Please wait a minute...
J4  2011, Vol. 45 Issue (8): 1435-1440    DOI: 10.3785/j.issn.1008-973X.2011.08.018
土木工程     
变刚度多重抗侧力结构的串并联模型
童根树, 赵钦
浙江大学 建筑工程学院,浙江 杭州,310058
A series-parallel-circuit model for multiple shear-flexural structures
with varied rigidities over height
TONG Gen-shu, ZHAO Qin
Department of Civil Engineering, Zhejiang University, Hangzhou 310058, China
 全文: PDF  HTML
摘要:

为了解高层结构中个子结构之间的相互作用,对刚度沿高度变化的双重和三重弯剪型抗侧力体系在水平荷载作用下的侧移进行有限元分析,提出一串联并联电路模型来表达各弯剪型子结构之间的相互作用,弯剪型结构的弯曲柔度和剪切柔度被模拟为2个电阻,串联形成串联小电路,多个弯剪型结构并联,被模拟为各个小串联电路并联,流过各个小串联电路的电流是剪力,总电流是总水平剪力,各串联小电路两端电压相等表示各子结构侧移相等.采用这个模型,提出整体结构侧移的一个简单计算方法,与有限元结果对比表明,串并联电路模型计算的侧移有良好的精度,特别是顶部位移的误差很小.

Abstract:

To understand the interaction between substructures in highrise buildings, dual and triple shear-flexural structures with varied rigidities over height were studied by FEM for drift under lateral loads. A series-parallel-circuit model was proposed to describe the interaction among shearflexural substructures: The shear and the flexural flexibilities of each shearflexural structure are simulated by electric resistances connected in series, these are connected in parallel to simulate the dual or triple shear-flexural structures inter-connected by slabs and links. The currents and voltages through the subcircuits were equal to the horizontal shear force and deformation of every single structure, and the total current was equal to the horizontal shear force of the whole structure. Based on this circuit model, a simple formula for predicting the horizontal deformation is proposed. Comparison shows that, the accuracy of the proposed model is acceptable, especially in predicting the drift at the top of the structures.

出版日期: 2011-09-08
:  TU 311.2  
作者简介: 童根树(1963—),男,教授,博导,从事钢结构稳定研究. E-mail: tonggs@zju.edu.cn
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
作者相关文章  

引用本文:

童根树, 赵钦. 变刚度多重抗侧力结构的串并联模型[J]. J4, 2011, 45(8): 1435-1440.

TONG Gen-shu, ZHAO Qin. A series-parallel-circuit model for multiple shear-flexural structures
with varied rigidities over height. J4, 2011, 45(8): 1435-1440.

链接本文:

https://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2011.08.018        https://www.zjujournals.com/eng/CN/Y2011/V45/I8/1435

[1] SMITH B S, COULL A. Tall Building Structures: Analysis and Design [M]. New York: Wiley, 1991.
[2] 童根树,高宇.两个弯剪型抗侧力体系的线性相互作用[J].建筑钢结构进展,2008,10(5): 28-34.
TONG Genshu, GAO Yu. Linear Interaction between Two ShearFlexural Substructures under Horizontal Load [J]. Progress in Steel Building Structures, 2008, 10(5): 28-34.
[3] 武藤清.结构物动力设计[M].北京:中国建筑工业出版社,1984: 45-49.
[4] 童根树,季渊.多高层框架弯剪型支撑结构的稳定性研究[J].土木工程学报,2005,38(5): 28-33.
TONG Genshu, JI Yuan. Stability of multistory frames braced by timoshenko vertical cantilevers [J]. China Civil Engineering Journal, 2005, 38(5): 28-33.
[5] 童根树.钢结构的平面内稳定[M].北京:中国建筑工业出版社,2005.
[6] ROSENBLUETH E,HOLTZ I. Elastic analysis of shear walls in tall buildings [J]. ACI Journal Proceedings, 1960, 56(12): 1209-1222.
[7] KHAN F R, SBAROUNIS J A. Interaction of shear walls and frames [J]. Journal of the Structural Division, ASCE, 1964, 90(3): 285-335.
[8] TIMOSHENKO S P, GERE J M. Theory of elastic stability [M]. New York: Engineering Societies Monograph, McGraw Hill Co. Inc, 1961: 56-88.
[9] 刘开国.高层钢框架PΔ效应的简化计算[J],建筑结构学报,1991,12(5): 42-46.
LIU Kaiguo. Simplified Calculation of PΔ effect in highrise steel frames [J]. Journal of Building Structures, 1991, 12(5): 42-46.
[10] 陈骥. 钢结构稳定理论与设计 [M]. 4版 北京:科学出版社,2008: 165-172.

No related articles found!