[1] SOPHIAN A, TIAN Gui yun, TAYLOR D, et al. A feature extraction technique based on principal component analysis for pulsed Eddy current NDT [J]. NDT and E International, 2003, 36(1): 37-41.
[2] YIN Wu liang, PEYTON A J. Thickness measurement of non magnetic plates using multi frequency eddy current sensors [J]. Ndt and E International, 2007, 40(1): 43-48.
[3] 黄琳.基于脉冲涡流信号频谱分析的缺陷表征方法[D].厦门: 厦门大学, 2012.
HUANG Lin. Defect characterization method based on pulse eddy current signal spectrum analysis [D]. Xiamen: Xiamen University, 2012.
[4] LANG Z Q, AGURTO A, TIAN Gui yun, et al. A system identification based approach for pulsed eddy current non destructive evaluation [J]. Measurement Science and Technology, 2007, 18(7): 20-83.
[5] ZHOU De qiang, TIAN Gui yun, ZHANG Bin qiang, et al. Optimal features combination for pulsed eddy current NDT [J]. Nondestructive Testing and Evaluation, 2010, 25(2): 133-143.
[6] HE Yun ze, PAN Meng chun, LUO Fei lu, et al.Reduction of lift off effects in pulsed eddy current for defect classification [J]. IEEE Transactions on Magnetics, 2011, 47(12): 4753-4760.
[7] LI Jian, WU Xin jun, ZHANG Qing, et al. Measurement of lift off using the relative variation of magnetic flux in pulsed eddy current testing. [J]. NDT and EInternational, 2015, 75: 57-64.
[8] 王春艳,陈铁群,张欣宇.脉冲涡流检测技术的研究进展[J].无损探伤,2005, 29(4): 1-4.
WANG Chun yan, CHEN Tie qun, ZHANG Xin yu. Research progress of pulsed eddy current testing technology [J]. Nondestructive Testing, 2005, 29(4): 1-4.
[9] HE Yun ze, PAN Meng chun, CHEN Di xiang, et al. PEC defect automated classification in aircraft multi ply structures with interlayer gaps and lift offs [J]. NDT and E International, 2013, 53(1):39-46.
[10] HE Yun ze, PAN Meng chun, LUO Fei lu, et al. Support vector machine and optimized feature extraction in integrated eddy current instrument [J]. Measurement, 2013, 46(1): 764-774.
[11] CHEN Song can, LIU Jun, ZHOU Zhi hua. Making FLDA applicable to face recognition with one sample per person [J]. Pattern Recognition, 2004, 37(7): 1553-1555.
[12] HOSSEINI S, LAKIS A A. Application of time frequency analysis for automatic hidden corrosion detection in a multilayer aluminum structure using pulsed eddy current [J]. NDT and E International, 2012,47(2): 70-79.
[13] 赖圣.飞机多层金属结构脉冲涡流检测技术研究[D].南昌: 南昌航空大学, 2012.
LAI Sheng. Research on pulsed eddy current testing of aircraft multilayer metal structure [D]. Nanchang: Nanchang Hangkong University, 2012.
[14] 徐平,罗飞路,张玉华,等.基于脉冲涡流检测技术的缺陷定量检测研究[J].工业计量,2006, 16(2): 6-10.
XU Ping, LUO Fei lu, ZHANG Yu hua, et al. Quantitative detection of defects based on pulsed eddy current testing technology [J]. Industrial Measurement, 2006, 16 (2): 6-10.
[15] YU Ya ting, YAN Yue, WANG Fei, et al. Anapproach to reduce lift off noise in pulsed eddy current nondestructive technology [J]. NDT and E International, 2014, 63(4):1-6.
[16] QIU Xuan bin, ZHANG Peng, WEI Ji lin, et al.Defect classification by pulsed eddy current technique in con casting slabs based on spectrum analysis and wavelet decomposition [J]. Sensors and Actuators A Physical, 2013, 203(12): 272-281.
[17] MARDERO S, SCHMOOK B, CHRISTMAN Z, et al. Face recognition using adaptive margin Fisher’s criterion and linear discriminant analysis [J]. International Arab Journal of Information Technology, 2014, 11(2): 149-158. |