Please wait a minute...
浙江大学学报(工学版)
浙江大学学报(工学版)  2018, Vol. 52 Issue (10): 1919-1925    DOI: 10.3785/j.issn.1008-973X.2018.10.011
土木工程     
不锈钢筋混凝土柱小偏心受压性能
王海龙1, 凌佳燕1, 孙晓燕1, 李晓滨2
1. 浙江大学 建筑工程学院, 浙江 杭州 310058;
2. 中冶建筑研究总院有限公司, 北京 100088
Performance of stainless steel reinforced concrete column under small eccentric compression
WANG Hai-long1, LING Jia-yan1, SUN Xiao-yan1, LI Xiao-bin2
1. College of Civil Engineering and Architecture, Zhejiang University, Hangzhou 310058, China;
2. Central Research Institute of Building and Construction Limited Company, MCC Group, Beijing 100088, China
 全文: PDF(1168 KB)   HTML
摘要：

为了解决氯盐环境下混凝土结构中钢筋的锈蚀问题，采用新型的不锈钢代替传统碳素钢筋，开展不锈钢筋小偏压柱试验研究，探讨不锈钢筋混凝土柱小偏心受压的破坏过程以及各阶段的变形与裂缝发展规律，分析不锈钢筋的本构模型，开展小偏心受压构件极限承载能力的理论计算.结果表明：不锈钢筋混凝土小偏压柱跨中截面应变分布符合平截面假定，受力过程可以分为弹性、开裂、破坏3个阶段；不锈钢筋混凝土柱小偏心受压破坏模式与碳素钢筋小偏压柱相同，但变形较大，与碳素钢筋偏压柱相比具有更好的延性；不锈钢筋本构模型采用双斜线模型时与试验结果符合较好，且具有一定的安全储备，建议受压设计时予以采用；提升混凝土强度能够提高柱子受压极限承载能力，针对本文的不锈钢筋C70左右的混凝土提升效果较好.
Abstract:

A new stainless steel was adopted as an alternative of traditional carbon steel in order to solve the corrosion issue of steel rebar in concrete structures subjected to chloride environment. Experiments were conducted to analyze the performances of stainless steel reinforced concrete columns under small eccentric compression. The failure mode, the deformation and the crack development of the column were analyzed. The constitutive models of the stainless steel were compared with the test results and were utilized to calculate the ultimate loading capacity of stainless steel reinforced column. Results showed that the strain distribution in the cross section accorded with the plane hypothesis. The deformations of columns can be divided into three stages:elasticity stage, cracking stage and failure stage. The failure mode of stainless steel reinforced component is the same as that of the carbon steel component under eccentric compression, but the deformation of stainless steel reinforced column is much larger than the column reinforced with carbon steel bars, which indicates that the stainless steel reinforced member has a better ductility. The results of using the double slash model for capacity analysis accorded well with the experimental results. The model has a certain safety stock. Increasing the concrete strength will enhance the ultimate load capacity, and the capacity enhancement is obvious when the cube crushing strength of concrete is around 70 MPa.
收稿日期: 2017-09-04 出版日期: 2018-10-11
CLC:  TU375  
基金资助:

国家自然科学基金资助项目（51579220）；国家“863”高技术研究发展计划资助项目（2015AA03A502）；浙江省自然科学基金资助项目（LY16E080004）
通讯作者: 孙晓燕,女,副教授.orcid.org/0000-0003-0708-9565.     E-mail: selina@zju.edu.cn
作者简介: 王海龙(1974-),男,教授,从事混凝土结构及耐蚀结构的研究.orcid.org/0000-0003-0805-7151.E-mail:hlwang@zju.edu.cn
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
作者相关文章　　

引用本文:

王海龙, 凌佳燕, 孙晓燕, 李晓滨. 不锈钢筋混凝土柱小偏心受压性能[J]. 浙江大学学报(工学版), 2018, 52(10): 1919-1925.

WANG Hai-long, LING Jia-yan, SUN Xiao-yan, LI Xiao-bin. Performance of stainless steel reinforced concrete column under small eccentric compression. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2018, 52(10): 1919-1925.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2018.10.011    或    http://www.zjujournals.com/eng/CN/Y2018/V52/I10/1919

[1] GEDGE G. Rationale for using stainless steel reinforcement in the UK construction industry[EB/OL]. 2003-05-12[2017-08-26]. http://www.worldstainless.org/Files/issf/non-image-files/PDF/ss_rebar5.pdf.
[2] 张国学, 吴苗苗. 不锈钢钢筋混凝土的应用及发展[J]. 佛山科学技术学院学报:自然科学版, 2006, 24(2):10-13 ZHANG Guo-xue, WU Miao-miao. Application and development of stainless steel rebars for reinforced concrete structures[J]. Journal of Foshan University:Natural Science Edition, 2006, 24(2):10-13
[3] GEDGE G. Structural uses of stainless steel-buildings and civil engineering[J]. Journal of Constructional Steel Research, 2008, 64(11):1194-1198.
[4] 赵峰. 不锈钢钢筋混凝土梁抗震性能试验研究[D]. 广州:广东工业大学, 2009. ZHAO Feng. Study on the seismic performance of the concrete beam reinforced with stainless steel bar[D]. Guangzhou:Guangdong University of Technology, 2009.
[5] BADDOO N R. Stainless steel in construction:a review of research, applications, challenges and opportunities[J]. Journal of Constructional Steel Research, 2008, 64(11):1199-1206.
[6] BADDOO N, BURGAN B. Structural design of stainless steel[M]. Berkshire:SCI, 2007:6.
[7] 张国学, 徐永生, 丁舟. 不锈钢钢筋混凝土梁受弯性能的试验研究[J]. 铁道建筑, 2008(2):13-15 ZHANG Guo-xue, XU Yong-sheng, DING Zhou. Experimental study on the flexural performance of steel reinforced concrete[J]. Railway Engineering, 2008(2):13-15
[8] 李承昌, 耿会涛, 李清富, 等. 不锈钢筋混凝土梁试验研究[J]. 公路交通科技:应用技术版, 2017, 145(1):15-18 LI Cheng-chang, GENG Hui-tao, LI Qing-fu, et al. Experimental study on concrete beams reinforced with stainless steel bars[J]. Journal of Guizhou University of Finance and Economics, 2017, 145(1):15-18
[9] 李强. 荷载和环境作用下锈蚀钢筋混凝土柱的力学性能[D]. 杭州:浙江大学, 2015. LI Qiang. Mechanical behavior of corroded RC columns under load and environment[D]. Hangzhou:Zhejiang University, 2015.
[10] 方廷. FRP筋-ECC-混凝土复合结构力学性能研究[D]. 杭州:浙江大学, 2015. FANG Ting. Mechanical properties of FRP bar-ECC-concrete composite structures[D]. Hangzhou:Zhejiang University, 2015.
[11] 杜修力, 张海芳, 张建伟. 高强混凝土柱小偏心受压性能尺寸效应试验研究[J]. 土木建筑与环境工程, 2013, 35(4):1-6 DU Xiu-li, ZHANG Hai-fang, ZHANG Jian-wei. Experimental analysis of size effect of high-strength concrete column under small eccentric loading[J]. Journal of Civil, Architectural and Environmental Engineering, 2013, 35(4):1-6
[12] 部门中华人民共和国住房和城乡建设部. 混凝土结构设计规范[M]. 北京:中国建筑工业出版社, 2011.
[13] RASMUSSEN K J R. Full-range stress-strain curves for stainless steel alloys[J]. Journal of Constructional Steel Research, 2003, 59(1):47-61.
[14] 段文峰, 邓泽鹏, 刘文渊, 等. 不锈钢S30408材料本构模型试验研究[J]. 钢结构, 2016, 31(5):37-40 DUAN Wen-feng, DENG Ze-peng, LIU Wen-yuan, et al. Experimental study of the constitutive model of stainless steel S30408[J]. Steel Constuction, 2016, 31(5):37-40
[1] 刘鑫, 陆洲导, 蔡自伟, 李凌志. 梁侧锚钢加固钢筋混凝土梁火灾后受剪性能[J]. 浙江大学学报(工学版), 2018, 52(5): 853-863.
[2] 蔡自伟, 陆洲导, 李凌志, 苏磊, 林闯. 梁侧锚固钢板加固混凝土梁受剪性能试验[J]. 浙江大学学报(工学版), 2018, 52(1): 82-88.
[3] 戴理朝, 王磊, 张建仁, 羊日华. 钢绞线锈蚀产物填充及裂缝宽度预测[J]. 浙江大学学报(工学版), 2018, 52(1): 97-105.
[4] 范圣刚, 张岁寒, 孟畅. 高温冷却后奥氏体不锈钢力学性能试验研究[J]. 浙江大学学报(工学版), 2017, 51(12): 2348-2354.
[5] 张军, 金伟良, 毛江鸿. 基于压磁效应的钢筋疲劳损伤试验研究[J]. 浙江大学学报(工学版), 2017, 51(9): 1681-1687.
[6] 蒋翔, 童根树, 张磊. 耐火钢-混凝土组合梁耐火极限和承载力[J]. 浙江大学学报(工学版), 2017, 51(8): 1482-1493.
[7] 郁杨天, 章青, 顾鑫. 近场动力学与有限单元法的混合模型与隐式求解格式[J]. 浙江大学学报(工学版), 2017, 51(7): 1324-1330.
[8] 金立兵, 金伟良, 王海龙, 夏晋. 多重环境时间相似理论及其应用[J]. J4, 2010, 44(4): 789-797.