Please wait a minute...
浙江大学学报(工学版)
J4  2013, Vol. 47 Issue (10): 1777-1783    DOI: 10.3785/j.issn.1008-973X.2013.10.012
自动化技术、电信技术     
采用新型低成本共模反馈电路的全差分运放设计
雷鑑铭, 胡北稳, 桂涵姝, 张乐
华中科技大学 电子科学与技术系,湖北 武汉 430074
Design of fully differential operational amplifier with low cost common feedback circuit
LEI Jian-ming, HU Bei-wen, GUI Han-shu, ZHANG Le
Department of Electronic Science and Technology, Huazhong University of Science and Technology, Wuhan 430074, China
 全文: PDF  HTML
摘要：

设计应用于流水线型ADC的全差分运算放大器. 运放中共模反馈电路采用调节反馈深度和共用差分信号通路的新型结构来实现,用简单的结构实现了高环路增益,通过降低反馈系数的方法防止电路产生自激振荡,避免了因引用补偿电容带来的高成本和高设计难度.放大器采用两级折叠共源共栅结构并进行频率补偿,输出级采用推挽式AB类结构.设计的全差分运算放大器基于中芯国际（SMIC）0.35 μm工艺.后仿结果表明,放大器直流增益为100 dB,负载为3 pF时单位增益带宽为359 MHz,相位裕度为68°,建立时间为12.3 ns,满足ADC所要求的性能指标,适用于高精度流水线型ADC中的级间增益电路和采样保持电路.
Abstract:

A fully differential operational amplifier (AMP) for pipelined ADC was designed. A simple common mode feedback (CMFB) structure by adjusting the feedback quantity and sharing the differential signal path was proposed to improve the loop gain. The auto-oscillation of the circuit was prevented by reducing the feedback coefficient, and the high design cost and high design difficulty caused by the application of the compensation capacitance were avoided. The amplifier contains a two-stage folded cascode architecture and is frequency compensated, and the output stage uses a push-pull class-AB structure. The amplifier uses the SMIC 0.35 μm technology. The post-layout simulation results show that the open gain is up to 100 dB, the unity gain bandwidth (UGB) is 359 MHz with a 3 pF load, the phase margin (PM) is 68° and the settling time is 12.3 ns. All the specifications meet the design requirements of the ADC. This fully differential operational amplifier is appropriate to be used in the inter-stage gain circuit and the sample-hold circuit of high accuracy pipelined ADC.
出版日期: 2013-10-01
:  TN 432  
基金资助:

 国家自然科学基金资助项目（60706003）.
作者简介: 雷鑑铭（1974—）,男，副教授，硕导，从事超大规模混合信号集成电路设计的研究. E-mail: leijianming@mail.hust.edu.cn
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

雷鑑铭, 胡北稳, 桂涵姝, 张乐. 采用新型低成本共模反馈电路的全差分运放设计[J]. J4, 2013, 47(10): 1777-1783.

LEI Jian-ming, HU Bei-wen, GUI Han-shu, ZHANG LeLEI Jian-ming, HU Bei-wen, GUI H. Design of fully differential operational amplifier with low cost common feedback circuit. J4, 2013, 47(10): 1777-1783.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2013.10.012    或    http://www.zjujournals.com/eng/CN/Y2013/V47/I10/1777

［1］ HATI M K, BHATTACHARYYA T K. Design of a low power, high speed complementary input folded regulated cascode OTA for a parallel pipeline ADC ［C］∥ IEEE Computer Society Annual Symposium. Chennai: IEEE, 2011: 114-119.

［2］ KIM Y J, CHOI H C, AHN G C, et al. A 12 bit 50MS/s CMOS nyquist A/D converter with a fully differential class-AB switched op-amp ［J］. IEEE Journal of Solid-State Circuits, 2010, 45(3): 620-628.

［3］ 唐宁,杨秋玉,翟江辉. 高性能全差分运算放大器设计［J］. 微电子学,2011, 41(5): 636-639.

TANG Ning, YANG Qiu-yu, ZHAI Jiang-hui. Design of a high performance fully differential operational amplifier ［J］. Microelectronics, 2011, 41(5): 636-639.

［4］ 尹浩,陈必江,李靖,等. 适用于全差分运算放大器的两级共模反馈结构［J］. 微电子学,2011, 41(2): 172-175.

YIN Hao, CHEN Bi-jiang, LI Jing, et al. Two-stage common-mode feedback structures for fully differential operational amplifier ［J］. Microelectronics, 2011, 41(2): 172-175.

［5］ RAHIM S A E A, AZMI I M. A CMOS single stage fully differential folded cascode amplifier employing gain boosting technique ［C］ ∥13th International Symposium on Integrated Circuits. Singapore: IEEE, 2011: 234-237.

［6］ 朱臻,王涛,易婷,等. 一种用于高速A/D转换器的全差分、低功耗CMOS运算跨导放大器［J］. 复旦学报：自然科学版,2001, 40(1): 79-85.

ZHU Zhen, WANG Tao, YI Ting, et al. A full differential, low power consumption CMOS operational transconductance amplifier (OTA) ［J］. Journal of Fudan University: Natural Science, 2001, 40(1): 79-85.

［7］ WANG Jia-cheng, ZHU Di, GUO Le-le, et al. A 22mW 10-bit 150-MS/s pipelined ADC in 1.2V 65nm CMOS ［C］ ∥10th International Conference on Solid-State and Integrated Circuit Technology. Shanghai: IEEE, 2010: 454-456.

［8］ PERMATASARI S I, HUTABARAT M T, ADISENO A. Design of 12-bit, 40MS/S pipeline ADC for application in WiMAX transceiver ［C］∥ International Conference on Electrical Engineering and Informatics. Bandung: IEEE, 2011: 14.

［9］ ALLEN P E, HOLBERG D R. CMOS模拟集成电路设计［M］. 2版. 北京：电子工业出版社,2005.

［10］ 王会影,徐祥柱,张雨河,等. 一种适用于D类音频功放的全差分运算放大器［J］. 微电子学,2012, 42(1): 13-16.

WANG Hui-ying, XU Xiang-zhu, ZHANG Yu-he, et al. A fully-differential operational amplifier for class D audio amplifier ［J］. Microelectronics, 2012, 42(1): 13-16.

［11］ 陈殿玉,岂飞涛,秦世才.一种提高共模反馈稳定性的新方法［J］.南开大学学报：自然科学版,2007,40(2): 8386.

CHEN Dian-yu, QI Fei-tao, QIN Shi-cai. A new technique to improve the stability of the CMFB ［J］. Acta Scientiarum Naturallum: Universitatis Nakaiensis, 2007, 40(2): 83-86.

［12］ 成东波,孙玲玲,洪慧,等. 一种带共模反馈电路的套筒式全差分运算放大器［J］. 微电子学,2011, 41(3): 336-340.

CHENG Dong-bo, SUN Ling-ling, HONG Hui, et al. A telescopic fully differential amplifier with CMFB circuit ［J］. Microelectronics, 2011, 41(3): 336-340.

［13］ 宋奇伟,张正平.一种新型高速CMOS全差分运算放大器设计［J］.现代电子技术,2012, 35(4): 166-172.

SONG Qi-wei, ZHANG Zheng-ping. Design of a novel high-speed fully-differential CMOS op-amp ［J］. Modern Electronics Technique, 2012, 35(4): 166-172.

［14］ 蔡坤明,何杞鑫,陶吉利,等.一种增益增强型套筒式运算放大器的设计［J］.电子技术应用,2010, 36(5): 66-69.

CAI Kun-ming, HE Qi-xin, TAO Ji-li, et al. Design of a gain-boosted telescopic operational amplifier ［J］. Application of Integrated Circuits, 2010, 36(5): 66-69.
[1] 杭国强, 李锦煊, 王国飞. 新型钟控神经元MOS采样/保持电路[J]. J4, 2012, 46(2): 333-337.
[2] 韩雁 , 廖璐 , 黄小伟 , 张昊 , 王昊. 多比特量化的音频DAC中模拟电路的设计[J]. J4, 2011, 45(9): 1571-1575.
[3] 肖林荣, 陈偕雄, 应时彦. 基于模块化技术的最佳ULG.2的QCA电路设计[J]. J4, 2011, 45(6): 1032-1037.
[4] 徐扬, 沈继忠. 基于门控时钟的低功耗时序电路设计新方法[J]. J4, 2010, 44(9): 1724-1729.
[5] 徐科君, 许文曜, 沈继忠, 等. 双电压动态可重构FPGA任务模型及调度算法[J]. J4, 2010, 44(2): 300-304.
[6] 杭国强, 应时彦. 新型电流型CMOS四值边沿触发器设计[J]. J4, 2009, 43(11): 1970-1974.
[7] 章丹艳, 吴晓波, 赵梦恋, 等. 光伏电池最大功率点跟踪芯片的设计[J]. J4, 2009, 43(11): 2000-2005.