土木与交通工程 |
|
|
|
|
矩形钢管截面延性等级和板件宽厚比相关关系 |
欧阳丹丹1, 付波2,3, 童根树3 |
1. 武警杭州士官学校,浙江 杭州 310023; 2. 杭萧钢构股份有限公司,浙江 杭州 310003;3. 浙江大学 土木工程学系,浙江 杭州 310058 |
|
Ductility grading of rectangular steel tube section and width thickness ratio correlation |
OUYANG Dan dan1, FU Bo2,3 , TONG Gen shu3 |
1. Hangzhou Non Commissioned Officer Academy of CAPF, Hangzhou 310023, China; 2. Hangxiao Steel Structure Company Limited, Hangzhou 310003, China; 3. Department of Civil Engineering, Zhejiang University, Hangzhou 310058, China |
[1] EN1993 1 1: 2006. Eurocode 3: Design of steel structures Part 1 5: Plated structural elements[S]. Brussels: Belgium European Communities for Standardization,2006: 40-43.
[2] 童根树,付波.受压和受弯板延性系数和面向抗震设计的钢截面分类[J].工程力学,2013,30(3): 323-330.
TONG G S, FU Bo. Ductility factors of plates and section classification for seismic design [J].Engineering Mechanics, 2013, 30(3): 323-330.
[3] 付波,童根树.工字形截面的延性系数和面向抗震设计的钢截面分类[J].工程力学,2014,31(6): 173-182.
FU Bo,TONG Gen shu. Ductility factors of I section and section classification for seismic design[J]. Engineering Mechanics, 2014,31(6): 173-182.
[4] AIJ2010鋼構造限界狀態設計指針·同解说[S].日本建築學會,2010: 8-17.
AIJ2010: Recommendation for limit state design of steel structures [S].Japan architectural Institute,2010: 8-17.
[5] 施刚,林错错,王元清,等.高强度钢材箱形截面轴心受压短柱局部稳定试验研究[J].工业建筑, 2012, 42(1): 18-25.
SHI Gang, LIN Cuo cuo, WANG Yuan qing, et al. Experimental study on local buckling of high strength steel square box section stub columns under axial compression[J].Industrial Construction,2012,42(1): 18-25.
[6] USAMI T, FUKUMOTO Y. Welded box compression members [J].Journal of Structural Engineering, 1984, 110(10): 2457-2470.
[7] KEY P W, HASAN W S, HANCOCK G J. Column behavior of cold formed hollow sections [J]. Journal of Structural Engineering,1988.114(2): 390-407.
[8] ZHAO Xiao ling, HANCOCK G J. Square and rectangular hollow sections subject to combined actions [J]. Journal of Structural Engineering,1992.118(3): 648-667.
[9] RASMUSSEN K J R, HANCOCK G J. Design of cold formed stainless steel tubular members. i columns [J]. Journal of Structural Engineering,1993. 119(8): 2349-2367.
[10] RASMUSSEN K J R, HANCOCK G J. Design of cold formed stainless steel tubular members. ii beams [J]. Journal of Structural Engineering. 1993. 119(8): 2368-2386.
[11] SULLY R M, HANCOCK G J. Behavior of cold formed shs beam columns [J]. Journal of Structural Engineering. 1996. 122(3): 326-336.
[12] WILKINSON T, HANCOCK G J. Tests to examine compact web slenderness of cold formed RHS[J]. Journal of Structural Engineering, 1998.124(10):11661174.
[13] WILKINSON T, HANCOCK G J. Predicting the rotation capacity of cold formed RHS beams using finite element analysis [J]. Journal of Constructional Steel Research, 2002. 58(11): 1455-1471.
[14] ZHENG Yi, USAMI T, Ge Han bin. Ductility of thin walle d steel box stub columns [J].Journal of Structural Engineering,2000,126(11): 1304-1311.
[15] GARDNER L, NETHERCOT D A. Experiments on stainless steel hollow sections—Part 1: Material and cross sectional behavior [J].Journal of Constructional Steel Research, 2004, 60(9): 1291-1318.
[16] 石永久,王萌,王元清.结构钢材循环荷载下的本构模型研究[J].工程力学,2012,29(9): 92-98.
SHI Yong jiu, WANG Meng, WANG Yuan qing. Study on constitutive model of structural steel under cyclic loading [J]. Engineering Mechanics, 2012, 29(9): 92-98.
[17] GARDNER L, NETHERCOT D A. Numerical modeling of stainless steel structural components—a consistent approach[J]. Journal of Structrual Engineering,2004, 130(10): 1586-1601.
[18] 陈绍蕃,顾强.钢结构(上册):钢结构基础[M].北京:中国建筑工业出版社,2003.
[19] 彭国之.薄壁截面的局部稳定性研究[D],浙江大学,2012.
PENG Guo Zhi, The research on local buckling of thin walled section[D], Thesis for a Master’s Degree, Zhejiang University, 2012.
[20] 蔡志恒.双周期标准化的弹塑性反应谱研究[D],浙江大学,2011.
CAI Zhi heng, Inelastic spectra normalized by two characteristic periods [D], Doctoral Thesis, Zhejiang University, 2011. |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|