机械工程、能源工程 |
|
|
|
|
盾构推进系统突变载荷顺应特性研究 |
侯典清, 龚国芳, 施虎, 王林涛 |
浙江大学 流体动力与机电系统国家重点实验室,浙江 杭州 310027 |
|
Compliance characteristics of propulsion system of
shield tunneling machine under sudden load |
HOU Dian-qing, GONG Guo-fang, SHI Hu, WANG Lin-tao |
State Key Laboratory of Fluid Power and Control,Zhejiang University,Hangzhou 310027,China |
引用本文:
侯典清, 龚国芳, 施虎, 王林涛. 盾构推进系统突变载荷顺应特性研究[J]. J4, 2013, 47(3): 522-527.
HOU Dian-qing, GONG Guo-fang, SHI Hu, WANG Lin-tao. Compliance characteristics of propulsion system of
shield tunneling machine under sudden load. J4, 2013, 47(3): 522-527.
链接本文:
http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2013.03.018
或
http://www.zjujournals.com/eng/CN/Y2013/V47/I3/522
|
[1] 胡国良,龚国芳,杨华勇.基于压力流量复合控制的盾构推进液压系统[J].机械工程学报,2006,42(6):124.
HU Guo-liang,GONG Guo-fang,YANG Hua-yong.The propulsion hydraulic system of shield tunneling machine based on pressure and flow compound control [J].Chinese Journal of Mechanical Engineering, 2006, 42(6):124.
[2] 曾晓星. 异质岩土工况下土压平衡盾构载荷等效及传递特性研究[D].上海:上海交通大学,2009:1-2.
ZENG Xiao-xing. Study on the loads equivalence and transferring behavior of the EPB shield machines penetrating in the heterogeneous geological conditions [D].Shanghai: Shanghai Jiaotong University, 2009: 1-2.
[3] 张凯之,余海东,来新民.复合地层中掘进的盾构机刀盘动态驱动转矩研究[J].中国机械工程,2008,21(6):643-647.
ZHANG Kai-zhi,YU Hai-dong,LAI Xin-min. Study on dynamic cutter head driving torque of shield tunneling in composite strata[J].China Mechanical Engineering, 2008,21(6):643-647.
[4] 邓颖聪. 盾构推进系统的分区建模与性能评价[D]. 上海:上海交通大学,2010:23-25.
DENG Ying-cong. Modeling and performance assessment for the grouping of the thrust system of the shield machine [D].Shanghai: Shanghai Jiaotong University, 2010:23-25.
[5] 熊有伦. 机器人操作[M]. 湖北:湖北科技出版社, 2002:180.
[6] KLABUNDE R E. Cardiovascular Physiology Concepts [M].Ohio: Lippincott Williams & Wilkins, 2004.
[7] ELMARAGHY H A , JOHNS B. An investigation into the compliance of SCARA robots. Part I: Analytical model[J]. Journal of Dynamic Systems, Measurement and Control, 1988, 110(3):18-22.
[8] 赵凯. 锻造操作机缓冲过程仿真与顺应性评价[D].上海:上海交通大学,2009:54-67.
ZHAO Kai. Simulation and evaluation of the compliance process for forging manipulators[D].Shanghai: Shanghai Jiaotong University, 2009:54-67. |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|