机械工程、能源工程 |
|
|
|
|
微通道热沉几何结构的多参数反问题优化 |
林林, 吴睿, 张欣欣 |
北京科技大学 热能工程系,北京 100083 |
|
Optimization for geometric parameters of micro-channel heat sink
using inverse problem method |
LIN Lin, WU Rui, ZHANG Xin-xin |
Department of Thermal Engineering, University of Science and Technology Beijing, Beijing 100083, China |
[1] TUCKERMAN D B, PEASE R F W. Highperformance heat sinking for VLSI [J]. IEEE Electron Device Letter EDL2, 1981: 126-129.
[2] LI J, PETERSON G P, CHENG P. Threedimensional analysis of heat transfer in a micro heat sink with single phase flow [J]. International Journal of Heat and Mass Transfer, 2004, 47(19/20): 4215-4231.
[3] RYU J H, CHOI D H, KIM S J. Numerical optimization of the thermal performance of a microchannel heat sink [J]. International Journal Heat and Mass Transfer, 2002, 45(13): 2823-2827.
[4] CHEN C W, LEE J J, KOU H S. Optimal thermal design of microchannel heat sinks by the simulated annealing method [J]. International Communications in Heat and Mass Transfer, 2008, 35(8): 980-984.
[5] CHEIN R, CHEN J. Numerical study of the inlet/outlet arrangement effect on microchannel heat sink performance [J]. International Journal of Thermal Sciences, 2009, 48(8): 1627-1638.
[6] KAWANO K, MINAKAMI K, IWASAKH I, et al. Development of micro channels heat exchanging [J]. JSME International Journal, 2001, 44(4): 592-598.
[7] QU W, MUDAWAR I. Experimental and numerical study of pressure drop and heat transfer in a singlephase microchannel heat sink [J]. International Journal of Heat and Mass Transfer, 2002, 45(12): 2549-2565.
[8] TISELJ I, HETSRONI G, MAVKO B, et al. Effect of axial conduction on the heat transfer in microchannels [J]. International Journal of Heat and Mass Transfer, 2004, 47(12/13): 2551-2565.
[9] LEE P, GARIMELLA S V, LIU D. Investigation of heat transfer in rectangular microchannels [J]. International Journal of Heat and Mass Transfer, 2005, 48(9): 1688-1704.
[10] WEISBERG A, BAU H H, ZEMEL J N. Analysis of microchannels for integrated cooling [J]. International Journal of Heat and Mass Transfer, 1992, 35(10): 2465-2474.
[11] HWANG L T, TURLIK I, REISMAN A. Thermal module design for advancing packaging [J]. Journal of Electronic Materials, 1987, 16(5): 347-355.
[12] KNIGHT R W, GOODLING J S, HALL D J. Optimal thermal design of forced convection heat sinksanalytical [J]. Journal of Electronic Packaging, 1991, 113(3): 313-321.
[13] KNIGHT R W, HALL D J, GOODLING J S, et al. Heat sink optimization with application to micro channels [J]. IEEE Transactions on Components Hybrids and Manufacturing Technology, 1992, 15(5): 832-842.
[14] WEN Z, CHOO K F. Optimum thermal design of microchannel heat sinks [C]∥ IEEE/CPMT Electronic Packaging Technology Conference. Singapore: IEEE, 1997: 23-129.
[15] CHEIN R, CHEN J. Numerical study of the inlet/outlet arrangement effect on microchannel heat sink performance [J]. International Journal of Thermal Sciences, 2009, 48(8): 1627-1638.
[16] LI J, PETERSON G P. Geometric optimization of a micro heat sink with liquid flow [J]. IEEE Transactions on Components and Packaging Technology, 2006, 29(1): 145-154.
[17] LI J, PETERSON G P. 3dimensional numerical optimization of siliconbase high performance parallel microchannel heat sink with liquid flow [J]. International Journal of Heat and Mass Transfer, 2007, 50(15/16): 2895-2904.
[18] BELLOOCHENDE T, LIEBENBERG L, MEYER J P. Constructal cooling channels for microchannel heat sinks [J]. International Journal of Heat and Mass Transfer, 2007, 50(21/22): 4141-4150.
[19] KOU H S, LEE J J, CHEN C W. Optimum thermal performance of microchannel heat sink by adjusting channel width and height [J]. International Communications in Heat and Mass Transfer, 2008, 35(5):577-582.
[20] WANG X D, HUANG Y X, CHENG C H, et al. An inverse geometry design problem for optimization of single serpentine flow field of PEM fuel cell [J]. International Journal of Hydrogen Energy, 2010, 35(9): 4247-4257. |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|