机械设计理论与方法 |
|
|
|
|
3D打印混凝土流动度稳定控制策略设计 |
韩怡萱1( ),马宗方1,贺静1( ),宋琳1,刘超2,崔衡1 |
1.西安建筑科技大学 信息与控制工程学院,陕西 西安 710055 2.西安建筑科技大学 土木工程学院,陕西 西安 710055 |
|
Design of flow stability control strategy for 3D printed concrete |
Yixuan HAN1( ),Zongfang MA1,Jing HE1( ),Lin SONG1,Chao LIU2,Heng CUI1 |
1.College of Information and Control Engineering, Xi'an University of Architecture and Technology, Xi'an 710055, China 2.College of Civil Engineering, Xi'an University of Architecture and Technology, Xi'an 710055, China |
引用本文:
韩怡萱,马宗方,贺静,宋琳,刘超,崔衡. 3D打印混凝土流动度稳定控制策略设计[J]. 工程设计学报, 2025, 32(3): 308-315.
Yixuan HAN,Zongfang MA,Jing HE,Lin SONG,Chao LIU,Heng CUI. Design of flow stability control strategy for 3D printed concrete[J]. Chinese Journal of Engineering Design, 2025, 32(3): 308-315.
链接本文:
https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn.1006-754X.2025.04.182
或
https://www.zjujournals.com/gcsjxb/CN/Y2025/V32/I3/308
|
[1] |
肖建庄, 柏美岩, 唐宇翔, 等. 中国3D打印混凝土技术应用历程与趋势[J]. 建筑科学与工程学报, 2021, 38(5): 1-14. XIAO J Z, BAI M Y, TANG Y X, et al. Application and development of 3D printed concrete technology in China[J]. Journal of Architecture and Civil Engineering, 2021, 38(5): 1-14.
|
[2] |
李小龙, 王栋民. 建筑3D打印技术及材料的研究进展[J]. 中国建材科技, 2021, 30(3): 29-35. LI X L, WANG D M. Research progress in 3D printing construction technology and materials[J]. China Building Materials Science & Technology, 2021, 30(3): 29-35.
|
[3] |
滕丽平, 王迎春. 3D打印混凝土技术在异形建筑设计中的应用[J]. 安徽建筑, 2024, 31(10): 93-94, 103. TENG L P, WANG Y C. Application of 3D printed concrete technology in special-shaped building design[J]. Anhui Architecture, 2024, 31(10): 93-94, 103.
|
[4] |
ZHANG C, NERELLA V N, KRISHNA A, et al. Mix design concepts for 3D printable concrete: a review[J]. Cement and Concrete Composites, 2021, 122: 104155.
|
[5] |
JAYATHILAKAGE R, RAJEEV P, SANJAYAN J. Extrusion rheometer for 3D concrete printing[J]. Cement and Concrete Composites, 2021, 121: 104075.
|
[6] |
KAZEMIAN A, YUAN X, DAVTALAB O, et al. Computer vision for real-time extrusion quality monitoring and control in robotic construction[J]. Automation in Construction, 2019, 101: 92-98.
|
[7] |
SANJAYAN J G, JAYATHILAKAGE R, RAJEEV P. Vibration induced active rheology control for 3D concrete printing[J]. Cement and Concrete Research, 2021, 140: 106293.
|
[8] |
ROUSSEL N. Rheological requirements for printable concretes[J]. Cement and Concrete Research, 2018, 112: 76-85.
|
[9] |
TANG J N, KWAN T H, WU X F. Extrusion and thermal control design of an on-orbit 3D printing platform[J]. Advances in Space Research, 2022, 69(3): 1645-1661.
|
[10] |
TAO Y X, LESAGE K, VAN TITTELBOOM K, et al. Twin-pipe pumping strategy for stiffening control of 3D printable concrete: from transportation to fabrication[J]. Cement and Concrete Research, 2023, 168: 107137.
|
[11] |
ZHANG W, DENG X W, CAI J. Intelligent automatic 3D printing machine based on wireless network communication[J]. Wireless Communications and Mobile Computing, 2021, 2021(1): 1778281.
|
[12] |
LU B, LI M Y, WONG T N, et al. Effect of printing parameters on material distribution in spray-based 3D concrete printing (S-3DCP)[J]. Automation in Construction, 2021, 124: 103570.
|
[13] |
ZHANG N, SANJAYAN J. Extrusion nozzle design and print parameter selections for 3D concrete printing[J]. Cement and Concrete Composites, 2023, 137: 104939.
|
[14] |
金鑫, 谭文, 李志军, 等. 典型工业过程鲁棒PID控制器的整定[J]. 控制理论与应用, 2005, 22(6): 947-953. JIN X, TAN W, LI Z J, et al. Tuning of robust PID controllers for typical industrial processes[J]. Control Theory & Applications, 2005, 22(6): 947-953.
|
[15] |
杨旭红, 陈阳, 方剑峰, 等. 基于改进PSO-PID控制器的核电站汽轮机转速控制[J]. 控制工程, 2022, 29(12): 2177-2183. YANG X H, CHEN Y, FANG J F, et al. Turbine speed control in nuclear power plant based on improved PSO-PID controller[J]. Control Engineering of China, 2022, 29(12): 2177-2183.
|
[16] |
KASHYAP A K, PARHI D R. Particle swarm optimization aided PID gait controller design for a humanoid robot[J]. ISA Transactions, 2021, 114: 306-330.
|
[17] |
杨晓, 王国柱. 基于PID控制理论的改进粒子群优化算法[J]. 控制工程, 2019, 26(8): 1497-1502. YANG X, WANG G Z. The improved particle swarm optimization algorithm based on PID control theory[J]. Control Engineering of China, 2019, 26(8): 1497-1502.
|
[18] |
崔衡, 马宗方, 宋琳, 等. 基于连续顶点分区的混凝土3D打印路径规划算法[J]. 工程设计学报, 2024, 31(3): 271-279. CUI H, MA Z F, SONG L, et al. Path planning algorithm for concrete 3D printing based on continuous vertex partitioning[J]. Chinese Journal of Engineering Design, 2024, 31(3): 271-279.
|
[19] |
刘丽丽, 左继红. 磁悬浮球系统模糊PID参数自调整控制方法[J]. 控制工程, 2021, 28(2): 354-359. LIU L L, ZUO J H. Parameter self-adjusting control method of fuzzy PID for magnetic levitation ball system[J]. Control Engineering of China, 2021, 28(2): 354-359.
|
[20] |
周婧, 高红飞, 卢林, 等. 变论域模糊PID控制微流挤出型3D打印机的挤压力研究[J]. 工程设计学报, 2022, 29(5): 572-578. doi:10.3785/j.issn.1006-754X.2022.00.075 ZHOU J, GAO H F, LU L, et al. Research on extrusion force of micro-flow extrusion 3D printer controlled by variable universe fuzzy PID[J]. Chinese Journal of Engineering Design, 2022, 29(5): 572-578.
doi: 10.3785/j.issn.1006-754X.2022.00.075
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|