［1］ MAEX K, BAKLANOY M R, SHAMIRYAN D, et al. Low dielectric constant materials for microelectronics ［J］. Journal of Applied Physics, 2003, 93(11): 87938841．
［2］ HONG J K, KIM H R. The effect of sol viscosity on the sol-gel derived low density SiO2 xerogel film for intermetal dielectric application ［J］. Thin Solid Films, 1998, 332(1/2): 449454．
［3］ KIM J H, JUNG S B, PARK H H, et al. The effects of pre-aging and concentration of surface modifying agent on the microstructure and dielectric properties of SiO2 xerogel film ［J］. Thin Solid Films, 2000, 377/378: 467472．
［4］ SHEN J, LUO A,YAO L F, et al. Low dielectric constant silica films with ordered nanoporous structure ［J］. Materials Science and Engineering C, 2007, 27(5-8): 11451148．
［5］ FARRELL R A, CHERKAOUI K, PETKOY N, et al. Physical and electrical properties of low delectric constant self-assembled mesoporous silica thin films ［J］. Microelectronics Reliability, 2007, 47(4/5): 759763．
［6］ UCHIDA Y, HISHIYA S, FUJII N, et al. Effect of moisture adsorption on the properties of porous-silica ultralow-k films ［J］. Microelectronic Engineering, 2006, 83(11/12): 21262129．
［7］ LUO J T, WU W F, WEN H C, et al. The roles of hydrophobic group on the surface of ultralow dielectric constant porous silica film during thermal treatment ［J］. Thin Solid Films, 2007, 515(18-25): 72757280．
［8］ CHANG S Y, HUANG Y C. Analyses of interface adhesion between porous SiO2 low-k film and SiC/SiN layers by nanoindentation and nanoscratch tests ［J］. Microelectronic Engineering, 2007, 84(2): 319327．
［9］ CHANG S Y, HUANG Y C. Effect of plasma treatments on interface chemistru and adhesion strength between porous SiO2 low-k film and SiC/SiN layers ［J］. Microelectronic Engineering, 2008, 85(2): 332338．
［10］ DING S Q, ZENG Y P, JIANG D L. Oxidation bonding of porous silicon nitride ceramics with high strength and low dielectric constant ［J］. Materials Letters, 2007, 61(11/12): 22772280．
［11］ HAN G F, ZHANG L T, CHENG L F. Processing and performance of 2D fused-silica fiber reinforced porous Si3N4 matrix composites ［J］. Journal of University of Science and Technology, 2008, 15(1): 5861．
［12］ JOSHI S, KEN-ICHI K, HITOSHI O, et al. Microwave dielectric properties of porous Mg2SiO4 filling with TiO2 prepared by a liquid phase deposition process ［J］. Journal of the European Ceramic Society, 2007, 27(8/9): 31053108．
［13］ BOEY F Y C, TOK A I Y. Porous AlN ceramic substrates by reaction sintering ［J］. Journal of Materials Processing Technology, 2003, 140(1-3): 413419．
［14］ LAZAROUK S, KATSOUBA S, PONOMAR V, et al. Reliability of built in aluminum interconnection with low-ε dielectric based on porous anodic alumina ［J］. Solid-State Electronics, 2000, 44(5): 815818．
［15］ LAZAROUK S, KATSOUBA S, LESHOK A, et al. Porous alumina as low-ε insulator for multilevel metallization ［J］. Microelectronic Engineering, 2000, 50(1-4): 321327．
［16］ JIANG L Z, LIU J G, LI H Q, et al. A methodology for the preparation of nanoporous polyimide films with low dielectric constants ［J］. Thin Solid Films, 2006, 510(1/2): 241246．
［17］ LEE Y J, HUANG J M, KUO S W, et al. Low- dielectric nanoporous polyimide films prepared from PEO-POSS nanoparticles ［J］. Polymer, 2005, 46(23): 1005610065．
［18］ ZHANG H, ZHOU J, ZHANG X L, et al. High density polyethylene-grafted-maleic anhydride low-k porous films prepared via thermally induced phase separation ［J］. European Polymer Journal, 2008, 44(4): 10951101．
［19］ SHARANGPANI R,  SINGH R,  DREWS M, et al.Chemical vapor deposition and characterization of amorphous Teflon fluoropolymerthin films ［J］. Journal of Electronic Materials, 1997, 26(4): 402409．
［20］ DING J D, WANG P F, WAN X G, et al. Effects of thermal treatment on porous amorphous fluoropolymer film with a low dielectric constant ［J］. Materials Science and Engineering, 2001, 83(1-3): 130136．
［21］ WANG J H, LIU P T, CHANG T S, et al. Structural characteristics and interfacial reactions of low dielectric constant porous polysilazane for Cu metallization ［J］. Thin Solid Films, 2004, 469/470: 393397．
［22］ CHANG T C, LIU P T, CHEN C W, et al. CMP of ultra low-k material porous-polysilazane (PPSZ) for interconnect applications［J］.Thin Solid Films, 2004,447/448: 524530.
［23］ CHANG T C, TSAI T M, LIU P T, et al. Study on the effect of electron beam curing on low-K porous organosilicate glass (OSG) materials ［J］. Thin Solid Films, 2004, 469/470: 383387．
［24］ JOUSSEAUNE V, FAVENNEC L, ZENASNI A, et al. Porous ultra low k deposited by PECVD: from deposition to material properties ［J］. Surface & Coatings Technology, 2007, 201(22/23): 92489251．
［25］ YU S Z, TERENCE K S, WONG X H, et al. Synthesis and characterization of porous silsesquioxane dielectric films ［J］. Thin Solid Films, 2005, 473(2): 191195．
［26］ YU S Z, TERENCE K S, WEI J, et al. Structural, electrical and mechanical properties of templated silsesquioxane porous films ［J］. Microelectronic Engineering, 2005, 77(2): 125131．
［27］ VALENTINOTTI M, WALTER S, MODENA S, et al. Low dielectric constant porous BN/SiCO made by pyrolysis of filled gels ［J］. Journal of the European Ceramine Society, 2007, 27(6): 25292533．
［28］ LARLUS O, MINTOVA S, JEAN B, et al. Silicalite-1/polymer films with low-k dielectric constants ［J］. Applied Surface Science, 2004, 226(1-3): 155160．
［29］ MOSIG K, JACOBS T, BRENNAN K, et al. Integration challenges of porous ultra low-k spin-on delectrics ［J］. Microelectronic Engineering, 2002, 64(1-4): 1124