Please wait a minute...
浙江大学学报(工学版)
机械工程     
TBM刀盘驱动系统单神经元模糊同步控制
刘统, 龚国芳, 石卓, 彭左, 吴伟强
浙江大学 流体动力与机电系统国家重点实验室,浙江 杭州 310027
Synchronous control of TBM cutterhead driving system based on single-neuron fuzzy strategy
LIU Tong, GONG Guo fang, SHI Zhuo, PENG Zuo, WU Wei qiang
State Key Lab of Fluid Power Transmission and Control, Zhejiang University, Hangzhou 310027, China
 全文: PDF(1324 KB)   HTML
摘要:

针对全断面硬岩隧道掘进机(TBM)刀盘多电机并联驱动由于载荷突变和传动系统磨耗所引起的电机偏载甚至过载,提出基于单神经元模糊自适应PI速度调节器的转矩主从控制策略.搭建电机闭环矢量控制模型,推导多齿轮齿圈并联系统的数学模型并使用S函数加以描述,在Simulink环境下将两者连接,对比分析转速并联和转矩主从控制策略下,电机对外在载荷和机械磨耗的黏性和刚性啮合响应及其机理,将单神经元模糊PI速度调节器应用于转矩主从策略消除扭矩超调.仿真结果表明,基于单神经元模糊PI速度调节器的转矩主从控制策略能够适应传动系统的参数变化,消除电机在负载变化时的扭矩超调和偏载,并能提高系统的精度和响应速度.

Abstract:

A single-neuron fuzzy proportion-integration (PI) speed controller (NFPISC) for the cutterhead driving system of hard rock tunnel boring machine (TBM) was proposed in order to protect induction motors against load unbalance and overload caused by complex stratum condition and mechanical transmission structure abrasion. The model of closed-loop vector controlled induction motor was established. Dynamic functions of multi-gear meshing system was derived and described in S-Function. Connecting parallel motor and gear meshing system, the total model of TBM cutterhead driving system was founded in Simulink under speed parallel control and torque master-slave control (TMSC) respectively. Speed and torque response against load unbalance and mechanical abrasion were  correspondingly discussed based on rigidity and viscosity meshing analysis. NFPISC was applied to overcome torque overshoot. Rresults show motors under NFPISC based TMSC can eliminate torque overshot and unbalance loading against complex load and mechanical abrasion. Response speed and accuracy were  significantly improved.

出版日期: 2016-11-01
:  TH 132.41 TM 343 U455.3  
基金资助:

国家“863”高技术研究发展计划资助项目(2012AA041803); 国家“973”重点基础研究发展计划资助项目(2013CB035400).

通讯作者: 龚国芳, 男, 教授,博导, ORICD:0000-0001-9553-8783.     E-mail: gfgong@zju.edu.cn
作者简介: 刘统(1993-),男,博士生,从事隧道掘进装备电液控制技术等研究. ORCID: 0000-0002-1889-1062. E-mail:liutongforyq@163.com
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

刘统, 龚国芳, 石卓, 彭左, 吴伟强. TBM刀盘驱动系统单神经元模糊同步控制[J]. 浙江大学学报(工学版), 10.3785/j.issn.1008-973X.2016.11.023.

LIU Tong, GONG Guo fang, SHI Zhuo, PENG Zuo, WU Wei qiang. Synchronous control of TBM cutterhead driving system based on single-neuron fuzzy strategy. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 10.3785/j.issn.1008-973X.2016.11.023.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2016.11.023        http://www.zjujournals.com/eng/CN/Y2016/V50/I11/2207

[1] ZHANG Kaizhi, YU Haidong, LIU Zhongpo, et al. Dynamic characteristic analysis of TBM tunneling in mixedface condition [J]. Simulation Modelling Practice and Theory, 2010, 18(7):1109-1031.
[2] SUGIMOTO M, SRAMOON A. Theoretical model of shield behavior during excavation. I: theory [J]. Journal of Geotechnical & Geoenvironmental Engineering, 2002, 128(2): 138-155.
[3] GRIMA M A, BRUINES P A, VERHOEF P. Modeling tunnel boring machine performance by neuronfuzzy methods [J]. Tunnelling & Underground Space Technology, 2000, 15(3):259-269.
[4] SU O, AKCIN N. Numerical simulation of rock cutting using the discrete element method [J]. International Journal of Rock Mechanics and Mining Sciences, 2011, 48(3): 434-442.
[5] LI Xianhong, YU Haibin, ZENG Peng, et al. Study on linear vibration model of shield TBM cutterhead driving system [J]. International Journal of Acoustics & Vibrations, 2014, 19(5):3864-3871.
[6] 刘然, 孙建忠, 罗亚琴,等. 基于环形耦合策略的多电机同步控制研究[J]. 控制与决策, 2011, 26(6): 957-960.
LIU Ran, SUN Jianzhong, LUO Yaqin, et al. Research on multidrive synchronization control based on ring coupling strategy [J].Control and Design. 2011, 26(6): 957-960.
[7] 杨洋, 张桂香. 基于MATLAB/SIMULINK的异步电机矢量控制调速系统仿真[J]. 湖南大学学报:自然科学版, 2000 ,27(2): 50-55.
YANG Yang, ZHANG Guixiang. Smiulation of vector control induction motor adjusting system based on MATLAB /SIMULINK [J]. Journal of Hunan University:Natural Sciences Edition, 2000, 27(2):50-55.
[8] SHEN Junyi, LUO Wengguang, YANG Chengwu, et al. Design threephase asynchronous motors vector control system based on DSP [C]∥International Conference on Internet Computing and Information Services. Hong Kong, China:IEEE,2011:230-233.
[9] 程启明, 李月娥, 程尹曼, 等. 基于Matlab/Simulink交流电机矢量控制系统建模与仿真[J]. 华东电力, 2010,38 (5): 740-745.
CHEN Qiming, LI Yuee, CHEN Yiman, et al. Modeling and simulation of vector control system of alternating current motor based on Matlab/Simulink [J]. East China Electric Power 2010,38 (5): 740-745.
[10] WEI Jing, SUN Qinchao, SUN Wei, et al. Loadsharing characteristic of multiple pinions driving in tunneling boring machine [J]. Chinese Journal of Mechanical Engineering, 2013, 26(3):532-540.
[11] LI Xianhong, YU Haibin, YUAN Mingzhe, et al. Research on dynamic models and performances of shield tunnel boring machine cutterhead driving system [J]. Advances in Mechanical Engineering, 2013, 2013(1):119-138.
[12]ZERIKAT M, BENDJEBBAR M, BENOUZZA N, et al. Dynamic fuzzyneural network controller for induction motor drive [J]. Proceedings of World Academy of Science Engineering & Technology, 2005:278.
[13] DENAI M A, ATTIA S A. Fuzzy and neural control of an induction motor [J]. International Journal of Applied Mathematics & Computer Science, 2002, 12(2):221-233.
[14] DANDIL B, GOKBULUT M, ATA F. A PI type fuzzyneural network controller for induction motor drives [J]. Journal of Applied Sciences, 2005, 5(7) :12861291.
[15] 丁军, 徐用懋. 单神经元自适应 PID 控制器及其应用[J] . 控制工程, 2004, 11(1) : 27-30.
DING Jun, XU Yongmao. Single neuron adaptive PID controller and its applications [J]. Control Engineering of China, 2004, 11(1): 27-30.
[16] 付华, 冯爱伟, 徐耀松, 等. 基于单神经元控制器的异步电动机矢量控制[J]. 中国电机工程学报, 2006, 26(1) :127-131.
FU Hua, FENG Aiwei, XU Yaosong, et al. The vector control of induction motor drive based on single neuron [J]. Proceeding of the CSEE, 2006, 26(1): 127-131.
[17] 陈杰, 陈冉, 陈家伟,等. 变速风力发电机组的模糊单神经元PID控制[J]. 中国电机工程学报, 2011, 31(27): 88-94.
CHEN Jie, CHEN Ran, CHEN Jiawei, et al. Fuzzy singleneuron PID control of variablespeed wind turbines [J]. Proceeding of the CSEE, 2011, 31(27):88-94.

No related articles found!