Please wait a minute...
浙江大学学报(工学版)
JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE)  2017, Vol. 51 Issue (10): 1928-1936    DOI: 10.3785/j.issn.1008-973X.2017.10.006
Mechanical and Energy Engineering     
Theoretical calculation and analysis on friction torque in RV reducer main bearing
YU Dong, ZHANG Jin-hua, WANG Dong-feng, LI Xiao-hu, HONG Jun
State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an 710049, China
Download:   PDF(1932KB) HTML
Export: BibTeX | EndNote (RIS)      

Abstract  

A theoretical method to calculate the friction torque of the RV reducer main bearing was presented aiming at the problem that the RV reducer precision running requires low friction torque. The more accurate location of the pure rolling lines in the contact and friction torque calculation formula was derived based on the works of Luc Houpert and the quasi static analysis which adopted the D' Alembert principle. The properties of friction torque of H76/182 RV reducer main bearing were analyzed. Results showed that the total friction torque of bearing increased with a larger difference between inner and outer groove curvature coefficient. The increase of the curvature coefficient will lead to the decrease of the total friction torque. Change rules of friction torques of the different groove curvature coefficient were qualitatively analyzed. The friction torque calculation model was verified by experiments. The experimental results were compared with the SKF empirical formula and the Luc Houpert calculation method. The proposed friction torque calculation formula was more accurate and closer to the experimental results than the other two calculation formula.

Received: 22 February 2017      Published: 27 September 2017
CLC:  TH133  
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
Cite this article:

YU Dong, ZHANG Jin-hua, WANG Dong-feng, LI Xiao-hu, HONG Jun. Theoretical calculation and analysis on friction torque in RV reducer main bearing. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2017, 51(10): 1928-1936.

URL:

http://www.zjujournals.com/eng/10.3785/j.issn.1008-973X.2017.10.006     OR     http://www.zjujournals.com/eng/Y2017/V51/I10/1928


RV减速器主轴承摩擦力矩理论计算及特性分析

针对RV减速器的精密运转工况而要求低摩擦力矩的问题，在Luc Houpert工作的基础上，通过基于达朗贝尔原理的拟静力学模型，重新推导了更准确的轴承接触椭圆内纯滚动线位置与摩擦力矩的求解方程，给出更准确的基于纯滚动线位置的摩擦力矩计算公式.对型号为H76/182的RV减速器主轴承的摩擦力矩的特性进行理论计算分析.从结论可知，轴承的总摩擦力矩随着内、外沟曲率系数的差值的增大而增大，沟曲率系数的增大会导致轴承总摩擦力矩的减小.对不同沟曲率系数下摩擦力矩的变化进行定性分析.对得到的RV减速器主轴承的摩擦力矩计算结果与采用SKF、Luc Houpert方法得到的结果进行比较与实验验证.结果显示，提出的摩擦力矩计算公式更加接近摩擦力矩试验机的测量结果，计算结果更精确.

[1] PALMGREN A. Ball and roller bearing engineering[M]. Philadelphia:SKF Industries Inc, 1959.
[2] SNARE B. Rolling resistance in loaded ball bearings[J]. BallBearing Journal, 1968, 155:12-21.
[3] TODD M J, STEVENS K T. Frictional torque of angular contact ball bearings with different conformities[R]. Risley:Technical Report ESA-CR(P)-1221, 1978.
[4] HOUPERT L. Numerical and analytical calculations in ball bearings[J]. European Space Agency, 1999, 438:283-290.
[5] HOUPERT L. Ball bearing and tapered roller bearing torque:analytical, numerical and experimental results[J]. Tribology Transactions, 2002, 45(3):345-353.
[6] HOUPERT L. Rolling bearing torque[M]. Boston:Springer, 2013.
[7] HARRIS T A, KOTZALAS M N. Essential concepts of bearing technology[M]. New York:Taylor & Francis, 2006.
[8] GONCALVES D, PINHO S, GRA A B, et al. Friction torque in thrust ball bearings lubricated with polymer greases of different thickener content[J]. Tribology International, 2016, 96:87-96.
[9] DENG S. Frictional torque characteristic of angular contact ball bearings[J]. Journal of Mechanical Engineering, 2011, 47(05):114-120.
[10] 陈剑,李松生,陈斌,等.超高转速电主轴轴承内部摩擦力矩分析[J].润滑与密封,2012,37(9):61-65. CHEN Jian,LI Song-sheng, CHEN Bin, et al. Analysis on friction torque in ultra high-speed electric spindle bearing[J]. Lubrication Engineering, 2012, 37(9):61-65.
[11] 陶润,侯之超.受径向力滚动轴承摩擦力矩的测试和函数拟合[J].清华大学学报:自然科学版,2014, 54(6):744-749. TAO Run,HOU Zhi-chao. Measurement and curve fitting of the friction torque of rolling bearings subjected to radial loads[J]. Journal of Tsinghua University:Science and Technology, 2014, 54(6):744-749.
[12] 姜绍娜,陈晓阳,顾家铭,等.低速灵敏球轴承摩擦力矩分析[J].中国机械工程,2010, 21(5):510-514. JIANG Shao-na,CHEN Xiao-yang, GU Jia-ming, et al. Analysis of friction torque of sensitive ball bearing under low speed[J]. China Mechanical Engineering, 2010, 21(5):510-514.
[13] 姜绍娜,陈晓阳,顾家铭,等.陀螺框架轴承摩擦力矩分析[J].机械工程学报,2016,52(7):60-68. JIANG Shao-na, CHEN Xiao-yang, GU Jia-ming, et al. Analysis of friction moment of gyroscope frame bearing[J]. Journal of Mechanical Engineering, 2016, 52(7):60-68.
[14] 丁长安,周章福,朱均,等.滚道控制理论与滚动体姿态角的确定[J].机械工程学报,2001,37(2):58-65. DING Chang-an, ZHOU Zhang-fu, ZHU Jun, et al. Raceway control assumption and the determination of rolling element attitude angle[J]. Journal of Mechanical Engineering, 2001, 37(2):58-65.
[15] SKF(中国)有限公司.SKF轴承综合型录[G].上海:上海科学技术文献出版社,2008.
[16] 邓四二,贾群义.滚动轴承设计原理[M].北京:中国标准出版社,2014.
[17] 金津将幸,太田浩之.ポリマ潤滑剤を封入した玉軸受の回転トルク:回転トルクの計算式(機械要素,潤滑,工作,生産管理など)[J].日本機械学會論文集:C編,2005,71(701):272-279. MASAYUKI K, HIROYUKI O. Running torque of ball bearings with polymer lubricant[J]. Transactions of the Japan Society of Mechanical Engineers:Series C, 2005, 71(701):272-279.
[18] GUPTA S, TIWARI R, NAIR S B. Multi-objective design optimisation of rolling bearings using genetic algorithms[J]. Mechanism and Machine Theory, 2007, 42(10):1418-1443.
[19] SAVSANI V. Multi-objective design optimization of rolling element bearings using abc, aia and pso technique[J]. International Journal of Energy Optimization and Engineering, 2013, 2(3):102-125.
[20] 陈锦江.轴承数字化设计及其在高速陶瓷球轴承结构设计中的应用[D].天津:天津大学,2004. CHEN Jin-jiang. Digital design of bearings and its application of high-speed ceramic ball bearings in the structural parameter design[D]. Tianjin:Tianjin University, 2004.
[1] ZHONG Yun-long, WU Li-jian, HUANG Xiao-yan, FANG You-tong. Nonlinear analytical model of heteropolar radial magnetic bearing[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2019, 53(1): 193-199.