Please wait a minute...
浙江大学学报(工学版)
J4  2013, Vol. 47 Issue (10): 1712-1721    DOI: 10.3785/j.issn.1008-973X.2013.10.003
    
Development of multi-speed electronic let-off system for warp knitting machine based on FI-SNAPID algorithm
REN Wen1,2, XU Bu-gong1
1.College of Automation Science and Engineering, South China University of Technology, Guangzhou 510641, China; 2. College of Physics and Mechanical and Electrical Engineering, Sanming University, Sanming 365004, China
Download:   PDF(0KB) HTML
Export: BibTeX | EndNote (RIS)      

Abstract  

Multi-speed electronic let-off system, as the upgrading of the aging single-speed system, was developed for Karl Mayer double needle bar warp knitting machine in order to improve the quality of warp-knitted fabric and increase product variety. The implementation methods of system architecture, hardware circuit and fuzzy immune-single neuron PID(FI-SNAPID) algorithm were proposed based on the detailed research of multi-speed electronic let-off. The host computer which can realize such functions as product design, process parameter settings, production management, etc is consisted of an embedded computer/touch screen installing the MCGS configuration software. In the process of upgrading, a large number of reconstruction funds were resolved because of utilizing 6 warp beam DC motors of original system. The DC servo drivers developed for 6 warp beam DC motors are as the lower computer. The lower computers which consist of high-performance 8 bit microcontroller and intelligent power module (IPM) perform the FI-SNAPID algorithm. Practical testing operation shows that the system has good stability, high precision and friendly interface.

Published: 01 October 2013
CLC:  TP 273  
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
Cite this article:

REN Wen, XU Bu-gong. Development of multi-speed electronic let-off system for warp knitting machine based on FI-SNAPID algorithm. J4, 2013, 47(10): 1712-1721.

URL:

http://www.zjujournals.com/eng/10.3785/j.issn.1008-973X.2013.10.003     OR     http://www.zjujournals.com/eng/Y2013/V47/I10/1712


基于FI-SNAPID算法的经编机多速电子送经系统开发

为了提高经编针织物的质量和增加可生产的花型品种,对德国卡尔迈耶双针床经编机原已老化的单速电子送经系统进行升级改造,开发了多速电子送经系统.在研究多速电子送经原理的基础上,给出系统架构、硬件电路和基于模糊免疫-单神经元PID（FI-SNAPID）算法的软件实现方法.系统上位机采用嵌入式工控机/触摸屏,搭载MCGS组态软件,方便、直观地实现了产品设计、工艺参数的设置以及生产管理等功能.为了节约改造资金,提高性价比,在升级改造过程中保留了原系统6个经轴直流电机,重新为其开发伺服驱动器作为下位机.下位机主要基于高性能8位微处理器、智能功率模块（IPM）和FI-SNAPID算法设计实现.经实际测试运行表明,系统性能稳定,送经精度高,人机界面友好.

［1］ MAYER K.EBA 2-step documentation (Version3.0) ［J］. Karl Mayer Textilmaschinen fabric GmbH,2000(5): 31-32.

［2］ 梁海顺,胡巧娥,张阿维,等.模糊电子送经装置的研究［J］.西安工程科技学院学报,2006,20(1): 24-30.

LIANG Hai-shun,HU Qiao-e,ZHANG A-wei,et al.Research on fuzzy electronic let-off device ［J］.Journal of Xi’an University of Engineering Science and Technology,2006,20(1)： 24-30.

［3］ 刘官正,张森林.基于RBF神经网络整定的经纱张力PID控制系统［J］.纺织学报,2008,29(12)：9699,107.

LIU Guan-zheng,ZHANG Sen-lin.Adaptive PID control for warp tension system based on RBF neural network ［J］.Journal of Textile Research,2008,29(12)： 9699,107.

［4］ 甄力,刘向阳,周安旦,等.织机电子卷取和送经控制系统:中国,200820158264. X ［P］.20091223.

ZHEN Li,LIU Xiang-yang,ZHOU An-dan, et al.Electronic let-off and take-up control system: CN,200820158264. X ［P］.20091223.

［5］ 张爱明.电子卷取电子送经系统,中国：200510136884.4［P］.20070411.

ZHANG Ai-ming.System of electronic let-off and electronic take-up: CN,200510136884.4 ［P］.20070411.

［6］ 蒋高明,顾璐英.国内外经编技术最新进展［J］.针织技术,2010（1）: 13.

JIANG Gao-ming,GU Lu-ying.The latest progress of the warp knitting technology at home and abroad ［J］.Knitting Technology,2010（1）: 13.

［7］ 王文进,蒋高明.经编多速电子送经系统控制过程与控制算法［J］.纺织学报,2007,28(9)： 110-113.

WANG Wen-jin,JIANG Gao-ming.Control process and algorithm on warp knitting multi-speed electronic let-off system ［J］.Journal of Textile Research,2007,28(9)： 110113.

［8］ 田宁波,袁嫣红,张建义,等.高速经编机电子送经控制系统的设计［J］.机电工程,2011,28(2)：188-190,194.

TIAN Ning-bo,YUAN Yan-hong,ZHANG Jian-yi, et al. Design of electronic let-off control system of high-peed warp knitting machine ［J］.Journal of Mechanical and Electrical Engineering,2011,28(2)： 188190,194.

［9］ 杨建成,蒋秀明,周国庆,等.Fuzzy-PID复合控制在电子送经中的应用［J］.纺织学报,2008,29(4)： 115-118.

YANG Jian-cheng,JIANG Xiu-ming,ZHOU Guo-qing, et al. Application of Fuzzy-PID compound control on loom electronic let-off and take-up ［J］.Journal of Textile Research,2008,29(4)： 115-118.

［10］ 应腾云,张森林.基于模糊-PI并联控制的经纱张力控制系统［J］.纺织学报,2010,31(9)：122-127.

YING Teng-yun,ZHANG Sen-lin.Warp tension control system based on fuzzy-PI parallel control ［J］.Journal of Textile Research, 2010,31(9)： 122-127.

［11］ GANG L, GIRIJESH P,THOMAS M M. An on-line algorithm for creating self-organizing fuzzy neural networks ［J］. Neural Networks, 2004, 17(10)： 1477-1493.

［12］ LIN Cheng-jian, XU Yong-ji. Design of neuro-fuzzy systems using a hybrid evolutionary learning algorithm ［J］. Journal of Information Science and Engineering, 2007, 23: 463-477.

［13］ JUANG Chia-feng, LIN Chin-teng.An on-line self-constructing neural fuzzy inference network and its applications ［J］. IEEE Transactions on Fuzzy Systems, 1998,6(1)： 12-32.

［14］ FIGUEIREDO M,GOMIDE F.Design of fuzzy systems using neuro-fuzzy networks ［J］.IEEE Transactions on Neural Networks,1999,10(4)： 815-827.

［15］ WANG Xing-gui,XU Bing,DING Lei. Simulation study on s single neuron PID control system of DC/DC converters ［C］∥ 2008 Workshop on Power Electronics and Intelligent Transportation System.Guangzhou: IEEE,2008: 127-130.

［16］ 王文进,蒋高明.EBC经编电子送经系统［J］.针织工业, 2007,6: 16-19.

WANG Wen-jin,JIANG Gao-ming.EBC warp knitting electronic let-off system ［J］.Knitting Industries,2007,6: 16-19.

［17］ WANG Bo,SUN Yu-shan,CAO Jian,et al. Control and simulation of an underwater robot using single neuron PID control based on immune feedback mechanism ［C］∥ Proceedings of the 8th World Congress on Intelligent Control and Automation. Jinan: AMSS, 2010: 6-9.

［18］ TAKAHASHI K,YAMADA T. Application of an immune feedback mechanism to control systems ［J］. JSME International Journal. Series C,1998,41(2)： 184-191.

［19］ REN Xin-yi, DU Feng-shan, HUANG Hua-gui, et al. Application of improved fuzzy immune PID controller to bending control system ［J］.Journal of Iron And Steel Research, International, 2011, 18(3)： 2833.

［20］ ROMAGNANI S. The TH1/TH2 paradigm ［J］. Immunology Today, 1997,18(6)： 263–266.

［21］ PARRIS K. TH1/TH2 balance: the hypothesis, its limitations,and implications for health and disease ［J］. Alternative Medicine Review, 2003, 8(3)：  223246.

［22］ YANG Ruo-ting, BEWICK S, ZHANG Ming-jun, et al. Adaptive immune system TH1/TH2 differentiation mechanism inspired perimeter patrol control strategy ［J］. IEEE Transactions on Control Systems Technology, 2011, 19(2): 407-415.

［23］ 孙禹,蒋高明,丛洪莲.经编机停车横条成因及消除方法研究［J］.上海纺织科技,2006,34(11)： 70-72.

SUN Yu, JIANG Gao-ming, CONG Hong-lian. The analysis of the forming causes of the warp knitting machine’s stop marks and the solution ［J］. Shanghai Textile Science and Technology,2006,34(11)： 70-72.

［24］ 张烈平,牛秦洲,敖茂尧.基于OPC的MATLAB与MCGS实时通讯的实现［J］.微计算机信息（测控自动化）,2007,23(21)： 5455,3-6.

ZHANG Lie-ping, NIU Qin-zhou, AO Mao-yao. Implementation of real-time communication between MATLAB and MCGS based on OPC ［J］. Microcomputer Information (Automatic Measurement and Control), 2007,23(2-1)： 5455,3-6.
[1] CHENG Sen-lin, LI Lei, ZHU Bao-wei, CHAI Yi. Computing method of RSSI probability centroid for location in WSN[J]. J4, 2014, 48(1): 100-104.
[2] FANG Qiang, CHEN Li-peng, FEI Shao-hua, LIANG Qing-xiao, LI Wei-ping. Model reference adaptive control system design of localizer[J]. J4, 2013, 47(12): 2234-2242.
[3] LUO Ji-Liang, WANG Fei,SHAO Hui,ZHAO Liang-Xu. Optimal Petri-net supervisor synthesis based on the constraint transformation[J]. J4, 2013, 47(11): 2051-2056.
[4] LI Qi-an, JIN Xin. Approximate decoupling multivariable generalized predictive control of diagonal CARIMA model[J]. J4, 2013, 47(10): 1764-1769.
[5] MENG De-yuan, TAO Guo-liang, QIAN Peng-fei, BAN Wei. Adaptive robust control of pneumatic force servo system[J]. J4, 2013, 47(9): 1611-1619.
[6] YE Ling-yun,CHEN Bo,ZHANG Jian,SONG Kai-chen. Feedback control of high precision dynamic standard source  based on ripple-free deadbeat algorithm[J]. J4, 2013, 47(9): 1554-1558.
[7] YE Ling-jian, MA Xiu-shui. Optimal control strategy for chemical processes
based on soft-sensoring technique[J]. J4, 2013, 47(7): 1253-1257.
[8] HUANG Xiao-shuo,HE Yan,JIANG Jing-ping. Internet based control strategy for brushless DC motor drive systems    [J]. J4, 2013, 47(5): 831-836.
[9] HE Nai-bao, GAO Qian, XU Qi-hua, JIANG Chang-sheng. Anti-interference control of NSV based on adaptive observer[J]. J4, 2013, 47(4): 650-655.
[10] ZHU Yu-chen, FENG Dong-qin, CHU Jian. EPA based communication scheduling algorithm and
control scheme for block stream[J]. J4, 2012, 46(11): 2097-2102.
[11] LIU Zhi-peng, YAN Wen-jun. Intelligent modeling and compound control of pre-grinding system[J]. J4, 2012, 46(8): 1506-1511.
[12] ZHU Kang-wu, GU Lin-yi, MA Xin-jun, XU Ben-tao. Studies on multivariable robust output feedback control for
underwater vehicles[J]. J4, 2012, 46(8): 1397-1406.
[13] FEI Shao-hua,FANG Qiang,MENG Xiang-lei,KE Ying-lin. Countersink depth control of robot drilling based on pressure
foot displacement compensation[J]. J4, 2012, 46(7): 1157-1161.
[14] YU Xiao-ming, JIANG Jing-ping. Adaptive networked control system based on delay prediction
using neural network[J]. J4, 2012, 46(2): 194-198.
[15] ZOU Tao, LI Hai-qiang. Two-layer predictive control of multi-variable system
with integrating element[J]. J4, 2011, 45(12): 2079-2087.