保质设计 |
|
|
|
|
精密机床直线进给系统误差均化机理研究 |
孙光明1,2( ),张大卫1,孙铭泽3,徐鹏飞1,陈发泽1,李志军4 |
1.天津大学 机构理论与装备设计教育部重点实验室,天津 300072 2.天津城建大学 控制与机械工程学院,天津 300384 3.天津理工大学 机械工程学院,天津 300082 4.天津大学 内燃机燃烧学国家重点实验室,天津 300072 |
|
Research on error averaging mechanism of linear feed system for precision machine tools |
Guangming SUN1,2( ),Dawei ZHANG1,Mingze SUN3,Pengfei XU1,Faze CHEN1,Zhijun LI4 |
1.Key Laboratory of Mechanism Theory and Equipment Design of Ministry of Education, Tianjin University, Tianjin 300072, China 2.School of Control and Mechanical Engineering, Tianjin Chengjian University, Tianjin 300384, China 3.School of Mechanical Engineering, Tianjin University of Technology, Tianjin 300082, China 4.State Key Laboratory of Engines, Tianjin University, Tianjin 300072, China |
引用本文:
孙光明,张大卫,孙铭泽,徐鹏飞,陈发泽,李志军. 精密机床直线进给系统误差均化机理研究[J]. 工程设计学报, 2023, 30(2): 200-211.
Guangming SUN,Dawei ZHANG,Mingze SUN,Pengfei XU,Faze CHEN,Zhijun LI. Research on error averaging mechanism of linear feed system for precision machine tools[J]. Chinese Journal of Engineering Design, 2023, 30(2): 200-211.
链接本文:
https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn.1006-754X.2023.00.023
或
https://www.zjujournals.com/gcsjxb/CN/Y2023/V30/I2/200
|
1 |
LIU Y, CHEN M S, SUN Y W. Global toolpath modulation-based contour error pre-compensation for multi-axis CNC machining[J]. The International Journal of Advanced Manufacturing Technology, 2023, 125(7/8): 3171-3189.
|
2 |
WU S, WANG Y, LIU X, et al. Separating machining errors of S-shaped samples based on the comprehensive error field of five-axis machine tools[J]. Journal of Mechanical Science and Technology, 2022, 37(1): 305-316.
|
3 |
刘阔,韩伟,王永青,等.数控机床进给轴热误差补偿技术研究综述[J].机械工程学报,2021,57(3):156-173. doi:10.3901/jme.2021.03.156 LIU K, HAN W, WANG Y Q, et al. Review on thermal error compensation for feed axes of CNC machine tools[J]. Journal of Mechanical Engineering, 2021, 57(3): 156-173.
doi: 10.3901/jme.2021.03.156
|
4 |
孙光明,王奕苗,万仟,等.考虑装配变形的精密机床床身优化设计[J].工程设计学报,2022,29(3):318-326. doi:10.3785/j.issn.1006-754X.2022.00.035 SUN G M, WANG Y M, WAN Q, et al. Optimization design of precision machine tool bed considering assembly deformation[J]. Chinese Journal of Engineering Design, 2022, 29(3): 318-326.
doi: 10.3785/j.issn.1006-754X.2022.00.035
|
5 |
周微,朱若岭,张昊.数控机床进给系统运动精度与能耗控制研究[J].机电工程,2021,38(11):1387-1394. doi:10.3969/j.issn.1001-4551.2021.11.003 ZHOU W, ZHU R L, ZHANG H. Motion precision and energy consumption control for feed system of CNC machine tools[J]. Journal of Mechanical & Electrical Engineering, 2021, 38(11): 1387-1394.
doi: 10.3969/j.issn.1001-4551.2021.11.003
|
6 |
PARK C H, CHUNG J H, LEE H, et al. Finite element analysis on the motion accuracy of hydrostatic table (1st. Analysis and experimental verification on single-side table) [J]. Journal of the Korean Society of Precision Engineering, 2000, 17(12): 137-144.
|
7 |
PARK C H, LEE H, KIM T H, et al. Finite element analysis on the motion accuracy of hydrostatic table (2nd. Analysis and experimental verification on double-side table) [J]. Journal of the Korean Society of Precision Engineering, 2002, 19(1): 65-70.
|
8 |
SHAMOTO E, PARK C H, MORIWAKI T. Analysis and improvement of motion accuracy of hydrostatic feed table [J]. CIRP Annals-Manufacturing Technology, 2001, 50(1): 285-290.
|
9 |
PARK C H, OH Y J, LEE C H, et al. Theoretical verification on the motion error analysis method of hydrostatic bearing tables using a transfer function[J]. International Journal of Precision Engineering and Manufacturing, 2003, 4(2): 64-70.
|
10 |
EKINCI T O, MAYER J R R. Relationships between straightness and angular kinematic errors in machines[J]. International Journal of Machine Tools and Manufacture, 2007, 47(12/13): 1997-2004.
|
11 |
EKINCI T O, MAYER J R R, CLOUTIER G M. Investigation of accuracy of aerostatic guideways[J]. International Journal of Machine Tools and Manufacture, 2009, 49(6): 478-487.
|
12 |
KHIM G, PARK C H, SHAMOTO E, et al. Prediction and compensation of motion accuracy in a linear motion bearing table[J]. Precision Engineering, 2011, 35(3): 393-399.
|
13 |
薛飞,赵万华.静压导轨误差均化效应影响因素研究[J]. 西安交通大学学报,2010,44(11):33-36. doi:10.7652/xjtuxb201011007 XUE F, ZHAO W H. Influencing factors on error averaging effect of hydrostatic guideway[J]. Journal of Xi’an Jiaotong University, 2010, 44(11): 33-36.
doi: 10.7652/xjtuxb201011007
|
14 |
XUE F, ZHAO W H, CHEN Y L, et al. Research on error averaging effect of hydrostatic guideways[J]. International Journal of Precision Engineering and Manufacturing, 2012, 36(1): 84-90.
|
15 |
QI E, FANG Z, SUN T, et al. A method for predicting hydrostatic guide error averaging effects based on three-dimensional profile error[J]. Tribology International, 2016, 95: 279-289.
|
16 |
ZHA J, CHEN Y, WANG Z. A tolerance design method for hydrostatic guideways motion accuracy based on error averaging effect[J]. Procedia Cirp, 2018, 75: 196-201.
|
17 |
刘锡尧,赵晓龙,刘波,等.高精度平面气浮导轨的误差均化效应研究[J].润滑与密封,2016,41(6):49-53. doi:10.3969/j.issn.0254-0150.2016.06.011 LIU X Y, ZHAO X L, LIU B, et al. Research on error averaging effect of high accuracy plane gas floating guide[J]. Lubrication Engineering, 2016, 41(6): 49-53.
doi: 10.3969/j.issn.0254-0150.2016.06.011
|
18 |
ZHAO X, DONG H, ZHANG J. Study on error averaging effects of aerostatic bearing considering rough surface profile[J]. IOP Conference Series: Materials Science and Engineering, 2018, 382(4): 042054.
|
19 |
HE G Y, SUN G M, ZHANG H S, et al. Hierarchical error model to estimate motion error of linear motion bearing table[J]. The International Journal of Advanced Manufacturing Technology, 2017, 93(5/8): 1915-1927.
|
20 |
NI Y B, ZHOU H Y, SHAO C Y, et al. Research on the error averaging effect in a rolling guide pair[J]. Chinese Journal of Mechanical Engineering, 2019, 32(1): 72.
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|