Please wait a minute...
Chinese Journal of Engineering Design  2011, Vol. 18 Issue (4): 288-292    DOI:
    
Testing study on relationship of characteristic information in tribological system
 FENG   Wei1,2, HE  Shi-Zhong1
1.Equipment Condition Detection Institution, Guangzhou Mechanical Engineering Research Institute, Guangzhou 510700, China;〖JP〗
2. Department of Marine Engineering, Guangzhou Maritime College, Guangzhou 510725, China
Download: HTML     PDF(1595KB)
Export: BibTeX | EndNote (RIS)      

Abstract  Aiming at diversity of the characteristic information and regularity during the service life in the tribological system, the tribological characteristic information system of gearbox selected as the object of study was established. Relationship and inherent mechanism between viscosity of lubricating oil and wear information were investigated experimentally through adopting the oil analysis method for the collected oil during the fatigue wear test of gears. The behaviors of wear debris and oil deterioration were studied at the testing life, the surface morphology and composition of wear debris were investigated by SEM and EDS. The results indicate that the increase of the viscosity of lubricating oil has similarity with that of the wear information, namely,these characteristic information have the time cumulative characteristics. At the three stage of run-in period, normal period and fault period, the viscosity of lubricating oil is affected synthetically by wear debris, oil deterioration, friction polymers and oil sludge, change of its viscosity and change of wear parameter have the good mapping relationship.

Key wordstribological system      characteristic information      gearbox      viscosity      wear     
Published: 28 August 2011
CLC:  TH 117.1  
Cite this article:

FENG Wei, HE Shi-Zhong. Testing study on relationship of characteristic information in tribological system. Chinese Journal of Engineering Design, 2011, 18(4): 288-292.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2011/V18/I4/288


摩擦学系统特征信息关系的试验研究

针对摩擦学系统特征信息的多样性以及设备在运行寿命期内表现出的磨损规律性,以齿轮箱摩擦学系统为研究对象,建立试验齿轮箱摩擦学特征信息系统.对采集到的齿轮疲劳磨损试验润滑油采用油液分析方法试验研究了系统润滑油黏度与磨损特征信息间的表现关系及内在机理,考察磨粒及油液变质物在试验寿命期内的变化行为,采用扫描电镜和能谱分析磨粒的表面形貌及成分变化.试验与分析结果表明,润滑油黏度的增加具有与磨损信息相似的时间累积性,在磨合期、正常期和故障期三个阶段,润滑油黏度受到不同程度的磨损磨粒、油品变质物、摩擦聚合物及油泥的综合影响,其黏度变化与磨损参数变化具有良好的映射关系.

关键词: 摩擦学系统,  特征信息,  齿轮箱,  黏度,  磨损 
[1] Yi ZHANG,Siyang XIONG,Sipeng ZHONG,Zijie XIONG,Qiang YANG. Effect of sealing surface wear on the performance of V-shaped combined sealing ring[J]. Chinese Journal of Engineering Design, 2023, 30(2): 237-243.
[2] Jiang LIU,Zheng-ming XIAO,Long-long ZHANG,Wei-biao LIU. Transmission accuracy reliability analysis and parameter optimization of RV reducer considering cycloid gear wear[J]. Chinese Journal of Engineering Design, 2022, 29(6): 739-747.
[3] Xiao-hua ZHU,Cong LI,Wei-ji LIU,Bin TAN,Wen XU. Study on bottom hole thermal-fluid-solid coupling of PDC bit in strong abrasive formation[J]. Chinese Journal of Engineering Design, 2022, 29(4): 446-455.
[4] Jin-nan LU,Yang LIU,Lian-jie WANG,Run-kun YANG,Zhen-zhi DING. Research on shovel tooth wear detection based on improved Mask Scoring R-CNN[J]. Chinese Journal of Engineering Design, 2022, 29(3): 309-317.
[5] LUO Yan-yan, PAN Xiao-song, MA Xuan, WU Xiong-wei. Research on application of infrared thermal imaging technology in plug-in wear detection of electrical connector[J]. Chinese Journal of Engineering Design, 2021, 28(5): 615-624.
[6] LIU Shu-qin, LIU Ruo-chen, SUN Jian-zhong, ZHANG Jin-wu. Research on on-line electrostatic monitoring method for wear state of wind turbine gearbox[J]. Chinese Journal of Engineering Design, 2021, 28(2): 163-169.
[7] DENG Xiao-fan, REN Cheng-zu, CHEN Yang, CHEN Guang, CAI Zhi-jie, HE Ying-lun. Research on material selection of lapping tools for double-disc and linear-groove lapping method based on friction and wear experiment[J]. Chinese Journal of Engineering Design, 2020, 27(6): 720-728.
[8] MA Ya-chao, ZHANG Peng, HUANG Zhi-qiang, NIU Shi-wei, XIE Dou, DENG Rong. Prediction of dynamic wear trend of PDC bit under the influence of varying temperature and load[J]. Chinese Journal of Engineering Design, 2020, 27(5): 625-635.
[9] LIU Ruo-chen, XU Cheng, WANG Kui-yang, WANG Yi-min, SUN Jian-zhong. Research on performance parameters of new wear-site electrostatic sensor[J]. Chinese Journal of Engineering Design, 2020, 27(5): 645-653.
[10] TANG Liang, HE Ren-jie, GONG Fa-yun, LI Fei-yang, LIU Guan-jun, YANG Min. Internal excitation law research and dynamic characteristic optimization of wind turbine gearbox under varying wind load[J]. Chinese Journal of Engineering Design, 2020, 27(2): 212-222.
[11] ZHANG Yuan, PENG Zhen-hua, GAO Ding-xiang, REN Hai-tao, TANG Yi-xin. Design and mixing performance research of core tube heavy oil mixing and diluting mixer[J]. Chinese Journal of Engineering Design, 2018, 25(5): 510-517.
[12] ZHANG Qiang, LIU Zhi-heng, WANG Hai-jian, ZHANG He-zhe. Research on wear degree recognition of picks based on multi feature signal fusion[J]. Chinese Journal of Engineering Design, 2018, 25(3): 278-287.
[13] LI Yan-kui, LÜ Yan-ming, NI Ming-ming. The wear analysis of precision blasting die for aviation blades based on orthogonal test[J]. Chinese Journal of Engineering Design, 2017, 24(6): 632-637.
[14] TIAN Jia-lin, LIU Gang, LIU Si-lu, ZHOU Kun, HUANG Jun-hang, SUN Ye, LIU Yan-qiu, YANG Jia-jun. Geometric properties and three-dimensional rock-breaking mechanics of a new ring-embedded PDC drill bit[J]. Chinese Journal of Engineering Design, 2017, 24(1): 70-76.
[15] HU Yun, LIN Teng-jiao, ZHAO Jun, LÜ He-sheng. Meshing performance analysis and gear modification optimization of the helical gear pair of vertical mill gearbox[J]. Chinese Journal of Engineering Design, 2016, 23(3): 276-281,287.