Please wait a minute...
J4  2011, Vol. 45 Issue (7): 1265-1268    DOI: 10.3785/j.issn.1008-973X.2011.07.021
机械与能源工程     
双互易杂交边界点法参数及域内节点分布
樊志华
杭州电子科技大学 机械工程学院,浙江 杭州 310018
Parameter and arrangement of domain nodes for dual
reciprocity hybrid boundary node method
FAN Zhi-hua
School of Mechanical Engineering, Hangzhou Dianzi University, Hangzhou 310018, China
 全文: PDF  HTML
摘要:

为了解决双互易杂交边界点法推广应用中存在的障碍和缺点,如自由参数过多、域内节点数量及分布无规律可循等缺点,选取不同的有代表性的算例,分别研究双互易杂交边界点法自由参数的选择、自由参数与精度之间的关系、域内节点的布置数量和位置与精度之间的关系等.通过理论分析和数值实验得出:子域半径的较佳取值为0.85,子域半径与形状参数的最佳比值为1.0~1.3;当域内节点数量与边界节点数量接近时,计算效率达到最大;域内节点宜较多地布置在平行于梯度大的方向上.

Abstract:

The dual reciprocity hybrid boundary node method (DHBNM) has some disadvantages, such as too many free parameters and no rule for number and location for domain nodes. Some related studies about the choose of free parameters of DHBNM, the relations between free parameters and precision and the number and location of domain nodes were conducted by choosing some representative examples in order to solve the problems of DHBNM. The theoretical results and the numerical results show that the radius of subdomain is 0.85,and the ratio between radius of subdomain and shape parameter is chosen as 1.0 to 1.3. The calculation efficiency arrive the maximum when domain node number is equal to boundary node number. Domain node is arranged parallel to the high gradient direction.

出版日期: 2011-07-01
:  O 241  
作者简介: 樊志华(1973-),女,讲师,从事机械设计及理论、数字分析的研究. E-mail:fanzhih@163.com
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
作者相关文章  

引用本文:

樊志华. 双互易杂交边界点法参数及域内节点分布[J]. J4, 2011, 45(7): 1265-1268.

FAN Zhi-hua. Parameter and arrangement of domain nodes for dual
reciprocity hybrid boundary node method. J4, 2011, 45(7): 1265-1268.

链接本文:

https://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2011.07.021        https://www.zjujournals.com/eng/CN/Y2011/V45/I7/1265

[1] LUCY L B. A numerical approach to the testing of the fission hypothesis [J]. The Astron J, 1977, 8(12): 1013-1024.
[2] BELYTSCHKO T, LU Y Y, GU L. Elementfree Galerkin methods [J]. International Journal for Numerical Method in Engineering, 1994, 37(2): 229-256.
[3] ATLURI S N, ZHU T L. A new meshless local PetrovGalerkin (MLPG) approach in computational mechanics [J]. Computational Mechanics, 1998, 22(2): 117-127.
[4] 杨红坡, 谢新宇, 张继发, 等. 弹塑性土质边坡再生核质点法分析[J]. 浙江大学学报: 工学版, 2006, 40(3): 490-493.
YANG Hongpo, XIE Xinyu, ZHANG Jifa, et al. Stability analysis of elastoplastic soil slope by reproducing kernel particle method [J]. Journal of Zhejiang University: Engineering Science, 2006, 40(3): 490-493.
[5] 李重视, 闫丹丹, 朱善安, 等. 基于无网格有限元方法的心磁场计算仿真研究[J]. 浙江大学学报:工学版, 2010, 44(3): 463-467.
LI Zhongshi, YAN Dandan, ZHU Shanan, et al. Simulation of MCG problem by using meshless finite element method [J]. Journal of Zhejiang University: Engineering Science, 2010, 44(3): 463-467.
[6] ZHANG J M, YAO Z H. Analysis of 2D thin structure by the meshless regular hybrid boundary node method [J]. Acta Mechanica Solida Sinica, 2002, 15(1): 36-44.
[7] ZHANG J M, MASATAKA T, TOSHIRO M. Meshless analysis of potential problems in three dimensions with the hybrid boundary node method [J]. Journal for Numerical Methods in Engineering, 2004, 59(9): 1147-1168.
[8] MUKHERJEE Y X, MUKHERJEE S. The boundary node method for potential problems [J]. Journal for Numerical Methods in Engineering, 1997, 40(5): 797-815.
[9] YAN F, MIAO Y, YANG Q N. Quasilinear hybrid boundary node method for solving nonlinear problems [J]. CMESComputer Modeling in Engineering and Science, 2009, 46(1): 21-50.
[10] YAN F, WANG Y H, THAM L G, et al. Dual reciprocity hybrid boundary node method for 2D elasticity with body force [J]. Engineering Analysis with Boundary Elements, 2008, 32(9): 713-725.
[11] YAN F, WANG Y H, MIAO Y, et al. Dual reciprocity hybrid boundary node method for threedimensional elasticity with body force [J]. Acta Mechanica Solida Sinica, 2008, 21(3): 267-277.
[12] YAN F, WANG Y H, MIAO Y, et al. Dual reciprocity hybrid boundary node method for free vibration analysis [J]. Journal Sound and Vibration, 2009, 321(3/4/5): 1036-1057.

No related articles found!