Please wait a minute...
浙江大学学报(工学版)  2018, Vol. 52 Issue (10): 1935-1942    DOI: 10.3785/j.issn.1008-973X.2018.10.013
土木工程     
T形钢连接梁柱半刚性节点初始转动刚度计算公式
夏永强, 肖南
浙江大学 建筑工程学院, 浙江 杭州 310058
Initial rotational stiffness formula of semi-rigid joint with T-stub in beam-to-column connection
XIA Yong-qiang, XIAO Nan
College of Civil Engineering and Architecture, Zhejiang University, Hangzhou 310058, China
 全文: PDF(1644 KB)   HTML
摘要:

为了确定T形钢连接半刚性节点的初始刚度,分析T形钢连接梁柱节点的变形特征.以节点处与梁端受拉侧翼缘相连的T形钢为研究对象,将T形连接件翼缘受力视为简支梁,建立T形钢连接节点在弹性阶段的初始转动刚度计算模型,推导初始转动刚度的计算公式.采用数值模拟和已有试验数据,对所推导公式进行对比分析.结果表明,节点的初始转动刚度主要取决于T形钢连接件的翼缘厚度、T形钢翼缘上螺栓的位置和梁的高度,通过推导公式所得的初始刚度大于数值模拟和试验所得刚度.为了更加准确地预测节点初始转动刚度,引入刚度修正系数,分别采用修正后的刚度公式和已有的计算公式计算案例.结果表明,修正后的刚度公式能够更好地符合试验结果.

Abstract:

The deformation characteristics of the joint were analyzed in order to determine the initial stiffness of semi-rigid joint with T-stub. Then the flange of T-stub bolted on the tensile side of the beam section, which was deemed as main research object, was regarded as simply supported beam. The calculation model for the initial rotational stiffness of the joint during elastic phase was established, and the analytical formula of initial rotational stiffness was deduced. Numerical simulation and experimental data were employed for comparison with the results from the proposed formula respectively. Results show that the initial rotational stiffness of the joint mainly depends on the flange thickness of the T-stub, distance between bolts linking the flange of T-stub to steel column, and the height of the beam. The values calculated by the proposed formula are greater than those from numerical simulation and experiments. A stiffness modified coefficient was introduced into the analytical formula to predict the initial rotational stiffness more accurately. The results from modified formula applied for case studies accorded better with the experimental data than those from previous formula proposed by researchers.

收稿日期: 2017-08-21 出版日期: 2018-10-11
CLC:  TU312  
基金资助:

国家自然科学基金资助项目(51578491)

通讯作者: 肖南,男,博士,副教授.orcid.org/0000-0003-3778-0971.     E-mail: sholran@zju.edu.cn
作者简介: 夏永强(1994-),男,硕士生,从事结构工程研究.orcid.org/0000-0001-8607-4876.E-mail:21612026@zju.edu.cn
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
作者相关文章  

引用本文:

夏永强, 肖南. T形钢连接梁柱半刚性节点初始转动刚度计算公式[J]. 浙江大学学报(工学版), 2018, 52(10): 1935-1942.

XIA Yong-qiang, XIAO Nan. Initial rotational stiffness formula of semi-rigid joint with T-stub in beam-to-column connection. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2018, 52(10): 1935-1942.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2018.10.013        http://www.zjujournals.com/eng/CN/Y2018/V52/I10/1935

[1] 姚谏, 夏志斌. 钢结构原理与设计[M]. 北京:中国建筑工业出版社, 2011.
[2] POPOV E P, YANG T S, CHANG S P. Design of steel MRF connections before and after 1994 Northridge earthquake[J]. Engineering Structures, 1998, 20(12):1030-1038.
[3] KISHI N, CHEN W F. Moment-rotation relations of semirigid connections with angles[J]. Journal of Structural Engineering, ASCE, 1991, 117(9):2811-2815.
[4] CHEN W F, KISHI N. Semi rigid steel beam-to-column connections:database and modeling[J]. Journal of Structural Engineering, 1989, 115(1):105-119.
[5] ABDALLA K M, CHEN W F. Expanded database of semi-rigid steel connections[J]. Computers and Structures, 1995, 56(4):553-564.
[6] NETHERCOT D A. Steel beam-to-column connections:a review of test data and its applicability to the evaluation of joint behavior in the performance of steel frames[C]//CIRIA Project Record. London:[s.n.], 1985:338.
[7] NETHERCOT D A. (1985b) Utilization of experimentally obtained connection data in assessing the performance of steel frames, in connection flexibility and steel frames[C]//Proceedings of a Session Sponsored by the Structural Division. Detroit:ASCE, 1985:13-37.
[8] COELHO A, BIJLAARD F, GRESNIGT N, et al. Experimental assessment of the behaviour of bolted T-stub connections made up of welded plates[J]. Journal of Constructional Steel Research, 2004, 60(2):269-311.
[9] PILUSO V, RIZZANO G. Experimental analysis and modelling of bolted T-stubs under cyclic loads[J]. Journal of Constructional Steel Research, 2008, 64(6):655-669.
[10] 舒兴平, 胡习平, 熊曜. 钢框架梁柱T型钢半刚性连接节点的性能研究[J]. 建筑结构, 2006, 36(8):6-9 SHU Xing-ping, HU Xi-ping, XIONG Yao. Research on the behavior of T-stub semi-rigid connections of steel frames[J]. Building Structure, 2006, 36(8):6-9
[11] 舒兴平, 胡习兵. T型钢半刚性连接节点的承载力分析[J]. 钢结构, 2005, 20(81):35-40 SHU Xing-ping, HU Xi-bing. Analysis of the load-bearing capacity of T-stub semi-rigid connections[J]. Steel Construction, 2005, 20(81):35-40
[12] 徐凌, 朱浮声, 李晓龙. 不同节点轻钢框架的受力性能试验研究[J]. 东北大学学报:自然科学版, 2006, 27(10):1165-1168 XU Ling, ZHU Fu-sheng, LI Xiao-long. Experimental study on light-weight steel frames with different semi-rigid joints[J]. Journal of Northeastern University:Natural Science, 2006, 27(10):1165-1168
[13] 王新武, 李捍无, 蒋沧如. 剖分T型钢梁柱连接的滞回性能试验研究[J]. 华中科技大学学报:城市科学版, 2003, 20(2):47-49 WANG Xin-wu, LI Han-wu, JIANG Cang-ru. Experimental research on hysteretic behavior of the slit T steel connections[J]. Journal of Huazhong University of Science and Technology:Urban Science Edition, 2003, 20(2):47-49
[14] 李凤霞, 布欣, 王新武. 剖分T型钢梁柱连接滞回性能研究[J]. 建筑科学, 2010, 26(5):28-32 LI Feng-xia, BU Xin, WANG Xin-wu. Research on hysteretic behavior of the slit T steel beam-column connections[J]. Building Science, 2010, 26(5):28-32
[15] 李泽深, 李秀梅, 郑小伟, 等. T形钢连接梁柱半刚性节点滞回性能试验研究及数值分析[J]. 建筑结构学报, 2014, 35(7):61-68 LI Ze-shen, LI Xiu-mei, ZHENG Xiao-wei, et al. Experimental study and numerical investigation on hysteretic behavior of T-stub semi-rigid beam-to-column connections[J]. Journal of Building Structures, 2014, 35(7):61-68
[16] 李泽深, 覃达威, 张克实, 等. 不同构造T形钢连接节点受力性能分析[J]. 广西大学学报, 2016, 41(1):74-82 LI Ze-shen, QIN Da-wei, ZHANG Ke-shi, et al. Influence of different joints on structural performance of T-stub connections[J]. Journal of Guangxi University, 2016, 41(1):74-82
[17] 舒赣平, 杜二峰, 张欣欣, 等. T型钢连接梁柱节点抗火性能试验研究[J]. 工程力学, 2016, 33(7):136-143 SHU Gan-ping, DU Er-feng, ZHANG Xin-xin, et al. Experimental study on the fire performance of steel beam-column T-stub joints[J]. Engineering Mechanics, 2016, 33(7):136-143
[18] 韩冬, 布欣, 王新武. 空间剖分T型钢梁柱连接角柱节点抗震试验[J]. 浙江大学学报:工学版, 2017, 51(2):287-296 HAN Dong, BU Xin, WANG Xin-wu. Experiment on seismic performance of spatial beam to corner column connection with T-stub[J]. Journal of Zhejiang University:Engineering Science, 2017, 51(2):287-296
[19] BU X, GU Q, WANG X W. Research on seismic performance of spatial beam to column connection with T-stubs[M]//DONG L C, HUANG P H, OZBAKKALOGLU T. AER-Advances in engineering research. Paris:Atlantis Press, 2016:544-549.
[20] 李秀梅, 张克实, 王涛. 梁柱T形钢连接节点力学性能及加强方式研究[J]. 建筑结构, 2015, 45(3):53-58 LI Xiu-mei, ZHANG Ke-shi, WANG Tao. Study on mechanical property and strengthening method of steel beam-to-column T-stub connections[J]. Building Structure, 2015, 45(3):53-58
[21] 王振宇, 张劲帆, 方成. 半刚性节点初始刚度的组件式计算模型[J]. 浙江大学学报:工学版, 2012, 46(11):1995-2006 WANG Zhen-yu, ZHANG Jin-fan, FANG Cheng. Study on the component-based model of semi-rigid beam-to-column joints initial stiffness[J]. Journal of Zhejiang University:Engineering Science, 2012, 46(11):1995-2006
[22] HU J W, LEON R T, PARK T. Mechanical modeling of bolted T-stub connections under cyclic loads Part I:stiffness modeling[J]. Journal of Constructional Steel Research, 2011, 67(11):1710-1718.
[23] GIL B, GONI R. T-stub behaviour under out-of-plane bending. I:experimental research and finite element modeling[J]. Engineering Structures, 2015, 98:230-240.
[24] GIL B, BIJLAARD F, BAYO E. T-stub behavior under out-of-plane bending. Ⅱ:parametric study and analytical characterization[J]. Engineering Structures, 2015, 98:241-250.
[25] YEE Y L, MELCHERS R E. Moment-rotation curves for bolted connections[J]. Journal of Structural Engineering, 1986, 112(3):615-635.
[26] SHERBOURNE A N, BAHAARI M R. Finite element prediction of end plate bolted connection behavior. I:parametric study[J]. Journal of Structural Engineering, 1997, 123(2):157-164.
[27] 丁洁民, 沈祖炎. 节点半刚性对钢框架结构内力和位移的影响[J]. 建筑结构, 1991(6):8-12 DING Jie-min, SHEN Zu-yan. The influence of the semi-rigid connection on the internal force and displacement of the steel frame structure[J]. Building Structure, 1991(6):8-12
[28] 王燕, 李华军, 厉见芬. 半刚性梁柱节点连接的初始刚度和结构内力分析[J]. 工程力学, 2003, 20(6):65-69 WANG Yan, LI Hua-jun, LI Jian-fen. Initial stiffness of semi-rigid beam-to-column connections and tructural internal force analysis[J]. Engineering Mechanics, 2003, 20(6):65-69

[1] 陈伟, 秦仙蓉, 杨志刚. 塔式起重机塔身和起重臂的风载荷特征分析[J]. 浙江大学学报(工学版), 2018, 52(12): 2262-2270.
[2] 王海龙, 祝玉麒, 夏晋, 孙晓燕. 组合连接件对钢管-混凝土黏结性能的影响[J]. 浙江大学学报(工学版), 2018, 52(6): 1107-1113.
[3] 张扬, 沈国辉, 余世策, 马郁葱, 张瑞. 输电线风噪声的声学风洞试验[J]. 浙江大学学报(工学版), 2017, 51(8): 1494-1499.