| 机械工程 |
|
|
|
|
| 采用动力测试的双转子卧螺离心机模型修正 |
周瑾( ),高天宇,陈怡,席鸿皓 |
| 南京航空航天大学 机电学院，江苏 南京 210016 |
|
| Model updating of dual-rotor decanter centrifuge with dynamic test |
| Jin ZHOU(),Tian-yu GAO,Yi CHEN,Hong-hao XI |
| College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China |
引用本文:
周瑾,高天宇,陈怡,席鸿皓. 采用动力测试的双转子卧螺离心机模型修正[J]. 浙江大学学报(工学版), 2019, 53(2): 241-249.
Jin ZHOU,Tian-yu GAO,Yi CHEN,Hong-hao XI. Model updating of dual-rotor decanter centrifuge with dynamic test. Journal of ZheJiang University (Engineering Science), 2019, 53(2): 241-249.
链接本文:
http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2019.02.006
或
http://www.zjujournals.com/eng/CN/Y2019/V53/I2/241
|
| 1 |
MERKL R, STEIGER W. Properties of decanter centrifuges in the mining industry[J]. Minerals and Metallurgical Processing, 2012, 2 (1): 6- 12
|
| 2 |
LO L, WU W, YANG Y, et al. Research on Identification of the noice and vibration of a decanter centrifuge [C] // 8th International Conference on Future Generation Communication and Networking. Taichung: [s. n.], 2014: 37–40.
|
| 3 |
杨钊, 黄维菊, 高志惠 大长径比卧螺离心机螺旋输送器的有限元分析[J]. 过滤与分离, 2011, 21 (4): 13- 15
YANG Zhao, HUANG We-iju, GAO Zhi-hui Finite element analysis of screw conveyor of horizontal screw centrifuge with large aspect ratio[J]. Filtration and Separation, 2011, 21 (4): 13- 15
doi: 10.3969/j.issn.1005-8265.2011.04.004
|
| 4 |
张志新, 王立智, 付豫龙, 等 高速卧螺离心机动力性能优化[J]. 化工机械, 2015, 10 (5): 676- 678
ZHANG Zhi-xin, WANG Li-zhi, FU Yu-long, et al Dynamic performance optimization of high-speed decanter centrifuge[J]. Chemical Engineering and Machinery, 2015, 10 (5): 676- 678
doi: 10.3969/j.issn.0254-6094.2015.05.018
|
| 5 |
张国良, 崔记银, 孙括, 等 卧螺离心机螺旋输送器转子系统的动力学分析[J]. 新技术新工艺, 2013, (12): 105- 107
ZHANG Guo-liang, CUI Ji-yin, SUN Kuo, et al Dynamic analysis on the spiral conveyor rotor system of horizontal spiral centrifuge[J]. Journal of Filtration and Separation, 2013, (12): 105- 107
doi: 10.3969/j.issn.1003-5311.2013.12.034
|
| 6 |
张雷. 基于有限元的卧螺离心机转鼓、螺旋输送器的研究[D]. 太原: 中北大学, 2015: 48.
ZHANG Lei. Study of dum and screw cnveyor of cntrifuge based on FEA [D]. Taiyuan: North University of China, 2015: 48.
|
| 7 |
杨彬, 王琪, 方海峰, 等 基于Ansys的卧螺过滤离心机的动态特性优化[J]. 机械强度, 2014, 36 (3): 419- 424
YANG Bin, WANG Qi, FANG Hai-feng, et al Dynamic charactrtistic optimization of horizontal worm screen centrifuge based on Ansys[J]. Journal of Mechanical Strength, 2014, 36 (3): 419- 424
|
| 8 |
张保强, 陈国平, 郭勤涛, 等 基于模态频率和有效模态质量的有限元模型修正[J]. 振动与冲击, 2012, 24 (31): 69- 73
ZHANG Bao-qiang, CHEN Guo-ping, GUO Qin-tao, et al Finite element model updating based on modal frequency and effective modal mass[J]. Journal of Vibration and Shock, 2012, 24 (31): 69- 73
|
| 9 |
WARD H, STEFAN L, PALU S. Modal analysis theory and testing [M]. 2th ed. London: Research Studies Press Ltd, 2000: 131.
|
| 10 |
陈怡. 磁悬浮轴承支承的卧螺离心机动力学分析及优化设计[D]. 南京: 南京航空航天大学, 2016: 52.
CHEN Yi. Dynamics analysis and optimization design of the maglev decanter centrifuge [D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2016: 52.
|
| 11 |
XU Y, ZHOU J, DI L Active magnetic bearing rotor model updating using resonance and MAC error[J]. Shock and Vibration, 2015, (10): 2- 4
|
| 12 |
梅庆, 欧元霞, 高德平. 花键联接刚度及其对转子动力特性的影响[C]//第十届航空发动机结构强度与振动会议. 黄山:[s.n.], 2000: 311–313.
MEI qing, Ou YUAN-xia, GAO De-ping. Spline joint stiffness and its influence on rotor dynamic characteristics [C] // 10th Symposium on Aeroengine Structural Strength and Vibration. Huangshan: [s. n.], 2000: 311–313.
|
| 13 |
章伊华, 庞奎, 林丹益, 等 基于接触面特征的螺栓联接刚度研究[J]. 兵工学报, 2017, (1): 195- 201
ZHANG Yi-hua, PANG Kui, LIN Dan-yi, et al Study of bolt joint stiffness based on contact surface characteristics[J]. Acta Armamentarii, 2017, (1): 195- 201
doi: 10.3969/j.issn.1000-1093.2017.01.026
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
