Please wait a minute...
J4  2010, Vol. 44 Issue (11): 2041-2049    DOI: 10.3785/j.issn.1008973X.2010.11.001
机械工程     
基于可变向测头的未知自由曲面数字化测量
卢科青,王文,汪玮,陈子辰
浙江大学 现代制造工程研究所,浙江 杭州 310027
Digitalization of unknown free-form surface based on  variable-direction point laser sensor
LU Ke-qing, WANG Wen, WANG Wei, CHEN Zi-chen
Institute of Advanced Manufacturing Engineering, Zhejiang University, Hangzhou 310027, China
 全文: PDF  HTML
摘要:

为了消除曲面倾斜对点激光测头测量精度的影响,针对连续的未知自由曲面,提出一种基于可变向测头的数字化测量方法.设计一种摆动机构安装点激光测头,使测头方向可以在一定范围内变动.在测量过程中,首先使测头竖直,对被测曲面进行等间距逐行扫描,并对扫描数据进行及时处理与曲线拟合,根据拟合曲线外法线与X轴正方向所成角度α值的大小,找出α∈\[0°,60°)、α∈(120°,180°\]的曲线段所在位置.一次扫描结束后,将测头向左倾斜,对α∈\[0°,60°)   的曲线段进行二次测量,将测头向右倾斜,对α∈\[120°,180°) 的曲线段进行二次测量.通过多次测量数据组合,获得被测曲面的整体形貌数据.实验结果表明,该方法能够有效实现α∈\[0°,180°) 的未知自由曲面的数字化测量,同时保证测量精度.

Abstract:

In order to eliminate the influence of surface inclination on measurement accuracy of point laser sensors, a new digitalization method for continuous unknown free-from surface based on a variable-direction point laser sensor was proposed. In this strategy, a hinge structure was designed to fix the point laser sensor, so the direction of the probe could be changed in a certain extent. At first, the probe was fixed vertically , and scanned the surface with equal step linebyline until the whole surface was finished. The derived data was processed and fitted into curves immediately, and the angle value α  between the exterior normal of the curves and the positive direction of X-axis was figured out to find out the location of the curves with α∈\[0°,60°) or α∈(120°,180°\]. Then second time measurement was performed to rescan the curves of  α∈\[0°,60°)   with the probe  tilting to the left and to rescan the curves of  α∈\[120°,180°)  with the probe tilting to the right. Finally, the data generated by different measuring directions was merged as the final result. The experimental results indicate that this method can completely measure the unknown free-from surface with  α∈\[0°,180°)   while the measurement accuracy maintains good.

出版日期: 2010-12-23
:  TP 391.73  
基金资助:

国家自然科学基金资助项目(50875241);浙江省自然科学基金重点资助项目(Z1090590);浙江省科技计划重大专项资助项目(2006C11256).

通讯作者: 王文,男,副教授,硕导.     E-mail: wangwn@zju.edu.cn
作者简介: 卢科青(1980-),男,浙江慈溪人,博士生,从事逆向工程数字化测量研究.E-mail: lukq1980@zju.edu.cn
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

卢科青,王文,汪玮,陈子辰. 基于可变向测头的未知自由曲面数字化测量[J]. J4, 2010, 44(11): 2041-2049.

LU Ke-qing, WANG Wen, WANG Wei, CHEN Zi-chen. Digitalization of unknown free-form surface based on  variable-direction point laser sensor. J4, 2010, 44(11): 2041-2049.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008973X.2010.11.001        http://www.zjujournals.com/eng/CN/Y2010/V44/I11/2041

[1] 柯映林. 反求工程CAD建模理论、方法和系统[M]. 北京: 机械工业出版社,2005:6-7.
[2] SATIO K, MIYOSHI T. Noncontact 3D digitizing and machining system for freeform surface [J]. Annals of the CIRP, 1991,40(1):483-486.
[3] WANG G J, WANG CH CH,CHUANG S H F. Reverse engineering of sculptured surface by fouraxis noncontacting scanning [J]. International Journal of Advanced Manufacturing Technology, 1999, 15(11):800-809.
[4] LI Y D, GU P H. Freeform surface inspection techniques state of the art review [J]. ComputerAided Design, 2004, 36(13): 1395-1417.
[5] FENG H Y, LIU Y X, XI F F. Analysis of digitizing errors of a laser scanning system [J]. Precision Engineering, 2001, 25(3): 185-191.
[6] 徐玉春,谢则晓,冯国馨,等.被测表面特征对激光测头特征的影响[J].天津大学学报,2001,34(6):796-799.
XU Yuchun, XIE Zexiao, FENG Guoxin, et al. Study on influence of surface properties on characteristics of laser triangulation probe [J]. Journal of Tainjing University, 2001,34(6):796-799.
[7] LAI J Y, UENG W D, YAO C Y. Registration and data merging for multiple sets of scan data [J]. International Journal of Advanced Manufacturing Technology, 1999,15(1):54-63.
[8] 谢则晓,张国雄,徐玉春,等.基于PH10回转体的非接触式测量系统建模与标定[J]. 天津大学学报,2001,34(6):714-717.
XIE Zexiao, ZHANG Guoxiong, XU Yuchun, et al. Model and calibration of a noncontact measuring system based on PH10 probe head [J]. Journal of Tainjing University. 2001,34(6):714-717.
[9] 张国雄, 那永林, 郭敬滨, 等. 四发射单接收光学非接触测头[J]. 纳米技术与精密工程, 2006, 4(1): 54-57.
ZHANG Guoxiong, NA Yonglin, GUO Jingbin, et al. A new optical noncontact probe with four incidence lights and a receptor [J]. Nanotechnology and Precision Engineering, 2006, 4(1): 54-57.
[10] 周会成,曾理湛,陈吉红,等.点光源测头光束方向的标定[J].仪器仪表学报,2004, 25(3): 388-391.
ZHOU Huicheng, ZENG Lizhan, CHEN Jihong, et al. Calibration of light beams direction of point light source probe [J]. Chinese Journal of Scientific Instrument, 2004, 25(3): 388-391.
[11] 施法中. 计算机辅助几何设计与非均匀有理B样条[M]. 北京: 高等教育出版社,2001:235-238.

[1] 卢科青, 王文, 陈子辰. 基于双测头组合的未知自由曲面自适应采样[J]. J4, 2010, 44(8): 1433-1440.