Please wait a minute...
Chinese Journal of Engineering Design  2000, Vol. 7 Issue (1): 19-22    DOI: 1006-754X(2000)01-0019-04
    
A Rational Evaluation Method of Multi attribute and Multi evaluator in Product Design
Zhejiang University, Hang zhou 310027
Download: HTML     PDF(188KB)
Export: BibTeX | EndNote (RIS)      

Abstract  The rational preferences aggregation axioms of Multi attribute and Multi evaluator are discussed.The quasilinear weighted means conforming all these axioms is analyzed.A Multi-attribute and Multi evaluator evaluation method is set forth based on quasilinear weighted means . At last, it proves the method is reasonable through the example of evaluating material selection of load cell.

Key words evaluation      aggregation function      rational axioms      quasilinear weighted means      sensor     
Published: 28 March 2000
CLC:  TB21  
Cite this article:

HUANG Guang-Long, YU Zhong-Hua, WU Zhao-Tong. A Rational Evaluation Method of Multi attribute and Multi evaluator in Product Design. Chinese Journal of Engineering Design, 2000, 7(1): 19-22.

URL:

https://www.zjujournals.com/gcsjxb/1006-754X(2000)01-0019-04     OR     https://www.zjujournals.com/gcsjxb/Y2000/V7/I1/19


产品设计中一种理性化的多属性多人评价方法

讨论了多个属性评价结果的聚合以及多个评价者评价结果的聚合的理性化准则,分析了准线性权重聚合函数对这些准则的符合性,提出了基于准线性权重聚合函数的多属性多人评价方法,并进行实际应用,其结果表明该方法是合理的。

关键词: 评价,  聚合函数,  理性化准则,  准线性权重,  传感器 
[[ 1]]   Didier Dubois, Jean??Luc Koning . Social choice ax ioms for fuzzy set agg reg at ion[ J] . Fuzzy Sets and System, 1991, 43:257~ 274
[[ 2]]   Herrera F, Her rera??Viedma E. , Verdegay J L. Dir ect ap??pro ach processes in gr oup decisio n making using linguisticOWA operators[ J] . Fuzzy Sets and System, 1996, 79: 175~190
[1] Kehao LAN,Shujuan LI,Jiabin WANG,Xiangyang GAO,Pengxin REN. Rapid detection method for contour dimensions of CRTSⅢ ballastless track slab based on point laser[J]. Chinese Journal of Engineering Design, 2023, 30(5): 554-561.
[2] Zhijun WANG,Xiaotao ZHANG,Mengxiang LI. Research on decoupling algorithm of six-dimensional force sensor based on polynomial fitting[J]. Chinese Journal of Engineering Design, 2023, 30(5): 571-578.
[3] Chen WANG,Bo GAO,Xu YANG. Lightweight design of Stewart type six-axis force sensor[J]. Chinese Journal of Engineering Design, 2022, 29(4): 419-429.
[4] Li-yong TIAN,Ye-xin SUN,Ning YU,Hong-yue CHEN,Chun-ying MA. Research on navigation system of roadheader based on combination mode[J]. Chinese Journal of Engineering Design, 2022, 29(2): 254-262.
[5] Qing-xiang LIU,Bing-jing GUO,Jian-hai HAN,Xiang-pan LI,Ming-xiang HUANG. Somatosensory interactive upper-limb mirror rehabilitation training robot system[J]. Chinese Journal of Engineering Design, 2022, 29(2): 143-152.
[6] ZHENG Hua-lin, FENG Yi-fu, PAN Sheng-hu. Design of weak magnetic signal acquisition system for metal pipeline based on STM32[J]. Chinese Journal of Engineering Design, 2021, 28(5): 646-653.
[7] GU Jun, XU Sheng, XING Qiang, YANG Yu-li, WANG Zhou-yi, XU Hai-li. Development of "behavior-force" synchronous visual display system[J]. Chinese Journal of Engineering Design, 2021, 28(2): 235-240.
[8] WANG Xin-yu, PING Xue-liang. Speed control method of mobile robot based on multi-sensor fusion information[J]. Chinese Journal of Engineering Design, 2021, 28(1): 63-71.
[9] LIU Ruo-chen, XU Cheng, WANG Kui-yang, WANG Yi-min, SUN Jian-zhong. Research on performance parameters of new wear-site electrostatic sensor[J]. Chinese Journal of Engineering Design, 2020, 27(5): 645-653.
[10] LI Xian-kun, ZENG De-biao, CHU Wang-wei, WU Cheng-xu. Research on position detection method of jig positioner based on fiber-optic strain sensor[J]. Chinese Journal of Engineering Design, 2020, 27(3): 287-292.
[11] RUAN Yong-chao, LIU Wu-fa, ZHENG Peng. Design of an intelligent sensor system[J]. Chinese Journal of Engineering Design, 2020, 27(3): 398-406.
[12] NI Hong-qi, JIN Chi, FENG Fei. Development of fault diagnosis system for corrugated compensator[J]. Chinese Journal of Engineering Design, 2019, 26(3): 354-363.
[13] LIU Zhong-si, YANG Jian-zhong, ZHANG Fan, LI Bin, CHEN Wan-wan. Design and simulation of three-axis Helmholtz coil used in magnetic sensor testing system[J]. Chinese Journal of Engineering Design, 2019, 26(2): 230-236.
[14] LI Lei, XIAO Shi-de, LI Xing-kun, DONG Qing-feng. Design of intelligent vehicle positioning and navigation system based on multi-sensor fusion[J]. Chinese Journal of Engineering Design, 2019, 26(2): 182-189.
[15] GAO Feng-qiang, DONG Kun-huang, ZHOU Mu-dan, GUO Yi-jing. Automatic tracking system for intelligent car based on inductance-to-digital conversion sensor[J]. Chinese Journal of Engineering Design, 2018, 25(2): 216-222.