机械工程 |
|
|
|
|
海水淡化轴向柱塞泵静压支承滑靴副的 流固耦合分析 |
翟江,周华 |
浙江大学 流体传动与控制国家重点实验室,浙江 杭州 310027 |
|
Fluid-solid coupling analysis for hydrostatic supporting slipper pair of axial piston pump for seawater desalination |
ZHAI Jiang, ZHOU Hua |
State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou 310027, China |
[1] 王世昌. 海水淡化工程[M]. 北京:化学工业出版社, 2003:73-74. [2] MENS J W M, DE GEE A W J. Friction and wear behaviour of 18 polymers in contact with steel in environments of air and water [J]. Wear, 1991, 149(1/2): 255-268. [3] YANG H, YANG J, ZHOU H. Research on materials of piston and cylinder of water hydraulic pump [J]. Industrial Lubrication and Tribology, 2003, 55(1): 38-43. [4] LIU Y S, WU D F, HE X F, et al. Materials screening of matching pairs in a water hydraulic piston pump [J]. Industrial Lubrication and Tribology,2009, 61(2/3): 173-178. [5] NIE S L, HUANG G H, LI Y P. Tribological study on hydrostatic slipper bearing with annular orifice damper for water hydraulic axial piston motor [J]. Tribology International, 2006, 39(11): 1342-1354. [6] WANG X, YAMAGUCHI A. Characteristics of hydrostatic bearing/seal parts for water hydraulic pumps and motors. Part 1: Experiment and theory [J]. Tribology International, 2002, 35(7): 425-433. [7] 焦素娟. 纯水液压柱塞泵及溢流阀关键技术的研究[D]. 杭州:浙江大学, 2004. JIAO Sujuan. The tribological properties of key friction pairs in water hydraulic piston pump and water hydraulic relief valves [D].Hangzhou: Zhejiang University, 2004. [8] ROKALA M, CALONIUS O, KOSKINEN K T, et al. Study of lubrication conditions in slipperswashplate contact in water hydraulic axial piston pump test rig [C]// Proceedings of the 7th JFPS International Symposium on Fluid Power. Japan: [s. n.], 2008:91-94. [9] 许耀铭. 油膜理论与液压泵和马达的摩擦副设计[M]. 北京:机械工业出版社, 1987:193-261. [10] 盛敬超. 液压流体力学[M]. 北京:机械工业出版社, 1980:125-132. |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|