机械工程 |
|
|
|
|
基于H∞理论的滚珠丝杠进给系统滑模控制 |
李剑( ),汤文成*( ) |
东南大学 机械工程学院,江苏 南京 211189 |
|
Sliding mode control for ball screw drives based on H∞ theory |
Jian LI( ),Wen-cheng TANG*( ) |
School of Mechanical Engineering, Southeast University, Nanjing 211189, China |
1 |
赵万华, 张俊, 刘辉, 等 数控机床精度评价新方法[J]. 中国工程科学, 2013, 15 (1): 93- 98 ZHAO Wan-hua, ZHANG Jun, LIU Hui, et al New evaluation method on the precision of NC machine tools[J]. Engineering Sciences, 2013, 15 (1): 93- 98
doi: 10.3969/j.issn.1009-1742.2013.01.018
|
2 |
卢秉恒, 赵万华, 张俊, 等 高速高加速下的进给系统机电耦合[J]. 机械工程学报, 2013, 49 (6): 2- 11 LU Bing-heng, ZHAO Wan-hua, ZHANG Jun, et al Electromechanical coupling in the feed system with high speed and high acceleration[J]. Journal of Mechanical Engineering, 2013, 49 (6): 2- 11
doi: 10.3901/JME.2013.06.002
|
3 |
ERKORKMAZ K, KAMALZADEH A High bandwidth control of ball screw drives[J]. CIRP Annals-Manufacturing Technology, 2006, 55 (1): 393- 398
doi: 10.1016/S0007-8506(07)60443-0
|
4 |
SUN Z, PRITSCHOW G, LECHLER A Enhancement of feed drive dynamics using additional table speed feedback[J]. CIRP Annals-Manufacturing Technology, 2016, 65 (1): 357- 360
doi: 10.1016/j.cirp.2016.04.099
|
5 |
SUN Z, ZAHN P, VERL A, et al A new control principle to increase the bandwidth of feed drives with large inertia ratio[J]. International Journal of Advanced Manufacturing Technology, 2017, 91 (5?8): 1747- 1752
doi: 10.1007/s00170-016-9895-3
|
6 |
GORDON D J, ERKORKMAZ K Accurate control of ball screw drives using poleplacement vibration damping and a novel trajectory prefilter[J]. Precision Engineering, 2013, 37 (2): 308- 322
doi: 10.1016/j.precisioneng.2012.09.009
|
7 |
QIAN R R, LUO M Z, ZHAO J H, et al. Novel sliding mode control for ball screw servo system [C]// International Conference on Mechanical, Industrial, and Manufacturing Technologies. Cape Town: MATEC Web of Conferences, 2016, 54: 03007.
|
8 |
DONG L, TANG W C Adaptive backstepping sliding mode control of flexible ball screw drives with time-varying parametric uncertainties and disturbances[J]. ISA Transactions, 2014, 53 (1): 110- 116
doi: 10.1016/j.isatra.2013.08.009
|
9 |
UTKIN V, SHI J X. Integral sliding mode in systems operating under uncertainty conditions [C]// Proceedings of the 35th IEEE Conference on Decision and Control. Lobe: IEEE, 1996: 4591-4596.
|
10 |
BAO D F, TANG W C, DONG L Integral sliding mode control for flexible ball screw drives with matched and mismatched uncertainties and disturbances[J]. Journal of Central South University, 2017, 24 (9): 1992- 2000
doi: 10.1007/s11771-017-3608-4
|
11 |
王坤, 王建美, 王芳, 等 非匹配不确定系统的滑模控制及在电机控制中的应用[J]. 控制理论及应用, 2019, 36 (1): 143- 150 WANG Kun, WANG Jian-mei, WANG Fang, et al Sliding mode control for nonlinear system with mismatched uncertainties and application in motor control[J]. Control Theory and Applications, 2019, 36 (1): 143- 150
|
12 |
WANG N, LIN W Y Robust tracking control of AC servo system including a ball screw[J]. Neurocomputing, 2016, 179: 110- 117
doi: 10.1016/j.neucom.2015.11.073
|
13 |
LIAN J, ZHAO J Robust H∞ control of uncertain switched systems: a sliding mode control design[J]. Acta Automatica Sinica, 2009, 35 (7): 965- 970
|
14 |
TOKAT S, EKSIN I, GUZELKAYA M Linear time-varying sliding surface design based on co-ordinate transformation for high-order systems[J]. Transactions of the Institute of Measurement and Control, 2009, 31 (1): 51- 70
doi: 10.1177/0142331208090672
|
15 |
TOKAT S, EKSIN I, GUZELKAYA M A new design method for sliding mode controllers using a linear time-varying sliding surface[J]. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 2002, 216 (6): 455- 466
doi: 10.1177/095965180221600602
|
16 |
YANG J, LI S H, YU X H Sliding mode control for systems with mismatched uncertainties via a disturbance observer[J]. IEEE Transactions on Industrial Electronics, 2013, 60 (1): 160- 169
doi: 10.1109/TIE.2012.2183841
|
17 |
董亮. 高速滚珠丝杠进给系统动态特性与控制技术研究[D]. 南京: 东南大学, 2015. DONG Liang. System dynamics and precision control of high speed ball screw drives [D]. Nanjing: Southeast University, 2015.
|
18 |
CHOI H H LMI-based sliding surface design for integral sliding mode control of mismatched uncertain systems[J]. IEEE Transactions on Automatic Control, 2007, 52 (4): 736- 742
doi: 10.1109/TAC.2007.894543
|
19 |
KIM K S, PARK Y, OH S H Designing robust sliding hyperplanes for parametric uncertain systems: a Riccati approach[J]. Automatica, 2000, 36 (7): 1041- 1048
doi: 10.1016/S0005-1098(00)00014-5
|
20 |
姜伟, 王宏力, 陆敬辉, 等 连续时间多胞线性变参数系统变增益H∞/H2输出反馈控制 [J]. 控制理论与应用, 2016, 33 (9): 1225- 1235 JIANG Wei, WANG Hong-li, LU Jing-hui, et al Gain-scheduled H∞/H2 output feedback controller synthesis for continuous-time polytopic linear parameter varying systems [J]. Control Theory and Applications, 2016, 33 (9): 1225- 1235
doi: 10.7641/CTA.2016.50768
|
21 |
CHEN W H, BALLANCE D J, GAWEHROP P J, et al A nonlinear disturbance observer for robotic manipulators[J]. IEEE on Industrial Electronics, 2000, 47 (4): 932- 938
doi: 10.1109/41.857974
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|