Please wait a minute...
Chinese Journal of Engineering Design  2015, Vol. 22 Issue (3): 236-242    DOI: 10.3785/j.issn. 1006-754X.2015.03.006
    
Modal analysis of supporting in advance equipment under different working conditions
XIE Miao, BAI Ya-jing, MAO Jun, DONG Xian-rui, LU Jin-nan
College of Mechanical Engineering, Liaoning Technical University, Fuxin 123000, China
Download: HTML     PDF(1992KB)
Export: BibTeX | EndNote (RIS)      

Abstract  The supporting in advance equipment is used to support the roadway head-on roof temporarily. In order to improve the stability and optimize the structure of the supporting in advance equipment, the modals under different conditions were studied. Under the circumstance of ensuring the mechanical characteristics of the supporting in advance equipment, multi degree of freedom dynamic model of the equipment was established, the differential equations of motion was deduced, and the numerical solutions were found out to get the vertical frequency response under specific incentive. 3D modeling software Pro/E was used to establish a simplified solid model and imported into the analysis software ANSYS to analyze modal under the full support condition and single group support condition respectively. The low order natural frequency and main vibration type of the supporting in advance were obtained that provided a reference for the analysis of dynamic characteristics. The Polymax modal identification method was used to test the experimental prototype model under the full support condition and single group support condition. The test data was compared with the simulation results, the dynamic characteristics and natural frequency of it were analyzed, and the theory basis for the design and development of similar support protecting equipment were provided.

Key wordssupporting in advance      dynamic characteristic      modal analysis     
Received: 20 October 2014      Published: 28 June 2015
Cite this article:

XIE Miao, BAI Ya-jing, MAO Jun, DONG Xian-rui, LU Jin-nan. Modal analysis of supporting in advance equipment under different working conditions. Chinese Journal of Engineering Design, 2015, 22(3): 236-242.

URL:

https://www.zjujournals.com/gcsjxb/10.3785/j.issn. 1006-754X.2015.03.006     OR     https://www.zjujournals.com/gcsjxb/Y2015/V22/I3/236


不同工况下超前支护装备的模态分析

超前支护装备用于综掘巷道迎头顶板的临时支护,为提高超前支护工作稳定性和优化其结构,对其不同工况下的模态进行研究.在保证超前支护装备结构力学特性的前提下,建立超前支护装备的多自由度动力学模型,推导出系统运动微分方程,并对方程进行数值求解,得到特定激励下垂直方向的频响.通过ANSYS和Pro/E进行联合仿真,分别对其在全支撑和单组支撑状态下进行模态分析,得到超前支护的低阶固有频率和主振型,为动态特性的分析提供了参考.采用Polymax模态识别方法对实验样机模型在全支撑和单组支撑等工况下进行了测试,将测试数据与仿真实验结果进行比较,分析其动力学特征及固有频率,为相似支护设备的设计与研发提供理论依据.

关键词: 超前支护,  动态特性,  模态分析 
[1] Ze-jun WEN,Xiang-heng MENG,Zhao XIAO,Fan ZHANG. Sensitivity analysis of airfoil aerodynamic characteristics based on NT-net method and Morris method[J]. Chinese Journal of Engineering Design, 2022, 29(4): 438-445.
[2] Zhu-xin TIAN,Ming-hui GUO,Hai-yin CAO. Study on influencing factors of dynamic characteristics of annular recess hydrostatic thrust bearing[J]. Chinese Journal of Engineering Design, 2022, 29(4): 456-464.
[3] Xue-jun WANG,Jiang-hua PU,Ming-fang CHEN. Dynamic characteristic analysis of synchronous belt transmission elevator for automatic production line[J]. Chinese Journal of Engineering Design, 2022, 29(2): 212-219.
[4] XIE Miao, ZHANG Bao-guo, WANG Peng-fei, LI Zheng. Research on active excitation cutting performance of roadheader based on similarity theory[J]. Chinese Journal of Engineering Design, 2021, 28(5): 576-584.
[5] JIA Du-ping, MO Li, MAO Liang-jie, ZENG Song. Experimental research on vortex-induced vibration of deepwater riser-test string system[J]. Chinese Journal of Engineering Design, 2021, 28(2): 170-178.
[6] ZHANG Chao, HAN Xiao-ming, LI Qiang, LI Chi. Design and dynamic characteristics analysis of permanent magnet eddy current shock absorber under impact load[J]. Chinese Journal of Engineering Design, 2020, 27(6): 786-794.
[7] JIANG Xiao-fei, ZHANG Guan-wei, HU Yong-xiu, ZHANG Da-wei. Evaluation method of dynamic characteristics of whole NC machine tool[J]. Chinese Journal of Engineering Design, 2020, 27(2): 135-145.
[8] LUO Ru-nan, NIU Wen-tie, WANG Chen-sheng. Analysis of influencing factors of dynamic error of feed system based on electromechanical-rigid-flexible coupling characteristics[J]. Chinese Journal of Engineering Design, 2019, 26(5): 561-569.
[9] LI Xiang, WANG Yang, TONG Guan, CHEN Bo-wen, HE Bin. Study on vibration characteristics of new quasi-square honeycomb sandwich structure with all edges simply supported[J]. Chinese Journal of Engineering Design, 2018, 25(6): 725-734.
[10] WU Zhong-yi, CHEN Jia-dui, WANG Zi-qin. Research on a hydraulic continuous variable compression ratio technique[J]. Chinese Journal of Engineering Design, 2018, 25(2): 142-150.
[11] HUANG Zhi-qiang, LI Gang, TAO Zhi-fei, HAO Lei. Finite element modal analysis and experimental verification of vibroseis vibrator[J]. Chinese Journal of Engineering Design, 2017, 24(5): 530-535.
[12] LIU Wen, ZHANG Jin-hong, LIN Teng-jiao, YANG Yun, CAI Yun-long. Prediction and research on influencing factors of structural noise of bridge crane with three-point support[J]. Chinese Journal of Engineering Design, 2017, 24(5): 580-587,594.
[13] CHEN Jian-wei, ZHU Da-chang, ZHANG Rong-xing, ZHU Cheng-wei. Topology optimization design for the 3-RPRR similarly planar fully compliant parallel mechanism[J]. Chinese Journal of Engineering Design, 2016, 23(3): 251-255,270.
[14] ZHANG Yu, CAI Xin, GAO Qiang, DING Wen-xiang. Research summary of wind turbine tower structure[J]. Chinese Journal of Engineering Design, 2016, 23(2): 108-115,123.
[15] MAO Jun, DONG Xian-rui, XIE Miao, YAN Jiang-long, LI Cui. Modal analysis of frame on intelligent stereo parking space[J]. Chinese Journal of Engineering Design, 2016, 23(1): 54-59,81.