能源工程 |
|
|
|
|
动力舱冷却模块优化匹配方法实验 |
刘震涛,吕锋,俞小莉 |
浙江大学 动力机械及车辆工程研究所,浙江 杭州 310027 |
|
Experiments on match optimization of underhood cooling module |
LIU Zhen-tao, LV Feng,YU Xiao-li |
Power Machinery & Vehicular Engineering Institute,Zhejiang University, Hangzhou 310027,China |
[1] 姚仲鹏, 王国新. 车辆冷却传热[M]. 北京: 北京理工大学出版社, 2001:222-227. [2] 胡群,韩同群,张云鹏. 车用涡轮增压汽油机冷却系统设计与匹配 [J].湖北汽车工业学院学报, 2008,22(4):18-22. HU Qun,HAN Tongqun,ZHANG Yunpeng. Design and match of one turbocharge engine cooling system [J]. Journal of Hubei Automotive Industries Institute, 2008,22(4):18-22. [3] FRANK G R. Engine cooling system design for heavy duty trucks [J]. SAE Transactions, 770023, 1977, 86(1):78-87. [4] 王刚,李云清,梁新月,等. 对某型发动机冷却系统的设计与匹配研究[J].车辆与动力技术,2007,108(4):32-35. WANG Gang,LI Yunqing,LIANG Xinyue,et al. The design and matching of cooling system for one engine [J]. Vehicle & Power Technology, 2007,108(4):32-35. [5] 陆国栋,俞小莉,张毅,等. 间距对轮式装载机冷却组性能影响的风洞试验[J].浙江大学学报,2007,41(4):574-576. LU Guodong,YU Xiaoli,ZHANG Yi,et al. Wind tunnel test of spacing effects on wheel loader cooling packege performance [J]. Journal of Zhejiang University : Engineering Science, 2007,41(4):574-576. [6] HALLQVIST T. The cooling airflow of heavy trucks — a parametric study [C]∥SAE World Congress & Exhibition, Thermal Management Systems (Part 1 of 2). Detroit: SAE, 2008: 2008-01-1171. [7] HUSSEIN J, WATKINS S,DIXON C. Reduced drag and adequate cooling for passenger vehicles using variable area front air intakes [C]∥SAE World Congress & Exhibition, Vehicle Aerodynamics (Part 2 of 5). Detroit: SAE, 2006: 2006-01-0342. |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|