[1] EL REFAIE A M.Fractional slot concentrated windings synchronous permanent magnet machines:opportunities and challenges [J].IEEE Transactions on Industrial Electronics,2010,57(1):107-121.
[2] DE DONATO G,CAPPONI F G,RIVELLINI G A,et al.Integral slot versus fractional slot concentrated winding axial flux permanent magnet machines:comparative design,FEA and experimental tests [J].IEEE Transactions on Industry Applications,2012,48(5):1487-1495.
[3] YANG J Q, LIU G H, ZHAO W X,et al.Quantitative comparison for fractional slot concentrated winding configurations of permanent magnet vernier machines [J].IEEE Transactions on Magnetics,2013,49(7):3826-3829.
[4] 王建,张立军,余卓平,等.燃料电池轿车电机总成的振动阶次特征分析[J].汽车工程,2009,31(3):219-223.
WANG Jian,ZHANG Li jun,YU Zhuo ping,et al. An analysis on the vibration order feature of the electric motor assembly in a fuel cell car [J].Automotive Engineering,2009,31(3):219-223.
[5] 于增亮,张立军,孙北.轮毂电机驱动电动微型车车内噪声道路实验分析[J].上海汽车,2009,(8):8-13.
YU Zeng liang,ZHANG Li jun,SUN Bei.Road test analysis of interior of wheel hub motor driven micro electric vehicle [J].Shanghai Auto,2009,(8):8-13.
[6] 王秀和.永磁电机[M].北京:中国电力出版社,2011:47-168.
[7] ISLAM R,HUSAIN I,FARDOUN A,et al.Permanent magnet synchronous motor magnet designs with skewing for torque ripple and cogging torque reduction [J].IEEE Transactions on Industry Applications,2009,45(1):152-160.
[8] WANG D H, WANG X H, QIAO D W, et al.Reducing cogging torque in surface mounted permanent magnet motors by nonuniformly distributed teeth method [J].IEEE Transactions on Magnetics,2011,47(9):2231-2239.
[9] WANG D H, WANG X H, JUNG S Y.Cogging torque minimization and torque ripple suppression in surface mounted permanent magnet synchronous machines using different magnet widths [J].IEEE Transactions on Magnetics,2013,49(5):2295-2298.
[10] CHU W Q,ZHU Z Q.Investigation of torque ripples in permanent magnet synchronous machines with skewing [J].IEEE Transactions on Magnetics,2013,49(3):1211-1220.
[11] ZHU Z Q,HOWE D,CHAN C C.Improved analytical model for predicting the magnetic field distribution in brushless permanent magnet machines [J].IEEE Transactions on Magnetics,2002,38(1):229-238.
[12] ZARKO D,BAN D,LIPO T A.Analytical calculation of magnetic field distribution in the slotted air gap of a surface permanent magnet motor using complex relative air gap permeance [J].IEEE Transactions on Magnetics,2006,42(7):1828-1837.
[13] ZARKO D,BAN D,LIPO T A.Analytical solution for cogging torque in surface permanent magnet motors using conformal mapping [J].IEEE Transactions on Magnetics,2008,44(1):52-65.
[14] PROCA A B,KEYHANI A,EL ANTABLY A,et al.Analytical model for permanent magnet motors with surface mounted magnets [J].IEEE Transactions on Energy Conversion,2003,18(3):386-391.
[15] ZARKO D,BAN D,LIPO T A.Analytical solution for electromagnetic torque in surface permanent magnet motors using conformal mapping [J].IEEE Transactions on Magnetics,2009,45(7):2943-2954.
[16] 付媛,罗应立,陈伟华,等.自起动永磁电动机的稳态转矩波动研究[J] .电机与控制学报,2010,14(11):1-6.
FU Yuan,LUO Ying li,CHEN Wei hua et al.Research on torque fluctuation of line start PM motor based on time step finite element method [J].Electric Machines and Control,2010,14(11):1-6.
[17] ZHU Z Q,LEONG J H.Analysis and mitigation of torsional vibration of pm brushless AC/DC drives with direct torque controller [J].IEEE Transactions on Industry Applications,2012,48(4):1296-1306. |