and design of electric automobile electro mechanical brake system[J]. Journal of Anhui Polytechnic University, 2013, 28 (1): 23- 26
doi: 10.3969/j.issn.2095-0977.2013.01.007
|
2 |
YONG J W, GAO F, DING N G, et al Design and validation of an electro-hydraulic brake system using hardware-in-the-loop real-time simulation[J]. International Journal of Automotive Technology, 2017, 18 (4): 603- 612
doi: 10.1007/s12239-017-0060-2
|
3 |
郭亮. 基于表征学习的滚珠丝杠副系统状态监测与性能评估技术研究[D]. 成都: 西南交通大学, 2016: 51. GUO Liang. Ball screw system condition monitoring and performance evaluation based on representation learning[D]. Chengdu: Southwest Jiaotong University, 2016: 51.
|
4 |
程鑫. 高速滚珠丝杠副性能试验台的研制及丝杠温升试验[D]. 济南: 山东大学, 2011: 21. CHENG Xin. High-speed ball screws comprehensive performance test-bed development and temperature variation test[D]. Jinan: Shandong University, 2011: 21.
|
5 |
刘建佐. 滚珠丝杠副力学特性及滚珠循环系统研究[D]. 大连: 大连理工大学, 2012: 60. LIU Jian-zuo. Research on mechanical characteristics and ball recirculation system of ball screw[D]. Dalian: Dalian University of Technology, 2012: 60.
|
6 |
张子锋. 滚珠丝杠副故障测试试验台与测控系统设计[D]. 南京: 东南大学, 2015: 8. ZHANG Zi-feng. Design of a fault test bench and its measuring and control system for ball screws[D]. Nanjing: Southeast University, 2015: 8.
|
7 |
刘际轩. 高速重载滚珠丝杠副轴向动态刚度及实验研究[D]. 杭州: 浙江大学, 2012: 43. LIU Ji-xuan. Axial dynamic stiffness and experimental research of high-speed overloaded ball screw[D]. Hangzhou: Zhejiang University, 2012: 43.
|
8 |
YOSHIDA T, TOZAKI Y MATSUMOTO S. Study on load distribution and ball motion of ball screw[J]. Journal of Japanese Society of Tribologists, 2003, 48 (8): 659- 666
|
9 |
WEI C C, LAI R S Kinematical analyses and transmission efficiency of a preloaded ball screw operating at high rotational speeds[J]. Mechanism and Machine Theory, 2011, 46 (7): 880- 898
doi: 10.1016/j.mechmachtheory.2011.02.009
|
10 |
OKWUDIRE C E, ALTINTAS Y Hybrid modeling of ball screw drives with coupled axial, torsional and lateral dynamics[J]. Journal of Mechanical Design, 2009, 131 (7): 071002
doi: 10.1115/1.3125887
|
11 |
OKWUDIRE C E Improved screw-nut Interface model for high-performance ball screw drives[J]. Journal of Mechanical Design, 2011, 133 (4): 041009
doi: 10.1115/1.4004000
|
12 |
张佐营, 宋现春, 姜洪奎 精密滚珠丝杠副轴向振动激励因素的试验研究[J]. 振动、测试与诊断, 2008, 28 (1): 14- 17 ZHANG Zuo-ying, SONG Xian-chun, JIANG Hong-kui Experiment study on exciting factors of axial vibration of precision ball screw[J]. Journal of Vibration, Measurement and Diagnosis, 2008, 28 (1): 14- 17
doi: 10.3969/j.issn.1004-6801.2008.01.004
|
13 |
董亮, 汤文成, 刘立 滚珠丝杠副进给系统混合建模及其振动时变性分析[J]. 振动与冲击, 2013, 32 (20): 196- 202 DONG Liang, TANG Wen-cheng, LIU Li Hybrid modeling and time-varying analysis of vibration for a ball screw drive[J]. Journal of Vibration and Shock, 2013, 32 (20): 196- 202
doi: 10.3969/j.issn.1000-3835.2013.20.037
|
14 |
付振彪, 王太勇, 张雷, 等 滚珠丝杠进给系统动力学建模与动态特性分析[J]. 振动与冲击, 2019, 38 (16): 56- 63 FU Zhen-biao, WANG Tai-yong, ZHANG Lei, et al Dynamic modeling and vibration analysis of ball screw feed driving systems[J]. Journal of Vibration and Shock, 2019, 38 (16): 56- 63
|
15 |
IGARASHI T, TOKUNAGA Y, TOKUTAKE T Studies on the sound and vibration of a ball screw: 4th report, effects of various factors on sound of a ball screw[J]. Transactions of the Japan Society of Mechanical Engineers, Part C, 1993, 59 (568): 3907- 3913
doi: 10.1299/kikaic.59.3907
|
16 |
IGARASHI T, TOKUNAGA Y, KAMIMURA N Studies on the sound and vibration of a ball screw: 5th report, sound caused by random waviness on flank surfaces[J]. Transactions of the Japan Society of Mechanical Engineers, Part C, 1995, 61 (588): 3369- 3374
doi: 10.1299/kikaic.61.3369
|
17 |
陈勇将, 汤文成 端块式滚珠丝杠副振动特性分析[J]. 机械传动, 2016, 40 (12): 117- 122 CHEN Yong-jiang, TANG Wen-cheng Analysis of vibration characteristic of end: block type ball screw pair[J]. Journal of Mechanical Transmission, 2016, 40 (12): 117- 122
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|