Please wait a minute...
Chinese Journal of Engineering Design  2010, Vol. 17 Issue (5): 360-364    DOI:
    
Model design and realization about stochastic resonance of the under-damped second-order linear system represses noise
 SUN  Wan-Lin1, HUANG  Yu-Hua2, SHAN  Bai-·Da-La-Bai3
1.The Department of Physics, Changji College, Changji 831100, Chain;
2.Department of Radio Engineering, Southeast University, Nanjing 210096, China;
3.School of Information Science & Engineering, Xinjiang University, Urumqi 830046, China
Download: HTML     PDF(1581KB)
Export: BibTeX | EndNote (RIS)      

Abstract  With the classic mechanics model, qualitydampingspring coiling the under-damped second-order linear system for research object, when the damping coefficient and intrinsic frequency of the system were subject to multiplicative Gaussian white noise, this article studied detailedly that stochastic resonance of the under-damped second-order linear system were used to resolve multiplicative noise. Theoretical analysis showed that this system produced the phenomenon of stochastic resonance. The average output amplitude gain (OAG) of this system presented not-monotonous variety. Under certain conditions, OAG was greater than that of second-order linear system with no noise, and adjusted the appropriate system parameters and noise intensity could improve the output amplitude gain. Therefore, the article used visual simulation software SIMULINK to establish a linear system simulation map of stochastic resonance and simulate some examples. Simulation further shows that appropriate system parameters can achieve weak signal detection of under-damped second-order linear system in the noise background so long as the system is in the resonance region. So it confirms that this method resolves multiplicative noise feasibly and effectively.

Key wordsunder-damped linear system      stochastic resonance      multiplicative noise      OAG      detection     
Published: 28 October 2010
Cite this article:

SUN Wan-Lin, HUANG Yu-Hua, SHAN Bai-·Da-La-Bai. Model design and realization about stochastic resonance of the under-damped second-order linear system represses noise. Chinese Journal of Engineering Design, 2010, 17(5): 360-364.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2010/V17/I5/360


利用欠阻尼二阶线性随机共振抑噪的模型设计及实现

以经典力学模型——质量阻尼弹簧欠阻尼二阶线性系统为研究对象,当系统的阻尼系数和固有频率同时受乘性高斯噪声干扰时,利用此系统产生的随机共振来消除此类噪声.理论分析表明,欠阻尼二阶线性系统中存在随机共振现象,系统的平均输出幅度增益呈现非单调变化,不仅在一定条件下大于无噪声时的增益,而且调节适当的系统参数和噪声强度能够提高幅度增益.因此,采用可视化仿真软件SIMULINK建立仿真模型,并进行实例模拟.仿真进一步表明,通过调节适当的系统参数或噪声强度,使系统处于共振区域,就会把夹杂在噪声中的被测信号突现出来,从而实现了弱信号的检测,证实该方法消除乘性噪声的可行性和有效性.

关键词: 欠阻尼线性系统,  随机共振,  乘性噪声,  输出幅度增益,  检测 
[1] Kehao LAN,Shujuan LI,Jiabin WANG,Xiangyang GAO,Pengxin REN. Rapid detection method for contour dimensions of CRTSⅢ ballastless track slab based on point laser[J]. Chinese Journal of Engineering Design, 2023, 30(5): 554-561.
[2] Yi-nan CHEN,Zhi-xin PU,Zhen-ni ZHENG. A novel vascular interventional surgery robot with force detection mechanism[J]. Chinese Journal of Engineering Design, 2023, 30(1): 20-31.
[3] Xu-hui ZHANG, Jian-xing YAN, Bing MA, Jia-shan JU, Qi-feng SHEN, Yu-jia WU. Research on abnormal detection method of side guard based on improved YOLOv5s[J]. Chinese Journal of Engineering Design, 2022, 29(6): 665-675.
[4] Sheng-hu PAN,Xiao-jun ZHANG,Dong Lü. Design of a control system of plane machining machine tool based on machine vision[J]. Chinese Journal of Engineering Design, 2022, 29(6): 784-792.
[5] Qiang CHEN,Shi-qiang HU,Ling-kun LUO,Bing LIU,Yuan FANG. UAV autonomous stringing system based on ground station assistance[J]. Chinese Journal of Engineering Design, 2022, 29(5): 634-642.
[6] Xu-hao CUI,Xin-fu CHI,Yi-ze SUN. Research on data-driven fault detection method of traverse mechanism of warp knitting machine[J]. Chinese Journal of Engineering Design, 2022, 29(3): 263-271.
[7] Yi-fan CHEN,Qian WU,Ling JIANG,Liang HUA. Detection method of post-weld residual stress treatment quality based on acoustic signal recognition[J]. Chinese Journal of Engineering Design, 2022, 29(3): 272-278.
[8] Jin-nan LU,Yang LIU,Lian-jie WANG,Run-kun YANG,Zhen-zhi DING. Research on shovel tooth wear detection based on improved Mask Scoring R-CNN[J]. Chinese Journal of Engineering Design, 2022, 29(3): 309-317.
[9] Yun-jie XU,Yu SHEN,Fei HU,Liang-quan JIA,Heng-nian QI. Design of vigor detection device for batch seeds based on TDLAS[J]. Chinese Journal of Engineering Design, 2022, 29(2): 231-236.
[10] LI Bao-zhi, NI Hong-qi, LIN Si-yu, MENG Xian-chun. Axial dimension detection method of corrugated compensator based on image recognition[J]. Chinese Journal of Engineering Design, 2022, 29(1): 10-19.
[11] ZHANG Ai-yun, WANG Ji-hua, GAO Wei, ZHANG Mei-juan. Design of VVT engine rotor defect detection system based on machine vision[J]. Chinese Journal of Engineering Design, 2021, 28(6): 776-784.
[12] LUO Yan-yan, PAN Xiao-song, MA Xuan, WU Xiong-wei. Research on application of infrared thermal imaging technology in plug-in wear detection of electrical connector[J]. Chinese Journal of Engineering Design, 2021, 28(5): 615-624.
[13] ZHENG Yu-chen, JU Feng, WANG Dan, SUN Jing-bin, WANG Ya-ming, CHEN Bai. Design and control research of aeroengine blade detection robot[J]. Chinese Journal of Engineering Design, 2021, 28(5): 625-632.
[14] ZHANG Dang-dang, HU Jian-hong, KE Hai-sen, LIANG Ming-xuan. Design of bearing end face detection and sorting device based on color recognition[J]. Chinese Journal of Engineering Design, 2021, 28(4): 489-494.
[15] LU Jin-nan, SHAN De-xing. Research on railway carriage position detection based on semantic segmentation[J]. Chinese Journal of Engineering Design, 2020, 27(5): 568-576.