Please wait a minute...
工程设计学报  2015, Vol. 22 Issue (1): 49-53    DOI: 10.3785/j.issn. 1006-754X.2015.01.008
建模、分析、优化和决策     
错位桨对污泥固液两相流混合的数值模拟
朱桂华,马凯,唐啸,高明泉,朱宏斌
中南大学 机电工程学院,湖南 长沙 410083
Numerical simulation of the liquid-solid two-phase flow mixture on sludge with shifted propeller
ZHU Gui-hua, MA Kai, TANG Xiao, GAO Ming-quan, ZHU Hong-bin
School of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China
 全文: PDF(1673 KB)   HTML
摘要: 为了提高搅拌器的搅动范围、减小流动死区,基于混合理论和等螺距的设计原理,提出了一种错位叶片的结构形式.采用Fluent软件对错位桨搅拌器(6SBP)和普通6BP搅拌器在污泥液体中的流场变化进行了三维数值模拟,模拟分析比较了6SBP桨和6BP桨式两种搅拌器的流场形态、速度分布和功耗的特点,并通过实验进行了验证.结果表明,模拟结果和实验结果较吻合,错位桨搅拌流场不对称,能够减小流动死区,增大搅动范围.在N=3 r/s的工作状态下,6SBP桨的轴向速度和径向速度分布要大于6BP桨,而功耗约为6BP桨的77%. 
关键词: 错位桨数值模拟速度场速度分布流动死区湍流模型    
Abstract: In order to expand the stirring region and destroy the mixed isolation region in the stirrer, a novel shifted propeller was carried out based on the mixing theory and the design principle of pitch. Computational fluent software was applied to the study of 3D flow field driven by stirrers composed of shifted six blade propeller (6SBP) and ordinary 6BP respectively in sludge. The flow pattern, velocity distribution and power consumption in stirred tank with two different propellers were extensively analyzed and compared by simulation which were verified by experimental test. The results showed that the values of numerical simulation and the experimental measurement of power consumption were in good agreement, and isolation region was destroyed and the stirring region was enlarged by the asymmetric structure in flow field of 6SBP propeller. The radial and axial velocity distributions of 6SBP were clearly superior to those of 6BP at agitation speed of 3 r/s, while its power consumption was about 77% of that of 6BP agitation.
Key words: shifted propeller    numerical simulation    velocity field    velocity distribution    flow dead region    turbulence model
收稿日期: 2014-07-22 出版日期: 2015-02-28
基金资助: 湖南省科技计划重点资助项目(2014SK2020).
作者简介: 朱桂华(1962—),男,湖南娄底人,副教授,博士生,从事机电一体化及环保设备研究,E-mail:857546474@qq.com.
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

朱桂华,马凯,唐啸,高明泉,朱宏斌. 错位桨对污泥固液两相流混合的数值模拟[J]. 工程设计学报, 2015, 22(1): 49-53.

ZHU Gui-hua, MA Kai, TANG Xiao, GAO Ming-quan, ZHU Hong-bin. Numerical simulation of the liquid-solid two-phase flow mixture on sludge with shifted propeller. Chinese Journal of Engineering Design, 2015, 22(1): 49-53.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn. 1006-754X.2015.01.008        https://www.zjujournals.com/gcsjxb/CN/Y2015/V22/I1/49

[1] 熊伟, 葛志华, 庞乔, 李曼迪, 王友. 轮毂轴承单元过盈量理论设计及试验研究[J]. 工程设计学报, 2021, 28(1): 41-47.
[2] 章亦聪, 朱玮, 吴玉国, 时礼平. 莱洛三角形微孔织构化端面密封性能数值模拟[J]. 工程设计学报, 2020, 27(1): 103-110.
[3] 侯勇俊, 李芬, 吴先进, 刘有平. 负压钻井液振动筛气液喷射器性能的数值模拟研究[J]. 工程设计学报, 2019, 26(4): 423-432.
[4] 张晓东, 陈龙. 基于冲蚀磨损理论的新型内防喷器阀座锥角研究[J]. 工程设计学报, 2019, 26(3): 287-298.
[5] 钟功祥, 邹迪, 张兴. 基于CFD与ADAMS的三角转子气动机设计与仿真[J]. 工程设计学报, 2019, 26(3): 305-314.
[6] 王志敏, 武美萍, 魏晶晶. 磨料水射流对脆性材料的冲蚀研究[J]. 工程设计学报, 2019, 26(1): 79-86.
[7] 李舜酩, 王一博, 顾信忠. 基于流场分析的某割草车节能优化设计[J]. 工程设计学报, 2018, 25(6): 683-689.
[8] 张园, 彭振华, 高定祥, 任海涛, 唐一鑫. 芯管式稠油掺稀混合器设计及其掺混性能研究[J]. 工程设计学报, 2018, 25(5): 510-517.
[9] 邓嵘, 侯凯, 李孟华, 李向东. 混合式单牙轮钻头破岩性能研究[J]. 工程设计学报, 2018, 25(3): 262-269.
[10] 张露, 武鹏, 吴大转, 洪伟荣. 燃油系统旋涡泵压力脉动的控制研究[J]. 工程设计学报, 2017, 24(4): 395-402.
[11] 杨伟杰, 孟文俊, 邬思敏, 刘宝林, 齐向东. 新型铁路隧道落煤吸尘装置吸煤特性仿真分析与试验验证[J]. 工程设计学报, 2017, 24(2): 174-181.
[12] 夏 丽,武 鹏,吴大转. 蜗壳回流孔对自吸泵性能的影响[J]. 工程设计学报, 2015, 22(3): 284-289.
[13] 马姗,王发展,王博,王欣,吴振,王哲. 机械搅拌自吸式浮选机气-液-固三相流场的数值研究[J]. 工程设计学报, 2014, 21(1): 62-67.
[14] 刘斌, 吴雪, 王晶, 冯涛. 不同结构均质阀内流场的数值模拟与对比研究[J]. 工程设计学报, 2011, 18(3): 191-196.
[15] 林思达, 吴大转, 王乐勤. 卫生型离心泵水力性能的参数化研究[J]. 工程设计学报, 2010, 17(1): 51-54.