Please wait a minute...
浙江大学学报(工学版)
J4  2011, Vol. 45 Issue (8): 1441-1445    DOI: 10.3785/j.issn.1008-973X.2011.08.019
能源工程     
基于自动代码生成的共轨压力控制策略
郭修其, 周文华, 郑朝武
浙江大学 能源工程学系,浙江 杭州 310027
Rail pressure control strategy based on auto-code
generation technology
GUO Xiu-qi, ZHOU Wen-hua, ZHENG Chao-wu
Department of Energy Engineering, Zhejiang University, Hangzhou 310027, China
 全文: PDF  HTML
摘要：

为了缩短共轨压力控制算法的开发周期及降低开发成本,通过Matlab/Simulink及RTW Embedded Coder工具箱完成前馈控制加比例积分微分（PID）反馈控制的高压共轨压力控制策略的建模及自动代码生成.针对共轨压力在发动机一个工作循环内的波动规律,共轨压力控制系统定相位采样共轨压力传感器,提高共轨压力控制的稳定性.试验结果表明,稳态时共轨压力波动幅度小于1.5 MPa,阶跃响应时共轨压力超调量在2 MPa以内,稳定时间小于0.5 s,在不同燃油喷射量下,轨压波动总能稳定在±1.5 MPa以内.该控制策略易于实现,并兼顾控制精度及响应速度,完全满足高压共轨压力控制要求.
Abstract:

In order to shorten rail pressure control strategy development cycle and reduce development costs，modeling and automatic code generation of feed forward control plus proportional-integral-differential(PID) feedback control strategy were completed through the Matlab / Simulink and RTW Embedded Coder kits. For improving the control stability, rail pressure control system was scheduled to sample rail pressure sensor on fixed phase according to the rail pressure fluctuation rules in an engine working cycle. The test results show that rail pressure steady state error is less than 1.5 MPa, maximum overshoot is about 2 MPa or less during pressure step response and settling time is less than 0.5 s, pressure fluctuation is less than ±1.5 MPa under different fuel injection quantities. The control strategy is easy to implement, control accuracy and response performance has met the requirements of common rail pressure control system.
出版日期: 2011-09-08
:  TK 421.23  
通讯作者: 周文华,男,副教授.     E-mail: zhouwh999@126.com
作者简介: 郭修其(1984—),男,硕士生,主要从事发动机电子控制技术方面的研究. Email: aqi315@126.com
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
作者相关文章　　

引用本文:

郭修其, 周文华, 郑朝武. 基于自动代码生成的共轨压力控制策略[J]. J4, 2011, 45(8): 1441-1445.

GUO Xiu-qi, ZHOU Wen-hua, ZHENG Chao-wu. Rail pressure control strategy based on auto-code
generation technology. J4, 2011, 45(8): 1441-1445.

链接本文:

https://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2011.08.019    或    https://www.zjujournals.com/eng/CN/Y2011/V45/I8/1441

［1］ 赵彦斌,钟再敏.基于代码自动生成技术的汽车电子实时控制软件开发［J］.计算机辅助工程,2008,17(3): 37-38.
ZHAO Yanbin, ZHONG Zaimin. Development on automotive electronic real time control software based on autocode generation technology ［J］. Computer Aided Engineering, 2008, 17(3): 37-38.
［2］ 倪计民,杨挺然,杨健，等.基于模型的高压共轨柴油机电控参数优化［J］.内燃机工程,2008,29(1): 6-7.
NI Jimin, YANG Tingran, YANG Jian, et al. Optimizing electrical control parameters of common rail diesel engine by modelbased method［J］. Chinese Internal Combustion Engine Engineering, 2008, 29(1): 6-7.
［3］ 张玉良,高峰,杜发荣，等.基于dSPACE的车辆起步控制策略硬件在回路仿真［J］.系统仿真学报,2008,20(10): 2722-2723.
ZHANG Yuliang, Gao Feng, DU Farong, et al. Hardwareintheloop simulation of vehicle starting control method based on dSPACE ［J］. Journal of System Simulation, 2008, 20(10): 2722-2723.
［4］ 周文华.高压共轨电控喷油系统控制算法研究［J］.内燃机工程,2002,23(4): 31-32.
ZHOU Wenhua. The algorithm research on an electronic controlled high pressure common rail fuel injection system［J］. Chinese Internal Combustion Engine Engineering, 2002, 23(4): 31-32.
［5］ Mathworks Inc. Simulink fixedpoint toolbox user’s guide, release v3.1 ［EB/OL］. ［2010-01-20］. http:∥www.mathworks.com/access/helpdesk/help/toolbox/fixedpoint/rn/bqmzoua.html.
［6］ 肖文雍,杨林,梁锋. GD1高压共轨式电控柴油机燃油喷射压力控制策略的研究［J］. 内燃机学报,2004, 22(3): 239-240.
XIAO Wenyong, YANG Lin, LIANG Feng. Injection pressure control of GD1 electronically controlled highpressure common rail fuel injection system ［J］. Transactions of CSICE, 2004, 22(3): 239-240.
[1] 密刚刚,周文华,沈成宇,郭修其. 柴油机高速电磁阀驱动模块设计与故障诊断[J]. J4, 2012, 46(9): 1654-1659.
[2] 郭修其,周文华,郑朝武. 基于电路仿真的高压共轨电磁阀驱动电路设计[J]. J4, 2011, 45(5): 901-906.
[3] 周文华,竺春狄,苏瑜. 共轨柴油机电控系统若干关键技术[J]. J4, 2011, 45(1): 118-121.