Please wait a minute...
浙江大学学报(工学版)
J4  2010, Vol. 44 Issue (8): 1433-1440    DOI: 10.3785/j.issn.1008-973X.2010.08.001
自动化技术、计算机技术     
基于双测头组合的未知自由曲面自适应采样
卢科青,王文,陈子辰
浙江大学现代制造工程研究所,浙江 杭州 310027
Non-contact adaptive sampling for  unknown free-form surface
based on double-probe integration
LU Ke-qing, WANG Wen, CHEN Zi-chen
Institute of Advanced Manufacturing Engineering, Zhejiang University, Hangzhou 310027, China
 全文: PDF  HTML
摘要：

在逆向工程中为了准确、快速、合理地获取未知自由曲面的表面数据,提出一种基于双测头组合的非接触式自适应采样方法.并列组安装2个点激光测头,分别为前端测头和后端测头，利用遮光布阻挡反射光消除两测头之间的测量干扰.在逐行采样过程中,在扫描方向上前端测头用于探路测量,系统实时地对探路测量数据进行处理与曲线拟合,根据拟合曲线的曲率特征为后端测头规划合理的采样间距,后端测头以探路结果为指导完成自适应采样.在测量截面进给方向上,通过截面间夹角分析,自适应地细分测量截面.仿真与实验结果表明,该方法能根据曲面特征合理地布置采样点,能有效提高曲面数字化的效率与精度,为模型重建提供合理的测量数据.
Abstract:

In order to digitize unknown freeform surfaces accurately, quickly and rationally in reverse engineering, a new noncontact adaptive sampling strategy based on doubleprobe integration was presented. The method was characterized by integrating two laser probes abreast as leading probe and end probe respectively. A piece of gobo was used to shut out reflected light to avoid light interference with each other. During the sampling time, at the measuring direction, the leading probe was applied to detect the measuring path in front of the end probe. The data acquired by the leading probe was processed instantaneously to extract the curvature feature of the measured path. The obtained information was subsequently used to generate rational sampling spacing and guide adaptive sampling for the end probe. While at the crosssection intake direction, section angle analysis algorithm was done to subdivide the crosssection if it was needed. Simulation and experiment results indicate that the sampling points generated by the end probe can be laid out rationally according to the curvature feature of the surfaces, therefore the sampling efficiency and accuracy are improved significantly, and effective sampling data can be offered for model reconstruction.
收稿日期: 2009-03-30 出版日期: 2010-09-21
:  TP 391.73  
基金资助:

国家自然科学基金资助项目（50875241）；浙江省自然科学基金重点资助项目(Z1090590)；浙江省科技计划重大专项资助项目（2006C11256）
通讯作者: 王文，男,副教授，硕导.     E-mail: wangwn@zju.edu.cn
作者简介: 卢科青（1980-），男，浙江慈溪人，博士生，从事逆向工程数字化测量研究.E-mail: lukq1980@zju.edu.cn
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

卢科青, 王文, 陈子辰. 基于双测头组合的未知自由曲面自适应采样[J]. J4, 2010, 44(8): 1433-1440.

LEI Ke-Jing, WANG Wen, CHEN Zi-Chen. Non-contact adaptive sampling for  unknown free-form surface
based on double-probe integration. J4, 2010, 44(8): 1433-1440.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2010.08.001    或    http://www.zjujournals.com/eng/CN/Y2010/V44/I8/1433

［1］ 柯映林. 反求工程CAD建模理论、方法和系统［M］. 北京: 机械工业出版社,2005:13．
［2］ SONG C K, KIM S W. Reverse engineering: autonomous digitization of freeformed surfaces on a CNC coordinate measuring machine ［J］. International Journal of Machine Tools & Manufacture, 1997, 37(7): 10411051．
［3］ SAVIO E, CHIFFRE L D, SCHMITT R. Metrology of freeform shaped parts ［J］. CIRP Annals-Manufacturing Technology, 2007, 56(2): 810835．
［4］ LI Yangdong, GU Peihua. Freeform surface inspection techniques state of the art review ［J］. ComputerAided Design,2004, 36(13): 13951417．
［5］ CHAN V H, BRADLEY C, VICKERS G W. Multisensor approach to automating coordinate measuring machinebased reverse engineering ［J］. Computers in Industry, 2001, 44(2): 105115．
［6］ SHEN T S, HUANG J, MENQ C H. Multiplesensor integration for rapid and highprecision coordinate metrology ［J］. IEEE/ASME Transactions on Mechatronics, 2000, 5(2): 110121．
［7］ 朱心雄.自由曲线曲面造型技术［M］. 北京：科学出版社,2000:118121．
［8］ 冯国馨,张国雄,谢则晓,等. 自由曲线B样条最小逼近误差拟合建模［J］. 天津大学学报, 2001, 34(3), 285288．
FENG Guoxin, ZHANG Guoxiong, XIE Zexiao, et al. Model building of freeform surface with least approximate error based on Bsplines ［J］. Journal of Tianjin University, 2001, 34(3): 285288．
［9］ FENG H Y, LIU Y, XI F. Analysis of digitizing error of a laser scanning system ［J］. Precision Engineering, 2001, 25(3): 185191．
［10］ GALETTO M, VEZZETTI E. Reverse engineering of freeform surfaces: a methodology for threshold definition in selective sampling ［J］. International Journal of Machine Tools and Manufacture, 2006, 46(10): 10791086．
[1] 卢科青,王文,汪玮,陈子辰. 基于可变向测头的未知自由曲面数字化测量[J]. J4, 2010, 44(11): 2041-2049.