电气工程、机械工程 |
|
|
|
|
基于支持向量机的静压转台热误差补偿 |
黄智( ),贾臻杰,邓涛,刘永超,杜丽 |
电子科技大学 机械与电气工程学院,四川 成都 611731 |
|
Thermal error compensation of static pressure turntable based on support vector machine |
Zhi HUANG( ),Zhen-jie JIA,Tao DENG,Yong-chao LIU,Li DU |
School of Mechanical and Electrical Engineering, University of Electronic Science and Technology of China, Chengdu 611731, China |
引用本文:
黄智,贾臻杰,邓涛,刘永超,杜丽. 基于支持向量机的静压转台热误差补偿[J]. 浙江大学学报(工学版), 2019, 53(8): 1594-1601.
Zhi HUANG,Zhen-jie JIA,Tao DENG,Yong-chao LIU,Li DU. Thermal error compensation of static pressure turntable based on support vector machine. Journal of ZheJiang University (Engineering Science), 2019, 53(8): 1594-1601.
链接本文:
http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2019.08.018
或
http://www.zjujournals.com/eng/CN/Y2019/V53/I8/1594
|
1 |
PAHK H, LEE S W Thermal error measurement and real time compensation system for the CNC machine tools incorporating the spindle thermal error and the feed axis thermal error[J]. International Journal of Advanced Manufacturing Technology, 2002, 20 (7): 487- 494
doi: 10.1007/s001700200182
|
2 |
杨建国, 任永强, 朱卫斌, 等 数控机床热误差补偿模型在线修正方法研究[J]. 机械工程报, 2003, 39 (3): 81- 84 YANG Jian-guo, REN Yong-qiang, ZHU Wei-bin, et al On-line correction method of thermal error compensation model for CNC machine tools[J]. Journal of Mechanical Engineering, 2003, 39 (3): 81- 84
|
3 |
林伟青, 傅建中, 许亚洲, 等 基于最小二乘支持向量机的数控机床热误差预测[J]. 浙江大学学报: 工学版, 2008, 42 (6): 905- 908 LIN Wei-qing, FU Jian-zhong, Xu Ya-zhou, et al Thermal errorprediction of CNC machine tools based on least squares support vector machine[J]. Journal of Zhejiang University: Engineering Science, 2008, 42 (6): 905- 908
doi: 10.3785/j.issn.1008-973X.2008.06.001
|
4 |
YANG Z, SUN M, LI W, et al Modified elman network for thermal deformation compensation modeling in machine tools[J]. International Journal of Advanced Manufacturing Technology, 2011, 54 (5?8): 669- 676
doi: 10.1007/s00170-010-2961-3
|
5 |
VYROUBAL J Compensation of machine tool thermal deformation in spindle axis direction based on decomposition method[J]. Precision Engineering, 2012, 36 (1): 121- 127
doi: 10.1016/j.precisioneng.2011.07.013
|
6 |
郭前建, 贺磊, 杨建国 基于投影追踪回归的机床热误差建模技术[J]. 四川大学学报: 工程科学版, 2012, 44 (2): 230- 233 GUO Qian-jian, HE Lei, YANG Jian-guo Thermal error modeling technology for machine tools based on projection tracking regression[J]. Journal of Sichuan University: Engineering Science Edition, 2012, 44 (2): 230- 233
|
7 |
姜辉, 杨建国, 姚晓栋, 等 数控机床主轴热漂移误差基于贝叶斯推断的最小二乘支持向量机建模[J]. 机械工程学报, 2013, 49 (15): 115- 121 JIANG Hui, YANG Jian-guo, YAO Xiao-dong, et al Modeling of thermal drift error of CNC machine tool based on bayesian inference based least squares support vector machine[J]. Journal of Mechanical Engineering, 2013, 49 (15): 115- 121
|
8 |
姚晓栋, 黄奕乔, 马晓波, 等 基于时间序列算法的数控机床热误差建模及其实时补偿[J]. 上海交通大学学报, 2016, 50 (5): 673- 679 YAO Xiao-dong, HUANG Yi-qiao, MA Xiao-bo, et al Thermal error modeling and real-time compensation of CNC machine tools based on time series algorithm[J]. Journal of Shanghai Jiaotong University, 2016, 50 (5): 673- 679
|
9 |
SMITS G F, JORDAAN E M. Improved SVM regression using mixtures of kernels [C]// International Joint Conference on Neural Networks. Honolulu: IEEE, 2002: 2785-2790.
|
10 |
黄智, 王正杰, 李俊英, 等. 基于FA-LSSVM的数控机床主轴热漂移建模方法: 201610055439.3[P]. 2016-01-28.
|
11 |
LU H X, Yang J G, XIANG S T A real time error compensation method for CNC machine tools basedon redevelopment of human-machine-interface[J]. Applied Mechanics and Materials, 2014, 556?562: 2519- 2522
doi: 10.4028/www.scientific.net/AMM.556-562
|
12 |
衡凤琴, 黄智, 陈学尚, 等 数控立车静压转台油膜温度场仿真分析及优化[J]. 机械科学与技术, 2015, 34 (11): 1733- 1737 HENG Feng-qin, HUANG Zhi, CHEN Xue-shang, et al Simulation analysis and optimization of oil film temperature field of static pressure turntable of CNC vertical car[J]. Mechanical Science and Technology, 2015, 34 (11): 1733- 1737
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|