Please wait a minute...
J4  2013, Vol. 47 Issue (7): 1274-1280    DOI: 10.3785/j.issn.1008-973X.2013.07.021
机械与能源工程     
飞机翼身交点精加工通信系统设计与集成技术
郑思渊1,王青1,李江雄1,柯映林1,李松2
1.浙江大学 机械工程学系,浙江 杭州 310027;2.成都飞机工业(集团)有限责任公司部装厂,四川 成都 610092 
Design and integration technology of communication system of
finish machining for aircraft fuselage-wing joints
ZHENG Si-yuan1, WANG Qing1, LI Jiang-xiong1, KE Ying-lin1,LI Song2
. Department of Mechanical Engineering, Zhejiang University, Hangzhou 310027, China;
2. Chengdu Aircraft Industrial(Group) Limited Liability Company, Chengdu 610092, China
 全文: PDF  HTML
摘要:

针对飞机翼身交点精加工现场协调与监控不便,过多的人工参与会带来较大的风险和不确定性问题,为了消除机身、机翼制造与装配误差,提高自身制造准确度及翼身协调准确度,提出基于西门子SINUMERIK 840D数控系统的飞机翼身交点精加工通信系统的设计与集成方法.结合现场飞机数字化装配系统配置及翼身交点孔精加工工艺流程,有效集成数控加工技术及数字化孔/面测量技术,开发了数控机床状态监控、精加工任务管理和站位管理等功能.将可加工性评价、交点孔/面精加工和精加工检验等环节有机结合,实现了精加工过程的自动化集成.通过实际机型精加工应用验证,该软件系统满足实际工程需要.

Abstract:

Aiming at the inconvenience of the site coordination, monitoring and more risks and uncertainty caused by the participation of human in aircraft fuselage-wing joints finish machining, a design and integration method of assistant communication system of finish machining for fuselage-wing joints based on Siemens SINUMERIK 840D CNC system was presented in order to eliminate manufacturing and assembly tolerance and enhance accuracy of self-manufacturing and fuselage-wing coordination. The method develops functions of machine status monitoring, finish machining task management and station management by integrating SIMENS SinCOM ActiveX and digital method for finish machining and measurement. The method realizes the automatic integration of finish machining by combining feasibility evaluation, finish machining for hole and facet on joints and checking of finished product. The application results show that this software is feasible.

出版日期: 2013-07-01
:  TP 319  
基金资助:

国家自然科学基金资助项目(50905161); 中央高校基本科研业务费专项资金资助项目(2012FZA4002); 浙江省公益技术应用研究资助项目(2010C31097).

通讯作者: 王青,男,副教授.     E-mail: wqing@zju.edu.cn
作者简介: 郑思渊(1987-), 男, 硕士生, 从事飞机数字装配的研究. E-mail: zhengsiyuan1987@gmail.com
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

郑思渊,王青,李江雄,柯映林,李松. 飞机翼身交点精加工通信系统设计与集成技术[J]. J4, 2013, 47(7): 1274-1280.

ZHENG Si-yuan, WANG Qing, LI Jiang-xiong, KE Ying-lin,LI Song. Design and integration technology of communication system of
finish machining for aircraft fuselage-wing joints. J4, 2013, 47(7): 1274-1280.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2013.07.021        http://www.zjujournals.com/eng/CN/Y2013/V47/I7/1274

[1] 曾六生. 飞机部件装配精加工[J]. 航空制造技术, 2002(10): 63-66.
ZENG Liu-sheng. Finish machining in assembling aircraft component [J]. Aeronautical Manufacturing Technology, 2002(10): 63-66.
[2] 黄翔,李泷杲,陈磊.民用飞机大部件数字化对接关键技术[J].航空制造技术,2010(3): 54.
HUANG Xiang, LI Long-gao, CHEN Lei. Key technologies of digital final assembly for civil aircraft [J]. Aeronautical Manufacturing Technology, 2010(3): 54.
[3] 王亮,李东升,刘风贵,等. 飞机壁板类组件数字化装配柔性工装技术及应用[J].新视点,2010(10): 5-8.
WANG Liang, LI Dong-sheng, LIU Feng-gui, et al. Flexible tooling technology and application for digital assembly of aircraft panel component [J]. New Viewpoint, 2010(10): 5-8.
[4] 杨雷, 孙海泳. 波音737尾段组件的装配和精加工技术[J]. 航空制造技术, 2004(10): 92-95.
YANG Lei, SUN Hai-yong. Assembly and finish machining technology of the tail assembly parts of Boeing737 [J]. Aeronautical Manufacturing Technology, 2004(10): 92-95.
[5] 熊瑞斌. 飞机数字化装配中大部件位姿跟随固持方法及关键技术研究[D]. 杭州: 浙江大学, 2009.
XIONG Rui-bin. Large-size components posture following and keeping method and key technique research in aircraft digital assembly [D]. Hangzhou: Zhejiang University, 2009.
[6] 刘楚辉, 李江雄, 董辉跃,等. 飞机机身-机翼接头精加工条件评价技术[J]. 航空学报, 2010, 31(6): 1273-1279.
LIU Chu-hui, LI Jiang-xiong, DONG Hui-yue, et al. Finish machining condition evaluation technology for aircraft fuselage-wing joints [J]. Acta Aeronautica Et Astronautica Sinica, 2010, 31(6): 1273-1279.
[7] 刘楚辉, 柯映林.飞机翼身对接装配中的接头测量与评价技术[J]. 浙江大学学报:工学版, 2011, 45(2): 201-208.
LIU Chu-hui, KE Ying-lin. Joint measuring and evaluating technology for final assembly of aircraft wing and fuselage [J]. Journal of Zhejiang University: Engineering Science, 2011, 45(2): 201-208.
[8] 蒋启梅. 数控车间生产管理集成系统应用[J]. 航空制造技术, 2011(7): 52-55.
JIANG Qi-mei. Integrated production management system in NC workshop [J]. Aeronautical Manufacturing Technology, 2011(7): 52-55.
[9] 张国雄.三坐标测量机[M].天津:天津大学出版社,1999: 18-27.
[10] WEBER T, MOTAVALLI S, FALLAHI B, et al. Unified approach to form error evaluation [J]. Precision Engineering, 2002, 26(2): 269-278.
[11] 樊留群, 张为民, 马玉敏, 等. 840D数控系统的联网应用[J].机械与电子, 2002(5): 7-8.
FAN Liu-qun, ZHANG Wei-min, MA Yu-min, et al. CNC machine for network manufacturing implementation method by Siemens 840 D with software Sincom [J]. Machinery and Electronics, 2002(5): 7-8.
[12] 杨斌.西门子SINUMERIK 840D数控系统介绍[J]. 现代制造, 2004(6) : 87-88.
YANG Bin. Introduction for Simens SINUMERIK 840D CNC system [J]. Modern Manufacturing, 2004(6): 87-88.
[13] SIMENS. IT solutions for machine tools [EB/OL]. http:∥www.ad.siemens.de/sinumerik. 2011-10-25.

No related articles found!