Please wait a minute...
浙江大学学报(工学版)
J4  2010, Vol. 44 Issue (6): 1113-1117    DOI: 10.3785/j.issn.1008-973X.2010.06.011
自动化技术、计算机技术     
基于物元可拓性的配置规则衍生技术
应时彦, 汪胜, 殷建军
浙江工业大学 信息工程学院,浙江 杭州 310014
Derivation technology of product configuration rule
based on extension of
matterelement
YING Shi-yan, WANG Sheng, YIN Jian-jun
 全文: PDF  HTML
摘要：

随着配置产品日益复杂化和大型化,对配置规则的灵活性和可扩充性提出了更高的要求,为此，构建了产品配置规则基础物元,包括配置约束物元和组件实例物元、配置约束物元表达规则的条件部分和组件实例物元表达规则的结论部分,以物元函数的方式实现配置规则的物元统一表达；根据物元的可拓展特性,运用发散、可扩、相关、共轭等拓展方法研究配置规则衍生技术,并建立基于物元的产品配置规则衍生模型,增强了产品配置规则表达的灵活性和可扩充性,降低了产品配置规则获取难度；以电除尘器阳极系统配置规则为例,说明了基于物元可拓性的产品配置规则衍生.
Abstract:

With the improvement of the complex of configuration product, the current modeling method of product configuration rule lacks the supports to flexibility and extension of configuration rule. The matter-element of product configuration rule was defined as including configuration constraint and component instance. The condition of configuration flue was expressed by the matterelement of configuration constraint. The conclusion of configuration flue was expressed by the matterelement of component instance. The configuration rule was described by the combination of matter-element function. And then, the model of product configuration rule was established by the extensible methods of matter-element which including divergent extension method, expansive extension method, correlated extension method and conjugated extension method. So, the capability of extension and flexibility was enhanced, and the difficulty of acquisition of configuration rule was reduced. An example of project implementation under the architecture was given to illustrate the relevant enable technologies for the mentioned methods.
出版日期: 2010-07-16
:  TP 391  
基金资助:

国家发改委企业信息化专项资金资助项目（发改委高技［2004］1272号）;浙江省制造业信息化重大科技攻关项目（2004C11011）
作者简介: 应时彦(1964—),男,浙江嵊州人,副教授,从事计算机与电子技术应用、数字化设计等研究.E-mail: ysy@zjut.edu.cn
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

应时彦, 汪胜, 殷建军. 基于物元可拓性的配置规则衍生技术[J]. J4, 2010, 44(6): 1113-1117.

YING Shi-Pan, HONG Qing, YAN Jian-Jun. Derivation technology of product configuration rule
based on extension of
matterelement. J4, 2010, 44(6): 1113-1117.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2010.06.011    或    http://www.zjujournals.com/eng/CN/Y2010/V44/I6/1113

［1］ HEDIN G, OHLSSON L., McKENNA J. Product configuration using object oriented grammars［C］∥
In Proc of the 8th International Symposium on System Configuration Management.Brussels:［s.n.］, 1998.


［2］ WANG Shiwei,TAN Jianrong, ZHANG Shuyou, et al. Casebased product configuration and reuse in mass customization［J］.Chinese Journal of Mechanical Engineering, 2004,17(2): 233236,252.
［3］ 吴健,陈刚,尹建伟,等.基于本体的产品配置知识共享［J］,浙江大学学报:工学版,2004,38(4): 478483.

WU Jian, CHEN Gang, YIN Jianwei,et al. Ontology based product configuration for sharing［J］. Journal of Zhejiang University: Engineering Science, 2004,38(4): 478483.

［4］ 高鹏,林兰芬,蔡铭,等.基于本体映射的产品配置模型自动获取［J］.计算机集成制造系统(CIMS), 2003,9(9): 810816.

GAO Peng, LIN Lanfen, CAI Ming,et al. Automatic acquisition of product configuration model based on ontology mapping［J］.Computer Integrated Manufacturing Systems, 2003,9(9): 810816.

［5］ GUT J A W,PINTO J M, Optimal configuration design for plate heat exchangers［J］. International Journal of Heat and Mass Transfer, 2004, 47(22): 48334848.

［6］ SHE YUN M, SOONHUNG H, Knowledgebased parametric design of mechanical products based on configuration design method ［J］. Expert System with Application, 2001, 21(2): 99107.

［7］ SABIN D, WEIGEL R. Product configuration frameworks: a survey［J］. IEEE Intelligent Systems & Their Applications, 1998,13(4): 4249.

［8］ STUDER R, BENJAMINS V R, FENSEL D. Knowledge engineering: principles and methods［J］. Data and Knowledge Engineering,1998,25: 161197.

［9］ 蔡文.物元模型及其应用［M］.北京：科学技术文献出版社,1994.

［10］ 蔡文,杨春燕,林伟初.可拓工程方法［M］.北京：科学出版社,1997
[1] 赵建军,王毅,杨利斌. 基于时间序列预测的威胁估计方法[J]. J4, 2014, 48(3): 398-403.
[2] 崔光茫, 赵巨峰, 冯华君, 徐之海, 李奇, 陈跃庭. 非均匀介质退化图像快速仿真模型的建立[J]. J4, 2014, 48(2): 303-311.
[3] 张天煜, 冯华君, 徐之海, 李奇, 陈跃庭. 基于强边缘宽度直方图的图像清晰度指标[J]. J4, 2014, 48(2): 312-320.
[4] 刘中, 陈伟海, 吴星明, 邹宇华, 王建华. 基于双目视觉的显著性区域检测[J]. J4, 2014, 48(2): 354-359.
[5] 王相兵,童水光,钟崴,张健. 基于可拓重用的液压挖掘机结构性能方案设计[J]. J4, 2013, 47(11): 1992-2002.
[6] 王进, 陆国栋, 张云龙. 基于数量化一类分析的IGA算法及应用[J]. J4, 2013, 47(10): 1697-1704.
[7] 刘羽, 王国瑾. 以已知曲线为渐进线的可展曲面束的设计[J]. J4, 2013, 47(7): 1246-1252.
[8] 胡根生,鲍文霞,梁栋,张为. 基于SVR和贝叶斯方法的全色与多光谱图像融合[J]. J4, 2013, 47(7): 1258-1266.
[9] 吴金亮, 黄海斌, 刘利刚. 保持纹理细节的无缝图像合成[J]. J4, 2013, 47(6): 951-956.
[10] 陈潇红,王维东. 基于时空联合滤波的高清视频降噪算法[J]. J4, 2013, 47(5): 853-859.
[11] 朱凡,李悦,蒋 凯,叶树明,郑筱祥. 基于偏最小二乘的大鼠初级运动皮层解码[J]. J4, 2013, 47(5): 901-905.
[12] 吴宁, 陈秋晓, 周玲, 万丽. 遥感影像矢量化图形的多层次优化方法[J]. J4, 2013, 47(4): 581-587.
[13] 计瑜,沈继忠,施锦河. 一种基于盲源分离的眼电伪迹自动去除方法[J]. J4, 2013, 47(3): 415-421.
[14] 王翔,丁勇. 基于Gabor滤波器的全参考图像质量评价方法[J]. J4, 2013, 47(3): 422-430.
[15] 童水光, 王相兵, 钟崴, 张健. 基于BP-HGA的起重机刚性支腿动态优化设计[J]. J4, 2013, 47(1): 122-130.