Please wait a minute...
J4  2009, Vol. 43 Issue (10): 1841-1847    DOI: 10.3785/j.issn.1008-973X.2009.10.017
工业工程与制造业信息化     
支持多学科设计优化的产品集成设计知识模型研究
刘海强,纪杨建,祁国宁,胡浩
(浙江大学 现代制造工程研究所,浙江省先进制造技术重点研究实验室,浙江 杭州 310027)
Product integrated design knowledge model supporting multidisciplinary design optimization
LIU Hai-qiang, JI Yang-jian,QI Guo-ning, HU Hao
(Institute of Manufacturing Engineering, Zhejiang Province Key Laboratory of Advanced
Manufacturing Technology, Zhejiang University, Hangzhou 310027,China)
 全文: PDF(1395 KB)   HTML
摘要:

为了在工程设计中提高产品多学科设计知识的集成能力,通过研究产品多学科设计优化(MDO)的设计过程,提出一种支持多学科设计优化的产品集成设计知识模型.利用对产品设计知识应用特征的分析,研究产品集成设计知识的融合方法,阐述了产品设计知识的表达以及具体设计规则的匹配机制,分析了多学科设计知识获取和目标满意度评价的过程及方法.应用产品集成设计知识模型作为指导框架,采用GeneXus开发工具,搭建了一个支持多学科设计优化的原型系统平台,并以具体产品的设计过程为例,在平台中验证了该设计知识模型的可行性和有效性.

Abstract:

To enhance the capability of integrating the product multidisciplinary design knowledge in engineering design, a product integrated design knowledge model for supporting multidisciplinary design optimization(MDO) was proposed through studying the design process of MDO. The fusion method of product integrated design knowledge was explored by analyzing the application characteristics of product design knowledge. The knowledge expressing of product design and the matching mechanisms of design rule were introduced, and the process and method of multidisciplinary design knowledge acquisition and objective satisfaction degree evaluation were also analyzed. After, utilizing the product integrated design knowledge model as guiding framework, a prototype system platform for supporting MDO was established with software development tool GeneXus. An example of product design was used to validate the feasibility and effectiveness of the design knowledge model in this platform.

出版日期: 2009-11-29
:  TH 122  
基金资助:

高等学校博士学科点专项科研基金资助项目 (20060335134);国家“863”高技术研究发展计划资助项目(2007AA04Z117);浙江省科技计划资助项目(2007C21052).

通讯作者: 纪杨建,男,副教授.     E-mail: mejyj@zju.edu.cn
作者简介: 刘海强(1980-),男,江西安福人,博士生,从事产品建模、制造业信息化等的研究.
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

刘海强, 纪杨建, 祁国宁, 等. 支持多学科设计优化的产品集成设计知识模型研究[J]. J4, 2009, 43(10): 1841-1847.

LIU Hai-Jiang, JI Yang-Jian, QI Guo-Ning, et al. Product integrated design knowledge model supporting multidisciplinary design optimization. J4, 2009, 43(10): 1841-1847.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2009.10.017        http://www.zjujournals.com/eng/CN/Y2009/V43/I10/1841

[1] 李伯虎,柴旭东. 复杂产品虚拟样机工程[J]. 计算机集成制造系统,2002,8(9): 678683.
LI Bo-hu,CHAI Xu-dong. Virtual prototyping engineering of complex product[J].Computer Integrated Manufacturing Systems,2002,8(9):678683.
[2] SZYKMAN S, SRIRAM R D. Design repositories: engineering design’s new knowledge base[J]. Intelligent Systems, IEEE, 2000, 15(3):4855.
[3] 史琦,杜江,李原,等. 基于实例推理的产品概念设计模型研究[J].西北工业大学学报,2002,20(2):203207.
SHI Qi,DU Jiang, LI Yuan, et al. ACBR (Case-based reasoning)conceptual design model for product develop-ment[J]. Journal of Northwestern Polyte-Chnical University, 2002, 20(2): 203207.
[4] 王振国,陈小前,罗文彩. 飞行器多学科设计优化理论与应用研究[M]. 北京:国防工业出版社,2006.
[5] 廖馨,王振华. 多学科设计优化中设计过程建模及重构技术[J].航空制造技术,2007,14(3):8788.
LIAO Xin, WANG Zhen-hua. Design process modeling and reconstructing technology in multidisciplinary design optimization[J]. Aeronautical Manufacturing Technology, 2007, 14(3): 8788.
[6] 王珂,廖文和,郭宇,等. 基于任务结构的产品设计知识模型研究[J].中国机械工程,2008,19(3):308310.
WANG Ke, LIAO Wen-he, GUO Yu, et al. Study on modeling of the product design knowledge based on task-structure[J]. China Mechanical Engineering, 2008,19(3):308310.
[7] CHAPMAN C B,PINFOLD M. Design engineering: a need to rethink the solution using knowledge based engineering[J]. Knowledge-based System,1999,12(3):257267.
[8] TROXLER P. Knowledge technologies in engineering design[C]//Proceedings of 7th International Design Conference. Dubrovnik: Faculty of Mechanical Engineering and Naval Architecture,2002: 429434.

[1] 杨巍,张秀峰,杨灿军,吴海杰. 基于人机5杆模型的下肢外骨骼系统设计[J]. J4, 2014, 48(3): 430-435.
[2] 刘征, 顾新建, 潘凯, 杨青海. 基于TRIZ的产品生态设计方法研究——融合规则和案例推理[J]. J4, 2014, 48(3): 436-444.
[3] 程吉祥,顾新建,代风,刘征. 基于BioTRIZ的产品创新设计过[J]. J4, 2014, 48(1): 35-41.
[4] 林晓华, 冯毅雄, 谭建荣. 基于免疫优化的产品系统可靠性参数区间预测方法[J]. J4, 2013, 47(6): 1013-1021.
[5] 应征, 王青, 李江雄, 柯映林,孙文博,韩永伟. 飞机数字化装配系统运动数据集成及监控技术[J]. J4, 2013, 47(5): 761-767.
[6] 应征, 章明, 王青, 柯映林. 飞机大部件调姿机构磨损预测模型的构建与仿真[J]. J4, 2013, 47(2): 209-215.
[7] 刘曦泽, 祁国宁, 傅建中, 樊蓓蓓, 许静. 集成形态学矩阵与冲突解决原理的设计过程模型[J]. J4, 2012, 46(12): 2243-2251.
[8] 黄雪梅, 张磊安, 魏修亭. 兆瓦级风机叶片静力加载过程D-MFAC控制[J]. J4, 2012, 46(12): 2280-2284.
[9] 罗成对,冯毅雄,谭建荣,安相华. 基于语义PROMETHEE的产品设计方案群体多准则求解[J]. J4, 2012, 46(3): 524-532.
[10] 林晓华,冯毅雄,谭建荣. 产品方案设计约束模型及其演化博弈算法求解[J]. J4, 2012, 46(3): 533-541.
[11] 安相华,冯毅雄,谭建荣. 基于Choquet积分与证据理论的
产品方案协同评价方法
[J]. J4, 2012, 46(1): 163-169.
[12] 马志勇, 邱清盈, 冯培恩, 沈萌红, 曾令斌. 机械对称性的概念体系及其应用方法[J]. J4, 2010, 44(12): 2354-2359.
[13] 张秀芬, 张树有, 伊国栋. 产品多粒度层次可拆卸性评价模型与方法[J]. J4, 2010, 44(3): 581-588.
[14] 江伟光, 武建伟, 吴参, 等. 基于本体的产品知识集成[J]. J4, 2009, 43(10): 1801-1807.
[15] 傅玉颖, 潘晓弘, 王正肖. 模糊合作博弈下的供应链多目标优化[J]. J4, 2009, 43(09): 1644-1648.