Please wait a minute...
工程设计学报
Chinese Journal of Engineering Design  2006, Vol. 13 Issue (1): 62-64    DOI:
    
Research on numerical simulation of warm drawing of cup
 JIN  Hong-Yu, WU  Yi-Juan
Department of Fire Fighting Command， Chinese People's Armed Police Force Academy,Langfang 065000, China
Download: HTML     PDF(349KB)
Export: BibTeX | EndNote (RIS)      

Abstract  Temperature is an important factor affecting warm drawing. Warm drawing process of stainless steel cup is simulated by FEM software PAM-STAMP. The influence of temperature on warm drawing is analyzed, which provides foundation for the establishment of warm drawing process of cup.  

Key words：  cup      warm drawing      numerical simulation     
Published: 28 February 2006
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
JIN Hong-Yu
WU Yi-Juan
Cite this article:

JIN Hong-Yu, WU Yi-Juan. Research on numerical simulation of warm drawing of cup. Chinese Journal of Engineering Design, 2006, 13(1): 62-64.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2006/V13/I1/62


筒形件温差拉深数值模拟研究

温差拉深时，温度是影响成形的重要因素。用PAMSTAMP对不锈钢筒形件的温差拉深工艺进行了模拟，分析了温度对温差拉深的影响，为筒形件温差拉深工艺的制定提供了依据。

关键词： 筒形件,  温差拉深,  数值模拟 
[1] Chen WANG,Bo GAO,Xu YANG. Lightweight design of Stewart type six-axis force sensor[J]. Chinese Journal of Engineering Design, 2022, 29(4): 419-429.
[2] XIONG Wei, GE Zhi-hua, PANG Qiao, LI Man-di, WANG You. Theoretical design and experimental study on interference of hub bearing unit[J]. Chinese Journal of Engineering Design, 2021, 28(1): 41-47.
[3] ZHANG Yi-cong, ZHU Wei, WU Yu-guo, SHI Li-ping. Numerical simulation of sealing performance of Reuleaux triangular micro-dimpled textured end face[J]. Chinese Journal of Engineering Design, 2020, 27(1): 103-110.
[4] HOU Yong-jun, LI Fen, WU Xian-jin, LIU You-ping. Numerical simulation study of the performance of gas-liquid ejector in negative pressure drilling fluid shale shaker[J]. Chinese Journal of Engineering Design, 2019, 26(4): 423-432.
[5] ZHANG Xiao-dong, CHEN Long. Research on valve seat cone angle of new inner blowout preventer based on erosion wear theory[J]. Chinese Journal of Engineering Design, 2019, 26(3): 287-298.
[6] ZHONG Gong-xiang, ZOU Di, ZHANG Xing. Design and simulation of triangular air-powered rotary enginebased on CFD and ADAMS[J]. Chinese Journal of Engineering Design, 2019, 26(3): 305-314.
[7] LI Shun-ming, WANG Yi-bo, GU Xin-zhong. Energy-saving optimization design of a lawn mower based on flow field analysis[J]. Chinese Journal of Engineering Design, 2018, 25(6): 683-689.
[8] ZHANG Yuan, PENG Zhen-hua, GAO Ding-xiang, REN Hai-tao, TANG Yi-xin. Design and mixing performance research of core tube heavy oil mixing and diluting mixer[J]. Chinese Journal of Engineering Design, 2018, 25(5): 510-517.
[9] DENG Rong, HOU Kai, LI Meng-hua, LI Xiang-dong. Study on rock breaking performance of hybrid single cone bit[J]. Chinese Journal of Engineering Design, 2018, 25(3): 262-269.
[10] XING Meng-long, LIU Jia-xin, LU Chun-guang, JIANG Yan-kun. Improvement and signal-to-noise ratio analysis of cooling fan for grader[J]. Chinese Journal of Engineering Design, 2017, 24(5): 563-571.
[11] ZHANG Lu, WU Peng, WU Da-zhuan, HONG Wei-rong. Study on pressure fluctuation control of a regenerative pump for fuel system[J]. Chinese Journal of Engineering Design, 2017, 24(4): 395-402.
[12] YANG Wei-jie, MENG Wen-jun, WU Si-min, LIU Bao-lin, QI Xiang-dong. Simulation analysis and experimental verification of coal suction characteristics of the new railway tunnel fallen coal dust collection device[J]. Chinese Journal of Engineering Design, 2017, 24(2): 174-181.
[13] XIA Li， WU Peng， WU Da-zhuan. Effects of reflux hole of volute on the performance of self-priming pump[J]. Chinese Journal of Engineering Design, 2015, 22(3): 284-289.
[14] ZHU Gui-hua， MA Kai， TANG Xiao， GAO Ming-quan， ZHU Hong-bin. Numerical simulation of the liquid-solid two-phase flow mixture on sludge with shifted propeller[J]. Chinese Journal of Engineering Design, 2015, 22(1): 49-53.
[15] MA Shan，WANG Fa-zhan，WANG Bo，WANG Xin，WU Zhen，WANG Zhe. Numerical research of gas-liquid-solid three-phase in mechanically self-absorption air flotation machine[J]. Chinese Journal of Engineering Design, 2014, 21(1): 62-67.