| [1] VIJAPUR S H. Design optimization and experimental study of a wet laminar electrostatic precipitator for enhancing collection efficiency of aerosols[D]. Ohio:Ohio University, 2008.
[2] 熊贵龙, 李水清, 陈晟, 等. 增强PM2.5脱除的新型电除尘技术的发展[J]. 中国电机工程学报, 2015, 35(9):2217-2223 XIONG Gui-long, LI Shui-qing, CHEN Sheng, et al. Development of advanced electrostatic precipitation technologies for reducing PM2.5 emissions from coal-fired power plants[J]. Proceedings of the CSEE, 2015, 35(9):2217-2223
[3] CHAKINALA A G, GOGATE P R, BURGESS A E, et al. Treatment of industrial wastewater effluents using hydrodynamic cavitation and the advanced Fenton process[J]. Ultrasonicssonochemistry, 2008, 15(1):49-54.
[4] 赵天怡, 张吉礼. 多孔孔板节流特性主效应因素试验[J]. 哈尔滨工业大学学报, 2007, 39(12):1878-1881 ZHAO Tian-yi, ZHANG Ji-li. Experimental study on main factor affecting throttling characteristic for multi-hole orifice[J]. Journal of Harbin Institute of Technology, 2007, 39(12):1878-1881
[5] 田红, 高旭, 汤珂, 等. 结构参数对多孔板低温流量计性能影响分析[J]. 低温工程, 2015(06):43-48 TIAN Hong, GAO Xu, TANG Ke, et al. Influence of geometric parameters on performance of a cryogenic fluid flow meter with perforated plate[J]. Cryogenics, 2015(06):43-48
[6] CHOI M K, LIM Y B, LEE H W, et al. Flow uniformizing distribution panel design based on a non-uniform porosity distribution[J]. Journal of Wind Engineering and Industrial Aerodynamics, 2014, 130(130):41-47.
[7] GAN G, RIFFAT S B. Pressure loss characteristics of orifice and perforated plates[J]. Experimental Thermal and Fluid Science, 1997, 14(2):160-165.
[8] WEBER L J, CHERIAN M P, ALLEN M E, et al. Headloss characteristics for perforated plates and flat bar screens[R]. Iowa City, IA:Iowa Institute of Hydraulic Engineering, 2000.
[9] GUO B Y, HOU Q F, YU A B, et al. Numerical modelling of the gas flow through perforated plates[J]. Chemical Engineering Research and Design, 2013, 91(3):403-408.
[10] 张颉, 张泽, 胡永锋. 高浓度电除尘器入口封头气固两相流动的近流线数值模拟[J]. 化工学报, 2004, 55(9):1448-1454 ZHANG Jie, ZHANG Ze, HU Yong-feng. Close-to-streamline numerical simulation of gas-solid flow in high concentration ESP gas inlet hood[J]. Journal of Chemical Industry and Engineering, 2004, 55(9):1448-1454
[11] BAYAZIT Y, SPARROW E M, JOSEPH D D. Perforated plates for fluid management:plate geometry effects and flow regimes[J]. International Journal of Thermal Sciences, 2014, 85(85):104-111.
[12] MALAVASI S, MACCHI S, MEREGHETTI E. Cavitation and dissipation efficiency of multihole orifices[Z]. Institute of Thermomechanics Academy of Sciences of the Czech Republic, Prague, 2008:581-586.
[13] MALAVASI S, MESSA G V, MACCHI S. The pressure loss coefficient through sharp-edged perforated plates[Z]. Attidel XXXⅡ Convegno Nazionale di Idraulica e Costruzioni Idrauliche, Dipt. of ⅡAA University of Palermo, 2010:193.
[14] MALAVASI S, MESSA G, FRATINO U, et al. On the pressure losses through perforated plates[J]. Flow measurement and Instrumentation, 2012(28):57-66.
[15] ZHAO T, ZHANG J, MA L. A general structural design methodology for multi-hole orifices and its experimental application[J]. Journal of Mechanical Science and Technology, 2011, 25(9):2237-2246.
[16] 周昊, 赵锴, 郭无双, 等. 中高开孔率电除尘器多孔板的阻力特性试验研究[J]. 中国电机工程学报, 2016, 37(9):2629-2637 ZHOU Hao, ZHAO Kai, GUO Wu-shuang, et al. Research on resistance characteristics of electrostatic precipitator's perforated plates with medium and high porosity[J]. Proceedings of the CSEE, 2016, 37(9):2629-2637
[17] MILLER D S. Internal flow system[M]. Cranfield:BHRA, 1990:366-369. |
