电子、通信与自动控制技术 |
|
|
|
|
考虑协变量的设备退化和生产批量整合模型 |
刘学娟1(),赵斐2 |
1. 北京科技大学 经济管理学院,北京 100083 2. 东北大学秦皇岛分校 管理学院,河北 秦皇岛 066004 |
|
Integrated model of system degradation and production lot sizing with considering covariate |
Xue-juan LIU1(),Fei ZHAO2 |
1. School of Economics and Management, University of Science and Technology Beijing, Beijing 100083, China 2. School of Management, Northeastern University at Qinhuangdao, Qinhuangdao 066004, China |
1 |
成国庆, 周炳海, 李玲 劣化系统的生产、质量控制与视情维护联合建模与优化[J]. 计算机集成制造系统, 2019, 25 (7): 1620- 1629 CHENG Guo-qing, ZHOU Bing-hai, LI Ling Joint optimization of production, quality control and condition-based maintenance for imperfect system[J]. Computer Integrated Manufacturing Systems, 2019, 25 (7): 1620- 1629
|
2 |
卢震, 郭巧顺, 徐健 基于周期性不完全预防性维修的最优经济生产批量决策[J]. 系统工程理论与实践, 2017, 37 (10): 2621- 2629 LU Zhen, GUO Qiao-shun, XU Jian The decision of optimal economic production lot based on periodic imperfect preventive maintenance[J]. Systems Engineering: Theory and Practice, 2017, 37 (10): 2621- 2629
doi: 10.12011/1000-6788(2017)10-2621-09
|
3 |
PENG H, HOUTUM G Joint optimization of condition-based maintenance and production lot-sizing[J]. European Journal of Operational Research, 2016, 253 (1): 94- 107
doi: 10.1016/j.ejor.2016.02.027
|
4 |
LIU X, WANG W, PENG R An integrated preventive maintenance and production planning model with sequence-dependent setup costs and times[J]. Quality and Reliability Engineering International, 2017, 33 (8): 2451- 2461
doi: 10.1002/qre.2202
|
5 |
王建军, 刘晓盼, 刘锋, 等 随机机器故障下加工时间可控的并行机鲁棒调度[J]. 中国管理科学, 2017, 25 (3): 137- 146 WANG Jian-jun, LIU Xiao-pan, LIU Feng, et al Robust scheduling of unrelated parallel machines subject to stochastic breakdowns and controllable processing times[J]. Chinese Journal of Management Science, 2017, 25 (3): 137- 146
|
6 |
刘学娟, 赵斐, 马晓洋 考虑生产率调整的多产品EPQ与设备维修整合模型[J]. 系统工程学报, 2018, 33 (1): 136- 144 LIU Xue-juan, ZHAO Fei, MA Xiao-yang Integrated EPQ and maintenance model for a multi-product production system with varying production rate[J]. Journal of Systems Engineering, 2018, 33 (1): 136- 144
|
7 |
BOUSLAH B, GHARBI A, PELLERIN R Joint optimal lot sizing and production control policy in an unreliable and imperfect manufacturing system[J]. International Journal of Production Economics, 2013, 144 (1): 143- 156
doi: 10.1016/j.ijpe.2013.01.031
|
8 |
CHEN Y C An optimal production and inspection strategy with preventive maintenance error and rework[J]. Journal of Manufacturing Systems, 2013, 32 (1): 99- 106
doi: 10.1016/j.jmsy.2012.07.010
|
9 |
YE Z, XIE M Stochastic modelling and analysis of degradation for highly reliable products[J]. Applied Stochastic Models in Business and Industry, 2015, 31 (1): 16- 32
doi: 10.1002/asmb.2063
|
10 |
ZHANG Z, SI X, HU C, et al A prognostic model for stochastic degrading systems with state recovery: application to Li-ion batteries[J]. IEEE Transactions on Reliability, 2017, 66 (4): 1293- 1308
doi: 10.1109/TR.2017.2742298
|
11 |
ZHAI Q, YE Z RUL prediction of deteriorating products using an adaptive wiener process model[J]. IEEE Transactions on Industrial Informatics, 2017, 13 (6): 2911- 2921
doi: 10.1109/TII.2017.2684821
|
12 |
LAWLESS J F, CROWDER M J Covariates and random effects in a gamma process model with application to degradation and failure[J]. Lifetime Data Analysis, 2004, 10 (3): 213- 227
doi: 10.1023/B:LIDA.0000036389.14073.dd
|
13 |
LU D, PANDEY M D, XIE W An efficient method for the estimation of parameters of stochastic gamma process from noisy degradation measurements[J]. Journal of Risk and Reliability, 2013, 227 (4): 425- 433
|
14 |
YE Z, CHEN N The inverse Gaussian process as a degradation model[J]. Technometrics, 2014, 56 (3): 302- 311
doi: 10.1080/00401706.2013.830074
|
15 |
WANG X, XU D An inverse Gaussian process model for degradation data[J]. Technometrics, 2010, 52 (2): 188- 197
doi: 10.1198/TECH.2009.08197
|
16 |
LU C, MEEKER W Using degradation measures to estimate a time-to-failure distribution[J]. Technometrics, 1993, 35 (2): 161- 173
doi: 10.1080/00401706.1993.10485038
|
17 |
JAFARI L, MAKIS V Joint optimal lot sizing and preventive maintenance policy for a production facility subject to condition monitoring[J]. International Journal of Production Economics, 2015, 169: 156- 168
doi: 10.1016/j.ijpe.2015.07.034
|
18 |
JAFARI L, MAKIS V Optimal lot-sizing and maintenance policy for a partially observable production system[J]. Computers and Industrial Engineering, 2016, 93: 88- 98
doi: 10.1016/j.cie.2015.12.009
|
19 |
BOUSLAH B, GHARBI A, PELLERIN R Joint economic design of production, continuous sampling inspection and preventive maintenance of a deteriorating production system[J]. International Journal of Production Economics, 2016, 173: 184- 198
doi: 10.1016/j.ijpe.2015.12.016
|
20 |
CHENG G, ZHOU B, LI L Joint optimization of lot sizing and condition-based maintenance for multi-component production systems[J]. Computers and Industrial Engineering, 2017, 110: 538- 549
doi: 10.1016/j.cie.2017.06.033
|
21 |
CHENG G Q, ZHOU B H, LI L Integrated production, quality control and condition-based maintenance for imperfect production systems[J]. Reliability Engineering and System Safety, 2018, 175: 251- 264
doi: 10.1016/j.ress.2018.03.025
|
22 |
刘学娟, 冯志鹏 基于随机系数增长模型的状态维修与EPQ联合优化[J]. 系统工程理论与实践, 2019, 39 (1): 251- 258 LIU Xue-juan, FENG Zhi-peng Joint optimization of condition-based maintenance and EPQ based on the random coefficient growth model[J]. Systems Engineering: Theory and Practice, 2019, 39 (1): 251- 258
doi: 10.12011/1000-6788-2018-0365-08
|
23 |
喻勇, 司小胜, 胡昌华, 等 数据驱动的可靠性评估与寿命预测研究进展: 基于协变量的方法[J]. 自动化学报, 2018, 44 (2): 216- 227 YU Yong, SI Xiao-sheng, HU Chang-hua, et al Data driven reliability assessment and life-time prognostics: a review on covariate models[J]. Acta Automatica Sinica, 2018, 44 (2): 216- 227
|
24 |
COX D R. Regression models and life-tables [J]. Journal of the Royal Statistical Society, 1972, 34(2): 187−220.
|
25 |
刘学娟. 基于随机系数回归模型的退化过程及维修策略[J]. 控制与决策. 2021, 36(3): 754-760. LIU Xue-juan. Research of degradation process and maintenance planning based on random coefficient regression model [J]. Control and Decision, 2021, 36(3): 754-760.
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|