机械工程 |
|
|
|
|
数控机床旋转轴转角定位误差测量方法 |
何振亚1,2,傅建中1,徐月同1 |
1. 浙江大学 机械工程学院, 浙江 杭州 310027;2. 华南理工大学 机械与汽车工程学院,广东 广州 510640 |
|
New method to measure angular position errors of rotational axis of CNC machine tool |
HE Zhen-ya1,2, FU Jian-zhong1, XU Yue-tong1 |
1.School of Mechanical Engineering, Zhejiang University, Hangzhou 310027, China; 2. School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510640, China |
[1] SCHWENKE H, KNAPP W, HAITJEMA H, et al. Geometric error measurement and compensation of machines—an update[J].CIRP Annals-Manufacturing Technology, 2008, 57(2): 660-675.
[2] LEI W, HSU Y. Error measurement of five-axis CNC machines with 3D probe–ball [J]. Journal of Materials Processing Technology, 2003, 139(1): 127-133.
[3] TSUTSUMI M, SAITO A. Identification and compensation of systematic deviations particular to 5-axis machining centers[J]. International Journal of Machine Tools and Manufacture, 2003, 43(8): 771-780.
[4] TSUTSUMI M, SAITO A. Identification of angular and positional deviations inherent to 5-axis machining centers with a tilting-rotary table by simultaneous four-axis control movements[J]. International Journal of Machine Tools and Manufacture, 2004, 44(12): 1333-1342.
[5] ZARGARBASHI S, MAYER J. Assessment of machine tool trunnion axis motion error, using magnetic double ball bar [J]. International Journal of Machine Tools and Manufacture, 2006, 46(14): 1823-1834.
[6] ZARGARBASHI S, MAYER J. Single setup estimation of a five-axis machine tool eight link errors by programmed end point constraint and on the fly measurement with Capball sensor[J]. International Journal of Machine Tools and Manufacture, 2009, 49(10): 759-766.
[7] ZHU S, DING G, QIN S, et al. Integrated geometric error modeling, identification and compensation of CNC machine tools [J]. International Journal of Machine Tools and Manufacture, 2012, 52(1): 24-29.
[8] 张大卫, 商鹏, 田延岭,等. 五轴数控机床转动轴误差元素的球杆仪检测方法[J]. 中国机械工程, 2008, 19(22): 2737-2741.
ZHANG Da-wei, SHANG Peng, TIAN Yan-ling, et al. A DBB-based alignment error measurement method for rotary axis of 5-axis CNC machine tool [J]. China Mechanical Engineering, 2008, 19(22): 2737-2741.
[9] LEE K I, LEE D M, YANG S H. Parametric modeling and estimation of geometric errors for a rotary axis using double ball-bar[J]. The International Journal of Advanced Manufacturing Technology, 2012, 62(5/8): 741-750.
[10] 李郝林, 吴晓健. 数控机床回转工作台转角误差测量方法: 中国, 2010102566294\[P\]. 2010-12-15.
Li Hao-lin, Wu Xiao-jian. An angular errors measurement method for the rotational table of CNC machine tools: China, 2010102566294\[P\]. 2010-12-15.
[11] 梁军, 舒阳, 黄宁秋,等. 激光角度干涉仪测量数控转台位置精度的装置: 中国, 201010028151\[P\]:X, 2010-08-11.
Liang Jun, Shu Yang, Huang Ning-qiu, et al. An angular laser interferometer equipment to measure position errors of rotational table for CNC machine tools: China, 201010028151,\[P\].X. 2010-08-11.
[12] 商鹏, 阮宏慧, 张大卫. 基于球杆仪的三轴数控机床热误差检测方法[J]. 天津大学学报, 2006, 39(11): 1336-1340.
SHANG Peng, RUAN Hong-hui, ZHANG Da-wei. Double-bal1-bar based thermal errors measurement method for 3-axis CNC machine tool[J]. Journal of Tianjin University, 2006, 39(11): 1336-1340.
[13] LIN Y, SHEN Y. Modelling of five-axis machine tool metrology models using the matrix summation approach [J]. The International Journal of Advanced Manufacturing Technology, 2003, 21(4): 243-248. |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|