土木工程 |
|
|
|
|
钢板剪力墙单侧加劲肋的有效抗弯刚度 |
童根树,杨章,张磊 |
浙江大学 土木工程学系,浙江 杭州 310058 |
|
Effective rigidity of one side stiffeners in Steel Shear Walls |
TONG Gen shu, YANG Zhang, ZHANG Lei |
Department of Civil Engineering, Zhejiang University, Hangzhou, 310058, China |
[1] 沈金,干钢,童根树. 钢板剪力墙设计与施工的工程实例[J].建筑结构,2013,43(15):19-22.
SHEN Jin, GAN Gang, TONG Gen shu. Practical application of design and construction of steel shear walls. [J].Building Structure, 2013, 43(15):19-22.
[2] 赵伟,杨强跃,童根树. 钢板剪力墙加劲肋刚度及弹性临界应力研究[J].工程力学,2010,27(6):15-23.
Zhao wei, Yang qiangyue, Tong genshu . Stiffener stiffness and elastic buckling stress of steel plate shear wall[J] .Engineer ing Mechanics,2010,27(6):15-23.
[3] 沈嘉嘉. 考虑加劲肋扭转效应的加劲板在轴压下的弹性屈曲研究[D].杭州:浙江大学, 2014.
SHEN Jia jia. Buckling of stiffened plate under uniform compression with stiffener torision include[D]. Hang zhou:Zhejiang University, 2014.
[4] 吴炜. 钢桥受压加劲板稳定与加劲肋设计方法研究[D].上海:同济大学,2006.
WU Wei, Stability of stiffened compression plates of steel bridge and stiffeners design method [D]. Shanghai:Tongji University, 2006.
[5] SCHADE H A. The effective breadth of stiffened plating under bend loads[J]. Journal of Marine Science and Technology, 1951 59:154-182.
[6] TIMOSHENKO S P, GOODIER J N. Theory of Elasticity[M].New York: McGraw Hill Book Company, 1951: 171-177.
[7] BULSON P S. The stability of flat plates [M]. London: Chatto&Windus Ltd. 1970: 220-221.
[8] Seide. Paul. The effect of longitudinal stiffeners located on one side of plate on the compressive buckling stress of the plate stiffener combination[R]. note 2873 Washing ton DC: NACA,1953.
[9] BEDAIR O K. A contribution to stability of stiffened plates under uniform compression[J]. Computers&Structures, 1998, 66(5):535-570.
[10]WANG X, RAMMERSTORFER F G. Determination of effective breadth and effective width of stiffened plates by finite stripe analyses[J]. Thin Walled Strictures, 1996, 26 (4): 261-286.
[11] KATSIKADELIS J T, SAPOUNTZAKIS E. A realistic estimation of the effective breadth of ribbed plates[J]. International Journal of Solids and Structures, 2002, 39(4):789-799.
[12] TIGAS I G, THEODOULIDES A. On the effective breadth of plating[M]. London:Taylor&Francis Group,2012. |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|