|
|
|
| Rapid modeling method for combinatorial jib of portal crane |
| TONG Shui-guang1, GE Jun-xu2, WU Yan-ling2, YAN Zheng-hong2, ZHAO Qiong2, DING Fang-ming3, SHANG Wei-jun3, LI Chun-mu3 |
(1. College of Mechanical and Energy Engineering, Zhejiang University, Hangzhou 310027, China;
2. College of Materials Science and Chemical Engineering, Zhejiang University, Hangzhou 310027, China;
3. Shanghai Port Machinery Co. Ltd, Shanghai 200125, China) |
|
|
|
Abstract Based on the structure analysis method of space motion mechanism, this work proposed a rapid modeling method without computer aided engineering (CAE) preprocessor for the motion-changing process of four-bar linkage mechanism of combinatorial jib in portal crane. The study focused on the finite element model of four-bar linkage mechanism of combinatorial jib. The manual modeling process was simulated on a general CAE platform with model parameters extracted from the geometric model of this structure. Then the parametric multiple modeling of four-bar linkage mechanism which was on correspondent changing location during its whole changing process was completed. With the NX Nastran solver, the practical application of 12-40.5/25 t four-bar linkage of a certain portal crane was successfully done, proving the feasibility of the rapid modeling system. Compared with the analysis systems implemented by other modeling methods, the independent rapid modeling system has higher working efficiency and better model quality．
|
|
Published: 01 November 2009
|
|
|
门座起重机组合臂架结构的快速建模方法
针对门座起重机组合臂架四连杆结构变幅运动过程,基于空间运动机构的结构分析方法,提出一种脱离计算机辅助工程（CAE）前处理器的快速建模方法.重点研究组合臂架的四连杆结构有限元模型,通过从该结构几何模型中抽取模型参数,模拟在通用CAE平台上的手工建模流程,完成该结构在变幅运动过程中各幅度位置的参数化多模型建模.基于通用求解器NX Nastran,完成12-40.5/25 t某型号门座起重机的四连杆臂架结构的实例应用,验证了快速建模方法的可行性.与应用其他建模方法的系统相比,独立的快速建模系统具有建模效率高、模型质量好的优点.
|
|
| [1] 陆国贤,倪庆兴,张荣康,等.门座起重机设计[M].北京：人民交通出版社,1985：21-227．
[2] 李明星.基于遗传算法的门座起重机变幅系统优化设计[D].武汉：武汉理工大学,2006: 18-30．
LI Ming-xing.Optimization design for portal crane Luffing system based on genetic algorithms [D].Wuhan: Wuhan University of Technology,2006: 18-30．
[3] 须雷. 起重机的现代设计方法[J]. 起重运输机械, 1996(8): 3-7．
XU Lei. Modern design method of crane [J]. Lifting the Transport Machinery, 1996(8): 3-7．
[4] 张峰.NX Nastran基础分析指南[M].北京：清华大学出版社,2005：60-222．
[5] 李珩,童水光,舒胜宏,等.门式起重机载荷计算方法的研究[J].现代机械,2008(3): 30-33．
LI Heng, TONG Shui-guang, SHU Sheng-hong, et al. Calculation about the load of gantry crane [J]. Modern Machinery, 2008(3): 30-33．
[6] 王勖成,邵敏.有限单元法基本原理和数值方法[M].北京：清华大学出版社,1988: 143-299．
[7] 王世忠,孟庆元,高维成.结构力学与有限元法[M].哈尔滨：哈尔滨工业大学出版社, 2003: 111-140．
[8] 朱加铭,欧贵宝,何蕴增.有限元与边界元法[M].哈尔滨：哈尔滨工程大学出版社, 2002: 50123．
[9] 王仲仁,苑世剑,胡连喜.弹性与塑性力学基础[M].哈尔滨：哈尔滨工业大学出版社,2004: 40-76．
[10] GB3811-83.起重机设计规范[S].北京：北京起重运输机构研究所,19-83．
[11] 朱军,童水光,许跃敏. 门座起重机CAD系统界面开发平台的设计[J]. 计算机辅助设计与制造, 1998(4): 30-33．
ZHU Jun, TONG Shui-guang, XU Yue-min. The design of user interface developing platform of portal crane CAD system [J]. CAD/CAM, 1998(4): 30-33．
[12] 钟崴,唐宁,周鸿波,等. 锅炉设计计算案例管理的技术和方法[J]. 浙江大学学报：工学版, 2008, 42(5): 810-814．
ZHONG Wei, TANG Ning, ZHOU Hong-bo, et al. Technology and methods of case management for boiler design calculation [J]. Journal of Zhejiang University: Engineering Science, 2008, 42(5): 810-814． |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
