Please wait a minute...
浙江大学学报(工学版)  2018, Vol. 52 Issue (6): 1209-1215    DOI: 10.3785/j.issn.1008-973X.2018.06.021
机械与能源工程     
安装参数与掘进参数对滚刀破岩阻力的影响
林赉贶1, 夏毅敏1, 贾连辉2, 贺飞2, 杨妹1, 杨凯1
1. 中南大学 机电工程学院, 湖南 长沙 410083;
2. 中铁工程装备集团有限公司, 河南 郑州 450016
Influence of installation and tunnelling parameters on rock-breaking resistance of disc cutter
LIN Lai-kuang1, XIA Yi-min1, JIA Lian-hui2, HE Fei2, YANG Mei1, YANG Kai1
1. College of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China;
2. China Railway Engineering Equipment Group Co. Ltd, Zhengzhou 450016, China
 全文: PDF(4007 KB)   HTML
摘要:

为获得不同切削顺序下盘形滚刀安装参数与掘进参数对其破岩阻力的影响,通过建立多滚刀破岩数值模型,研究不同切削顺序下滚刀贯入度、刀间距、安装半径与刀盘转速等参数对滚刀破岩阻力的影响规律,采用多因素正交实验法分析各因素对破岩阻力的影响显著性,并通过滚刀破岩试验验证数值分析结果的正确性.研究结果表明:滚刀破岩阻力总体上随贯入度、切削速度、刀间距与安装半径的增加而增大;不同切削顺序下,滚刀破岩阻力各不相同,其差异性随贯入度增加以及刀间距减小而逐渐增大;3种不同切削顺序下,贯入度对滚刀破岩阻力影响均为非常显著,刀盘转速和滚刀安装半径对破岩阻力影响较小,刀间距对破岩阻力的影响随切削顺序变化而有明显差异,破岩试验结果与仿真基本一致.

Abstract:

To obtain the influences of installation and tunnelling parameters for disc cutters on the rock-breaking resistance under different cutting sequence, a numerical model of rock breaking for multiple cutters was established, and the effects of cutter space, penetration, installation radius and cutterhead rotational velocity on the cutter rock-breaking resistance were investigated under different cutting sequences. Multi factor orthogonal experiment was used to analyze the influence degree of various factors on the rock breaking resistance, and the validity of the numerical analysis was verified by the rock breaking experiment. The results indicate that the cutter rock-breaking resistances increase with the increase of cutting penetration, cutterhead rotational velocity, cutter space and installation radius. The cutter rock-breaking resistances are different under different cutting sequences, and the differences increase with the increase in cutter penetration and the decrease in cutter space. The effect of penetration on the cutter rock-breaking resistance is significant, while the effects of installation radius and cutterhead rotational velocity are relatively small. Additionally, the effect of cutter space on the rock-breaking resistance is quite different under different cutting sequences. The results of rock breaking test are basically consistent with the numerical simulation.

收稿日期: 2017-03-04 出版日期: 2018-06-20
CLC:  U455  
基金资助:

国家自然科学基金资助项目(51475478);国家“973”重点基础研究发展规划资助项目(2013CB035401);湖南省科技重大专项资助项目(2014FJ1002);国家“863”高技术研究发展计划资助项目(2012AA041801).

通讯作者: 夏毅敏,男,博士,教授.     E-mail: xiaymj@csu.edu.cn
作者简介: 林赉贶(1988-),男,博士后,从事大型掘进装备刀盘刀具设计理论研究.orcid.org/0000-0001-9331-3302.E-mail:linlaikuang34@163.com
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
作者相关文章  

引用本文:

林赉贶, 夏毅敏, 贾连辉, 贺飞, 杨妹, 杨凯. 安装参数与掘进参数对滚刀破岩阻力的影响[J]. 浙江大学学报(工学版), 2018, 52(6): 1209-1215.

LIN Lai-kuang, XIA Yi-min, JIA Lian-hui, HE Fei, YANG Mei, YANG Kai. Influence of installation and tunnelling parameters on rock-breaking resistance of disc cutter. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2018, 52(6): 1209-1215.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2018.06.021        http://www.zjujournals.com/eng/CN/Y2018/V52/I6/1209

[1] 施虎,杨华勇,龚国芳,等.盾构掘进机关键技术及模拟试验台现状与展望[J].浙江大学学报:工学版,2013,47(5):741-749. SHI Hu, YANG Hua-yong, GONG Guo-fang, et al. Key technologies of shield tunneling machine and present status and prospect of test rigs for tunneling simulation[J]. Journal of Zhejiang University:Engineering Science, 2013, 47(5):741-749.
[2] 刘统,龚国芳,彭左,等.基于液压变压器的TBM刀盘混合驱动系统[J].浙江大学学报:工学版,2016,50(3):419-427. LIU Tong, GONG Guo-fang, PENG Zuo, et al. Hybrid cutterhead driving system for TBM based on hydraulic transformer[J]. Journal of Zhejiang University:Engineering Science, 2016, 50(3):419-427.
[3] HASSANPOUR R, ROSTAMI J, VNVER B. 3D finite difference model for simulation of double shield TBM tunneling in squeezing grounds[J]. Tunnelling and Underground Space Technology, 2014, 40:109-126.
[4] ROSTAMI J. Study of pressure distribution within the crushed zone in the contact area between rock and disc cutters[J]. International Journal of Rock Mechanics and Mining Sciences, 2013, 57:172-186.
[5] 夏毅敏,欧阳涛,陈雷,等.盘形滚刀破岩力影响因素研究[J].应用基础与工程科学学报,2012,20(3):500-507. XIA Yi-min, OUYANG Tao, CHEN Lei, et al. Study on the influencing factors of the disc cutter performance[J]. Journal of Basic Science and Engineering, 2012,20(3):500-507.
[6] 霍军周,杨静,孙伟,等.不同模式下TBM刀群三维回转切削仿真与优化设计[J].哈尔滨工程大学学报,2014,35(11):1403-1408. HUO Jun-zhou, YANG Jing, SUN Wei, et al. Simulation and optimization design of three-dimensional rotating cutting action of TBM cutter group with different modes[J]. Journal of Harbin Engineering University, 2014, 35(11):1403-1408.
[7] 龚秋明,何冠文,赵晓豹,等.掘进机刀盘滚刀间距对北山花岗岩破岩效率的影响实验研究[J].岩土工程学报,2015, 37(1):54-60. GONG Qiu-ming, HE Guan-wen, ZHAO Xiao-bao, et al. Influence of different cutter spacings on rock fragmentation efficiency of Beishan granite by TBM[J]. Chinese Journal of Geotechnical Engineering, 2015,37(1):54-60.
[8] 刘建琴,刘蒙蒙,郭伟.硬岩掘进机盘型滚刀回转破岩仿真研究[J].机械工程学报,2015,51(9):199-205. LIU Jian-qin, LIU Meng-meng, GUO Wei. Research on the simulation of cutting rock rotary by hard rock tunnel boring machine disc cutters[J]. Journal of Mechanical Engineering, 2015, 51(9):199-205.
[9] GERTSCH R, GERTSCH L, ROSTAMI J. Disc cutting tests in colorado red granite:implications for TBM performance prediction[J]. International Journal of rock mechanics and mining sciences, 2007, 44(2):238-246.
[10] CHO J W, JEON S, YU S H, et al. Optimum spacing of TBM disc cutters:a numerical simulation using the three-dimensional dynamic fracturing method[J]. Tunnelling and Underground Space Technology, 2010,25(3):230-244.
[11] CHO J W, JEON S, JEONG H Y, et al. Evaluation of cutting efficiency during TBM disc cutter excavation within a Korean granitic rock using linear-cutting-machine testing and photogrammetric measurement[J]. Tunnelling and Underground Space Technology, 2013, 35:37-54.
[12] ZHAO X B, YAO X H, GONG Q M, et al. Comparison study on rock crack pattern under a single normal and inclined disc cutter by linear cutting experiments[J]. Tunnelling and Underground Space Technology, 2015, 50:479-489.
[13] GENG Q, WEI Z Y, MENG H. An experimental research on the rock cutting process of the gage cutters for rock tunnel boring machine (TBM)[J]. Tunnelling and Underground Space Technology, 2016, 52:182-191.
[14] TUMAC D, BALCI C. Investigations into the cutting characteristics of CCS type disc cutters and the comparison between experimental, theoretical and empirical force estimations[J]. Tunnelling and Underground Space Technology, 2015, 45:84-98.
[15] XIA Y M, OUYANG T, ZHANG X M, et al. Mechanical model of breaking rock and force characteristic of disc cutter[J]. Journal of Central South University, 2012, 19(7):1846-1858.
[16] 杨凯.TBM滚刀不同切削顺序下破岩特性及优化布置研究[D].长沙:中南大学,2014. YANG Kai. Research on rock-breaking characteristics of TBM disc cutter under different cutting sequences and cutter optimal layout[D]. Changsha:Central South University, 2014.
[17] 刘小伟.引洮工程红层软岩隧洞工程地质研究[D].兰州:兰州大学,2008. LIU Xiao-wei. Study on engineering geology of red bed soft rock tunnel in Yintao project[D]. Lanzhou:Lanzhou University, 2008.
[18] 黄风良,孙志坚,李鹏程,等.带扰流孔波纹板的传热和阻力特性[J].浙江大学学报:工学版,2015,49(7):1242-1248. HUANG Feng-liang, SUN Zhi-jian, LI Peng-cheng, et al. Heat transfer and resistance characteristics of corrugated plate with spoiler holes[J]. Journal of Zhejiang University:Engineering Science, 2015, 49(7):1242-1248.
[19] 侯旭丰,高波,申玉生,等.基于正交试验浅埋暗挖洞桩法车站边桩的影响因素分析[J].铁道科学与工程学报,2016,13(12):2463-2470. HOU Xu-feng, GAO Bo, SHEN Yu-sheng, et al.Analysis of side pile influencing factors in shallow underground excavated cave pile method station based on orthogonal test[J]. Journal of Railway Science andEngineering, 2016, 13(12):2463-2470.

[1] 丁智, 张霄, 周联英, 陈自海. 近距离桥桩与地铁隧道相互影响研究及展望[J]. 浙江大学学报(工学版), 2018, 52(10): 1943-1953.
[2] 王超, 龚国芳, 杨华勇, 周建军, 段理文, 张亚坤. NSVR硬岩隧道掘进机刀盘扭矩预测分析[J]. 浙江大学学报(工学版), 2018, 52(3): 479-486.
[3] 夏毅敏, 钱聪, 李正光, 梅勇兵. 隧道掘进机支撑推进系统振动特性[J]. 浙江大学学报(工学版), 2018, 52(2): 233-239.
[4] 刘统, 龚国芳, 石卓, 彭左, 吴伟强. TBM刀盘驱动系统单神经元模糊同步控制[J]. 浙江大学学报(工学版), 2016, 50(11): 2207-2214.