机械与能源工程 |
|
|
|
|
焊接对大型石油储罐象足屈曲的影响规律 |
余雏麟,陈志平,曾 明,杨立才,曹国伟 |
浙江大学 化工机械研究所,浙江 杭州 310027 |
|
Effect of welding on elephant foot buckling of large oil storage tank |
YU Chu-lin, CHEN Zhi-ping, ZENG Ming, YANG Li-cai, CAO Guo-wei |
Institute of Chemical Machinery Engineering, Zhejiang University, Hangzhou 310027, China |
引用本文:
余雏麟,陈志平,曾 明,杨立才,曹国伟. 焊接对大型石油储罐象足屈曲的影响规律[J]. J4, 2011, 45(7): 1248-1253.
YU Chu-lin, CHEN Zhi-ping, ZENG Ming, YANG Li-cai, CAO Guo-wei. Effect of welding on elephant foot buckling of large oil storage tank. J4, 2011, 45(7): 1248-1253.
链接本文:
https://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2011.07.018
或
https://www.zjujournals.com/eng/CN/Y2011/V45/I7/1248
|
[1] 美国地震工程研究会. 洛马普里埃塔地震考察[M]. 中国石油化工总公司抗震办公室,译. 北京:地震出版社,1991. [2] HATAYAMA K. Lessons from the 2003 Tokachioki, Japan, earthquake for prediction of longperiod strong ground motions and sloshing damage to oil storage tanks [J]. Journal of Seismology, 2008, 12: 255-263. [3] CHEN Z P, DUAN Y Y, SHEN J M, et al. A simplified method for calculating the stress of large storage tank wall [J]. Proceedings of the IMechE Part E: Journal of Process Mechanical Engineering, 2007, 221(3): 119-127. [4] 陈志平,沈建民,葛颂,等. 基于组合圆柱壳理论的大型油罐应力分析[J]. 浙江大学学报:工学版,2006,40(9):1629-1633. CHEN Zhiping, SHEN Jianmin, GE Song, et al. Stress analysis of large oil storage tanks based on combined cylindrical shell [J]. Journal of Zhejiang University: Engineering Science, 2006, 40(9): 1629-1633. [5] HUBNER A, TENG J G, SAAL H. Buckling behavior of large steel cylinders with patterned welds [J]. International Journal of Pressure Vessels and Piping, 2006, 83: 13-26. [6] HOLST J M F G, ROTTER J M, CALLADINE C R. Imperfections and buckling in cylindrical shells with consistent residual stresses [J]. Journal of Construct Steel Research, 2000, 54(2): 265-282. [7] BERRY P A, ROTTER J .M, BRIDGE R Q. Compression tests on cylinders with circumferential weld depressions [J]. Journal of Engineering Mechanics, 2000, 126(4): 405-413. [8] 陈志平, 余雏麟, 曾明,等.多层不等厚组合圆柱壳屈曲数值模拟分析[J]. 浙江大学学报:工学版,2009,43(9):1679-1683. CHEN Zhiping, YU Chulin, ZENG Ming, et al. Numerical simulation on buckling of combined unequalthicknesscourse cylindrical shell [J]. Journal of Zhejiang University: Engineering Science, 2009, 43(9): 1679-1683. [9] ARBOCZ J, HOL J M. Collapse of axially compressed cylindrical shells with random imperfections [J]. Journal of American Institute of Aeronautics and Astronautics, 1991, 29(12): 2247-2256. [10] YAMAKI N. Elastic stability of circular cylindrical shells [M]. Amsterdam: Elsevier, 1984: 8. [11] 汪建华, 陆皓, 魏良武. 固有应变有限元法预测焊接变形理论及其应用 [J]. 焊接学报, 2002, 23(6): 36-40. WANG Jianhua, LU Hao, WEI Liangwu. Theory and application of inherent strain method for predicting welding residual deformation [J]. Transactions of the China Welding Institution, 2002, 23(6): 36-40. [12] 汪建华. 焊接数值模拟技术及其应用[M]. 北京:上海交通大学出版社, 2003: 94. [13] 郭乙木,陶伟明,庄茁. 线性与非线性有限元及其应用[M]. 北京:机械工业出版社, 2004: 273. [14] 宋昌永,吴开成. 平底圆柱钢筒仓稳定设计方法比较[J]. 浙江大学学报:工学版,2004,38(8): 978-983. SONG Changyong, WU Kaicheng. Evaluation of stability design of flatbottomed cylindrical steel silos [J]. Journal of Zhejiang University: Engineering Science, 2004, 38(8): 978-983. [15] 沈建明. 大型油罐的静强度及动力响应分析[D].杭州:浙江大学, 2006: 84-86. SHEN Jianming. Static strength analysis and dynamic response research of large oil storage tank [D]. Hangzhou: Zhejiang University,2006: 84-86. |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|