Please wait a minute...
Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering)  2014, Vol. 15 Issue (9): 694-710    DOI: 10.1631/jzus.A1400062
Mechanical and Civil Engineering     
Study on the safety of operating high-speed railway vehicles subjected to crosswinds
Xin-biao Xiao, Liang Ling, Jia-yang Xiong, Li Zhou, Xue-song Jin
State Key Laboratory of Traction Power, Southwest Jiaotong University, Chengdu 610031, China
Download:     PDF (0 KB)     
Export: BibTeX | EndNote (RIS)      

Abstract  A coupled vehicle-track dynamic model is put forward for use in investigating the safety effects of crosswinds on the operation of a high-speed railway vehicle. In this model, the vehicle is modeled as a nonlinear multi-body system, and the ballasted track is modeled as a three-layer discrete elastic support system. The steady aerodynamic forces caused by crosswinds are modeled as ramp-shaped external forces being exerted on the vehicle body. This model was used in a numerical analysis of the dynamic response and dynamic derailment mechanisms of high-speed vehicles subjected to strong crosswinds. The effects of the crosswind speeds, crosswind attack angle, and vehicle speed on the operational safety of the vehicle were examined. The operational safety boundaries of a high-speed vehicle subjected to crosswinds were determined. The numerical results obtained indicate that crosswinds at attack angles of 75° to 90° with respect to the forward direction of the vehicle have a great influence on the safety of operating high-speed railway vehicles. The wheelset unloading limit, which determines the position of the warning boundary dividing the safe operating area and the warning area, is the most conservative, i.e., the safest, criterion to use in assessing the high-speed operational safety of vehicles in crosswinds.

Key wordsHigh-speed railway      High-speed train      Crosswinds      Safety boundary      Derailment     
Received: 22 February 2014      Published: 04 June 2014
CLC:  U270.1+1  
Cite this article:

Xin-biao Xiao, Liang Ling, Jia-yang Xiong, Li Zhou, Xue-song Jin. Study on the safety of operating high-speed railway vehicles subjected to crosswinds. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2014, 15(9): 694-710.

URL:

http://www.zjujournals.com/xueshu/zjus-a/10.1631/jzus.A1400062     OR     http://www.zjujournals.com/xueshu/zjus-a/Y2014/V15/I9/694

[1] Jian Han, Guo-tang Zhao, Xin-biao Xiao, Ze-feng Wen, Qing-hua Guan, Xue-song Jin. Effect of softening of cement asphalt mortar on vehicle operation safety and track dynamics[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(12): 976-986.
[2] Satoru Sone. Comparison of the technologies of the Japanese Shinkansen and Chinese High-speed Railways[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(10): 769-780.
[3] Xue-song Jin. Key problems faced in high-speed train operation[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2014, 15(12): 936-945.
[4] Shuo-qiao Zhong, Jia-yang Xiong, Xin-biao Xiao, Ze-feng Wen, Xue-song Jin. Effect of the first two wheelset bending modes on wheel-rail contact behavior[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2014, 15(12): 984-1001.
[5] Jie Zhang, Guang-xu Han, Xin-biao Xiao, Rui-qian Wang, Yue Zhao, Xue-song Jin. Influence of wheel polygonal wear on interior noise of high-speed trains[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2014, 15(12): 1002-1018.
[6] Bin He, Xin-biao Xiao, Qiang Zhou, Zhi-hui Li, Xue-song Jin. Investigation into external noise of a high-speed train at different speeds[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2014, 15(12): 1019-1033.
[7] Ren-peng Chen, Jin-miao Chen, Han-lin Wang. Recent research on the track-subgrade of high-speed railways[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2014, 15(12): 1034-1038.
[8] Liang Ling, Xin-biao Xiao, Jia-yang Xiong, Li Zhou, Ze-feng Wen, Xue-song Jin. A 3D model for coupling dynamics analysis of high-speed train/track system[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2014, 15(12): 964-983.
[9] Meng-ge Yu, Ji-ye Zhang, Wei-hua Zhang. Multi-objective optimization design method of the high-speed train head[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2013, 14(9): 631-641.
[10] Tian Li, Ji-ye Zhang, Wei-hua Zhang. A numerical approach to the interaction between airflow and a high-speed train subjected to crosswind[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2013, 14(7): 482-493.
[11] Li Zhou, Zhi-yun Shen. Dynamic analysis of a high-speed train operating on a curved track with failed fasteners[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2013, 14(6): 447-458.
[12] Li Wang, Li-min Jia, Yong Qin, Jie Xu, Wen-ting Mo. A two-layer optimization model for high-speed railway line planning[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2011, 12(12): 902-912.
[13] Xiao-fan Wu, Chun Chen, Jia-jun Bu, Gang Chen. Sensor network architecture for intelligent high-speed train on-board monitoring[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2011, 12(12): 921-925.
[14] Ji-en Ma, Bin Zhang, Xiao-yan Huang, You-tong Fang, Wen-ping Cao. Design and analysis of the hybrid excitation rail eddy brake system of high-speed trains[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2011, 12(12): 936-944.
[15] Qin-fen Lu, Bin Wang, Xiao-yan Huang, Ji-en Ma, You-tong Fang, Jin Yu, Wen-ping Cao. Simulation software for CRH2 and CRH3 traction driver systems based on SIMULINK and VC[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2011, 12(12): 945-949.