土木与水利工程 |
|
|
|
|
基于现场数据的TBM掘进速率研究 |
罗华1,2, 陈祖煜1,3, 龚国芳4, 赵宇1,2, 荆留杰5, 王超4 |
1. 浙江大学 岩土工程研究所, 浙江 杭州 310058;
2. 浙江大学超重力研究中心, 浙江 杭州 310058;
3. 中国水利水电科学研究院岩土工程研究所, 北京 100048;
4. 浙江大学 流体动力与机电系统国家重点实验室, 浙江 杭州 310027;
5. 中国中铁工程装备集团有限公司, 河南 郑州 450016 |
|
Advance rate of TBM based on field boring data |
LUO Hua1,2, CHEN Zu-yu1,3, GONG Guo-fang4, ZHAO Yu1,2, JING Liu-jie5, WANG Chao4 |
1. Institute of Geotechnical Engineering, Zhejiang University, Hangzhou 310058, China;
2. Hypergravity Research Center of Zhejiang University, Hangzhou 310058, China;
3. Department of Geotechnical Engineering, China Institute of Water Resources and Hydropower Research, Beijing 100048, China;
4. State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou 310027, China;
5. China Railway Engineering Equipment Group Co. Ltd, Zhengzhou 450016, China |
引用本文:
罗华, 陈祖煜, 龚国芳, 赵宇, 荆留杰, 王超. 基于现场数据的TBM掘进速率研究[J]. 浙江大学学报(工学版), 2018, 52(8): 1566-1574.
LUO Hua, CHEN Zu-yu, GONG Guo-fang, ZHAO Yu, JING Liu-jie, WANG Chao. Advance rate of TBM based on field boring data. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2018, 52(8): 1566-1574.
链接本文:
http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2018.08.017
或
http://www.zjujournals.com/eng/CN/Y2018/V52/I8/1566
|
[1] ROSTAMI J. Development of a force estimation model for rock fragmentation with disc cutters through theoretical modeling and physical measurement of crushed zone pressure[D]. Colorado:Colorado School of Mines, 1997
[2] CHEN L H, LABUZ J F. Indentation of rock by wedge-shaped tools[J]. International Journal of Rock Mechanics and Mining Sciences, 2006, 43(7):1023- 1033.
[3] 姚羲和, 赵晓豹, 龚秋明, 等. 滚刀线性侵入试验中岩石破裂模式研究[J]. 岩土工程学报, 2014, 36(9):1705- 1713 YAO Xi-he, ZHAO Xiao-bao, GONG Qiu-ming, et al. Linear cutting experiments on crack modes of rock under indentation of a single disc cutter[J]. Chinese Journal of Geotechnical Engineering, 2014, 36(9):1705- 1713
[4] CHANG S H, CHOI S W, BAE G J, et al. Performance prediction of TBM disc cutting on granitic rock by the linear cutting test[J]. Tunnelling and Underground Space Technology, 2006, 21(3):271-285.
[5] 龚秋明, 何冠文, 赵晓豹, 等. 掘进机刀盘滚刀间距对北山花岗岩破岩效率的影响实验研究[J]. 岩土工程学报, 2015, 37(1):54-60 GONG Qiu-ming, HE Guan-wen, ZHAO Xiao-bao, et al. Influence of different cutter spacings on rock fragmentation efficiency of Beishan granite by TBM [J]. Chinese Journal of Geotechnical Engineering, 2015, 37(1):54-60
[6] 莫振泽, 李海波, 周青春, 等. 楔刀作用下岩石微观劣化的试验研究[J]. 岩土力学, 2012, 33(5):1333-1340 MO Zhen-ze, LI Hai-bo, ZHOU Qing-chun, et al. Experimental study of rock microscopic deterioration under wedge cutter[J]. Rock and Soil Mechanics, 2012, 33(5):1333-1340
[7] 马洪素, 龚秋明, 王驹, 等. 围压对TBM滚刀破岩影响规律的线性切割试验研究[J]. 岩石力学与工程学报, 2016, 35(2):346-355 MA Hong-su, GONG Qiu-ming, WANG Ju, et al. Linear cutting tests on effect of confining stress on rock fragmentation by TBM cutter[J]. Chinese Journal of Rock Mechanics and Engineering, 2016, 35(2):346-355
[8] 马洪素, 纪洪广. 节理倾向对TBM滚刀破岩模式及掘进速率影响的试验研究[J]. 岩石力学与工程学报, 2011, 30(1):155-163 MA Hong-su, JI Hong-guang. Experimental study of the effect of joint orientation on fragmentation modes and penetration rate under TBM disc cutters[J]. Chinese Journal of Rock Mechanics and Engineering, 2011, 30(1):155-163
[9] 刘泉声, 潘玉丛, 孔晓璇, 等. TBM滚刀贯入过程中泥岩破坏特征试验研究[J]. 岩土力学, 2016, 37(S1):166-174 LIU Quan-sheng, PAN Yu-cong, KONG Xiao-xuan, et al. Experimental investigation on mudstone fragmentation characteristics in indentation process by TBM disc cutter[J]. Rock and Soil Mechanics, 2016, 37(S1):166-174
[10] CHO J W, JEON S, YU S H, et al. Optimum spacing of TBM disc cutters:a numerical simulation using the three-dimensional dynamic fracturing method[J]. Tunnelling and Underground Space Technology, 2010, 25(3):230-244.
[11] 满林涛, 李守巨. 盘形滚刀破岩过程有限元数值模拟[J]. 工程建设, 2011, 43(4):1-5 MAN Lin-tao, LI Shou-ju. Finite element numerical simulation of process of rock breaking by disc cutter[J]. Engineering Construction, 2011, 43(4):1-5
[12] 蒋明镜, 孙亚, 王华宁, 等. 全断面隧道掘进机破岩机理离散元分析[J]. 同济大学学报:自然科学版, 2016, 44(7):1038-1044 JIANG Ming-jing, SUN Ya, WANG Hua-ning, et al. Rock failure mechanism analysis with discrete element method by using tunnel boring machine[J]. Journal of Tongji University:Natural Science, 2016, 44(7):1038-1044
[13] 莫振泽, 李海波, 周青春, 等. 基于UDEC的隧道掘进机滚刀破岩数值模拟研究[J]. 岩土力学, 2012, 33(4):1196-1202 MO Zhen-ze, LI Hai-bo, ZHOU Qing-chun, et al. Research on numerical simulation of rock breaking using TBM disc cutters based on UDEC method[J]. Rock and Soil Mechanics, 2012, 33(4):1196-1202
[14] 张魁, 夏毅敏, 林赉贶, 等. TBM刀具作用下节理岩石破碎模式研究[J]. 现代隧道技术, 2016, 53(2):148-156 ZHANG Kui, XIA Yi-min, LIN Lai-kuang, et al. Breaking modes of jointed rock under a TBM cutter[J]. Modern Tunnelling Technology, 2016, 53(2):148-156
[15] 张魁, 夏毅敏, 谭青, 等. 不同围压条件下TBM刀具破岩模式的数值研究[J]. 岩土工程学报, 2010, 32(11):1780-1787 ZHANG Kui, XIA Yi-min, TAN Qing, et al. Numerical study on modes of breaking rock by TBM cutter under different confining pressures[J]. Chinese Journal of Geotechnical Engineering, 2010, 32(11):1780-1787
[16] 孙金山, 陈明, 陈保国, 等. TBM滚刀破岩过程影响因素数值模拟研究[J]. 岩土力学, 2011, 32(6):1891-1897 SUN Jin-shan, CHEN Ming, CHEN Bao-guo, et al. Numerical simulation of influence factors for rock frag mentation by TBM cutters[J]. Rock and Soil Mechanics, 2011, 32(6):1891-1897
[17] 施文俊, 袁宝远. DDA模拟TBM破岩机理[J]. 科学技术与工程, 2012, 12(20):5101-5104 SHI Wen-jun, YUAN Bao-yuan. TBM failure rock mechalism with DDA simulation[J]. Science Technology and Engineering, 2012, 12(20):5101-5104
[18] 卢瑾, 高捷, 梅稚平. 岩石力学参数对TBM掘进速率的影响分析[J]. 水电能源科学, 2010, 28(7):44-46 LU Jin, GAO Jie, MEI Zhi-ping. Influence analysis of rock mechanical parameters on TBM penetrating rate[J]. Water Resources and Power, 2010, 28(7):44-46
[19] BRULAND A. Hard rock tunnel boring[D].Trondheim:Norwegian University of Science and Technology, 1998
[20] 宋克志, 孙谋. 复杂岩石地层盾构掘进效能影响因素分析[J]. 岩石力学与工程学报, 2007, 26(10):2092-2096 SONG Ke-zhi, SUN Mou. Analysis of influencing factors of shield tunneling performance in complex rock strata[J]. Chinese Journal of Rock Mechanics and Engineering, 2007, 26(10):2092-2096
[21] GONG Q M, ZHAO J, JIANG Y S. In situ TBM penetration tests and rock mass boreability analysis in hard rock tunnels[J]. Tunnelling and Underground Space Technology, 2007, 22(3):303-316.
[22] 杜立杰, 齐志冲, 韩小亮, 等. 基于现场数据的TBM可掘性和掘进性能预测方法[J]. 煤炭学报, 2015, 40(6):1284- 1289 DU Li-jie, QI Zhi-chong, HAN Xiao-liang, et al. Prediction method for the boreability and performance of hard rock TBM based on boring data on site[J]. Journal of China Coal Society, 2015, 40(6):1284- 1289
[23] 龚秋明, 佘祺锐, 侯哲生, 等. 高地应力作用下大理岩岩体的TBM掘进试验研究[J]. 岩石力学与工程学报, 2010, 29(12):2522-2532 GONG Qiu-ming, SHE Qi-rui, HOU Zhe-sheng, et al. Experimental study of TBM penetration in marble rock mass under high geostress[J]. Chinese Journal of Rock Mechanics and Engineering, 2010, 29(12):2522-2532
[24] 刘泉声, 刘建平, 潘玉丛, 等. 硬岩隧道掘进机性能预测模型研究进展[J]. 岩石力学与工程学报, 2016, 35(S1):2766-2786 LIU Quan-sheng, LIU Jian-ping, PAN Yu-cong, et al. Research advances of tunnel boring machine performance prediction models for hard rock[J]. Chinese Journal of Rock Mechanics and Engineering, 2016, 35(S1):2766-2786 |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|