Please wait a minute...
浙江大学学报(工学版)
J4  2013, Vol. 47 Issue (2): 231-237    DOI: 10.3785/j.issn.1008-973X.2013.02.006
    
Dynamic Identification for Robot Manipulators Based on
Modified Fourier Series
WU Wen-xiang, ZHU Shi-qiang, JIN Xing-lai
State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou 310027, China
Download:   PDF(0KB) HTML
Export: BibTeX | EndNote (RIS)      

Abstract  

To deal with the problem of dynamic parameter identification of robot manipulators, a systematic identification procedure was proposed based on modified Fourier series. First, a static continuous friction model was involved to model joint friction for realizable friction compensation in controller design. Then, the robot dynamic model was expressed linearly with respect to dynamic parameter vector. Second, periodic modified Fourier series was designed as exciting trajectory, which satisfied velocity and acceleration boundary conditions. To minimize the sensitivity to measurement noise, the coefficients of modified Fourier series were optimized according to the condition number criterion using genetic algorithm. In addition, considering the measurement noise effects, maximum likelihood estimation method was adopted to obtain accurate parameter estimates. The proposed identification procedure had been implemented on the first three axes of 6DOF robot manipulator. Experimental results show that the needed joint torques can be reconstructed accurately, and identification using modified Fourier series can achieve better accuracy than that using finite Fourier series.

Published: 01 February 2013
CLC:  TP 242.2  
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
Cite this article:

WU Wen-xiang, ZHU Shi-qiang, JIN Xing-lai. Dynamic Identification for Robot Manipulators Based on
Modified Fourier Series. J4, 2013, 47(2): 231-237.

URL:

http://www.zjujournals.com/eng/10.3785/j.issn.1008-973X.2013.02.006     OR     http://www.zjujournals.com/eng/Y2013/V47/I2/231


基于改进傅里叶级数的机器人动力学参数辨识

针对机器人动力学参数辨识的问题,提出一种基于改进傅里叶级数的辨识方法.采用静态连续摩擦模型描述机器人关节摩擦特性,以确保基于该模型的摩擦补偿是物理可实现的.推导得到机器人动力学模型的线性形式.设计严格满足速度、加速度边界条件的改进傅里叶级数作为激励轨迹,并根据条件数准则优化激励轨迹系数.考虑测量噪声的影响,采用最大似然法作为参数估计的方法.实验结果表明,采用所提方法的辨识结果能够准确重构机器人关节力矩值.且相比于传统的基于傅里叶级数的辨识方法,该方法提高参数辨识的精度.

［1］ BROGARDH T. Robot control overview: an industrial perspective ［J］. Modeling Identification and Control, 2009, 30(3): 167-180.
［2］ 刘楚辉,姚宝国,柯映林.工业机器人切削加工离线编程研究［J］.浙江大学学报：工学版,2010,44(3): 426-431.
LIU Chu-hui, YAO Bao-guo, KE Ying-lin. Study on off-line programming of industrial robot for cutting process ［J］. Journal of Zhejiang University: Engineering Science, 2010, 44(3): 426-431.
［3］ KOSTIC D, DE JAGER B, STEINBUCH M, et al. Modeling and identification for high-performance robot control: an RRRrobotic arm case study ［J］. IEEE Transactions on Control Systems Technology, 2004, 12(6): 904-919.
［4］ BONA B, INDRI M, SMALDONE N. Rapid prototyping of a model-based control with friction compensation for a directdrive robot ［J］. IEEE-ASME Transactions on Mechatronics, 2006, 11(5): 576-584.
［5］ QIN Z K, BARON L, BIRGLEN L. A new approach to the dynamic parameter identification of robot manipulators ［J］. Robotica, 2010, 28: 539547.［6］ BENIMELI F, MATA V, VALERO F. A comparison between direct and indirect dynamic parameter identification methods in industrial robots ［J］. Robotica, 2006, 24: 579-590.
［7］ ATKESON C G, AN C H, HOLLERBACH J M. Estimation of inertial parameters of manipulator loads and links ［J］. International Journal of Robotics Research, 1986, 5(3): 101-119.
［8］ ARMSTRONG B. On finding exciting trajectories for identification experiments involving systems with nonlinear dynamics ［J］. International Journal of Robotics Research, 1989, 8(6): 28-48.
［9］ SWEVERS J, GANSEMAN C, DE SCHUTTER J, et al. Experimental robot identification using optimized periodic trajectories ［J］. Mechanical Systems and Signal Processing, 1996, 10(5): 561-577.
［10］ VUONG N D, ANG M H. Dynamic model identification for industrial robots ［J］. Acta Polytechnica Hungarica, 2009, 6(5): 51-68.
［11］ CALANCA A, CAPISANI L M, FERRARA A, et al. MIMO closed loop identification of an industrial robot ［J］. IEEE Transactions on Control Systems Technology, 2011, 19(5): 1214-1224.
［12］ OLSEN M M, PETERSEN H G. A new method for estimating parameters of a dynamic robot model ［J］. IEEE Transactions on Robotics and Automation, 2001, 17(1), 95-100.
［13］ BINGUL Z, KARAHAN O. Dynamic identification of Staubli RX60 robot using PSO and LS methods ［J］. Expert Systems with Applications, 2011, 38(4): 4136-4149.
［14］ GAUTIER M, KHALIL W. Direct calculation of minimum set of inertial parameters of serial robots\
[J\]. IEEE Transactions on Robotics and Automation, 1990, 6(3): 368-373.
［15］ LIN S K. Minimal linear combinations of the inertia parameters of a manipulator ［J］. IEEE Transactions on Robotics and Automation, 1995, 11(3): 360-373.
［16］ SWEVERS J, GANSEMAN C, TUKEL D B, et al. Optimal robot excitation and identification ［J］. IEEE Transactions on Robotics and Automation, 1997, 13(5): 730-740.
［17］ ANTONELLI G, CACCAVALE F, CHIACCHIO P. A systematic procedure for the identification of dynamic parameters of robot manipulators\
[J\]. Robotica, 1999, 17: 427-435.
[1] CHEN Qing-cheng, ZHU Shi-qiang, WANG Xuan-yin, ZHANG Xue-qun. Inverse kinematics sub-problem solution algorithm for serial robot based on screw theory[J]. J4, 2014, 48(1): 8-14.
[2] WANG Hui-fang, ZHU Shi-qiang, WU Wen-xiang. INSGA-Ⅱ based multi-objective trajectory planning for manipulators[J]. J4, 2012, 46(4): 622-628.
[3] DING Yuan-ming, WANG Xuan-yin. Optimization method of serial manipulator structure[J]. J4, 2010, 44(12): 2360-2364.