Please wait a minute...
浙江大学学报(工学版)
浙江大学学报(工学版)  2018, Vol. 52 Issue (1): 82-88    DOI: 10.3785/j.issn.1008-973X.2018.01.012
土木工程、交通工程     
梁侧锚固钢板加固混凝土梁受剪性能试验
蔡自伟, 陆洲导, 李凌志, 苏磊, 林闯
同济大学 土木工程学院, 上海 200092
Experimental study on shear performance of bolted side-plated reinforced concrete beams
CAI Zi-wei, LU Zhou-dao, LI Ling-zhi, SU Lei, LIN Chuang
College of Civil Engineering, Tongji University, Shanghai 200092, China
 全文: PDF(2317 KB)   HTML
摘要：

为了研究梁侧锚固钢板加固混凝土梁（BSP梁）的受剪性能，对1根对比梁和4根BSP梁开展四点弯曲受剪试验.考察各试件的破坏模式、初始开裂荷载、裂缝形态、荷载-位移关系、钢筋和钢板应变等受力特性，分析试件受剪承载力、刚度、延性、钢筋和钢板应变与钢板宽度及锚栓间距之间的关系，揭示了BSP梁的受力机制.试验结果表明，采用梁侧锚固钢板法不仅能够有效地提高混凝土梁的受剪承载力，还能够增大刚度，改善延性，限制裂缝开展并使裂缝分布均匀，降低箍筋及纵筋应变，提升梁的受剪甚至受弯性能.
Abstract:

Four-point bending shear test was conducted for a control beam and four BSP beams in order to analyze the shear performance of bolted side-plating (BSP) beams. The failure modes, the cracking loads and patterns, the load-displacement relationships, and the strains of reinforcement and steel plates were analyzed. The variation of the shear capacity, stiffness and ductility, the strains of reinforcement and steel plates as plate breadth and bolt spacing was analysed. Results show that the BSP technique can enhance RC beams in not only shear capacity but also stiffness and ductility. The crack width was restricted and crack distribution was made more uniform. The strains of both stirrups and longitudinal reinforcement were reduced, and the shear even the flexural performance of RC beams was improved.
收稿日期: 2016-10-30 出版日期: 2017-12-15
CLC:  TU375  
基金资助:

国家自然科学基金资助项目（51378397）；国家自然科学基金青年资助项目（51408436）.
通讯作者: 李凌志,男,讲师.orcid.org/0000-0002-9477-6824.     E-mail: lilingzhi@tongji.edu.cn
作者简介: 蔡自伟(1991-),男,硕士生,从事混凝土结构研究.orcid.org/0000-0002-3245-4432.E-mail:caiziwei102@163.com
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
作者相关文章　　

引用本文:

蔡自伟, 陆洲导, 李凌志, 苏磊, 林闯. 梁侧锚固钢板加固混凝土梁受剪性能试验[J]. 浙江大学学报(工学版), 2018, 52(1): 82-88.

CAI Zi-wei, LU Zhou-dao, LI Ling-zhi, SU Lei, LIN Chuang. Experimental study on shear performance of bolted side-plated reinforced concrete beams. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2018, 52(1): 82-88.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2018.01.012    或    http://www.zjujournals.com/eng/CN/Y2018/V52/I1/82

[1] 徐铨彪, 干钢, 陈刚. 外包钢加固钢筋混凝土框架梁受力性能分析[J]. 建筑结构学报, 2016, 37(12):136-143. XU Quan-biao, GAN Gang, CHEN Gang. Analysis on mechanical behavior of RC frame beams encased with steel plate[J]. Journal of Building Structures, 2016, 37(12):136-143.
[2] 林于东, 宗周红, 陈宏磊. 粘钢加固混凝土梁受剪性能试验研究[J]. 建筑结构学报, 2011, 32(8):90-98. LIN Yu-dong, ZONG Zhou-hong, CHEN Hong-lei. Experimental study on shear performance of concrete beams strengthened with steel plates[J]. Journal of Building Structures, 2011, 32(8):90-98.
[3] 徐玉野, 彭小丽, 董毓利, 等. 受火后CFRP布加固钢筋混凝土梁受剪性能试验研究[J]. 建筑结构学报, 2015, 36(2):123-132. XU Yu-ye, PENG Xiao-li, DONG Yu-li, et al. Experimental study on shear behavior of reinforced concrete beams strengthened with CFRP sheet after fire[J]. Journal of Building Structures, 2015, 36(2):123-132.
[4] ROBERTS T M, HAJI-KAZEMI H. Strengthening of under-reinforced concrete beams with mechanically attached steel plates[J]. International Journal of Cement Composites and Lightweight Concrete, 1989, 11(1):21-27.
[5] SOUICI A, BERTHET J F, LI A, et al. Behaviour of both mechanically connected and bonded steel-concrete composite beams[J]. Engineering Structures. 2013, 49(2):11-23.
[6] 李英民, 韩大刚, 林文修. 锚栓钢板加固法抗弯性能试验及设计方法[J]. 工程抗震与加固改造, 2006, 28(5):68-71. LI Ying-min, HAN Da-gang, LIN Wen-xiu. Experiment study of flexural strengthening reinforced concrete beams by bolting steel plates and design method[J]. Earthquake Resistant Engineering and Retrofitting, 2006, 28(5):68-71.
[7] 廖明进. 锚固钢板加固钢筋混凝土梁的弯曲性能研究[D]. 武汉:武汉大学, 2005. LIAO Ming-jin. Research on flexural performance of reinforced concrete beams strengthened by bolting steel plate[D]. Wuhan:Wuhan University, 2005.
[8] 吕淑娟. 钢筋混凝土梁锚粘钢板加固方法研究[D]. 大连:大连海事大学, 2010. LV Shu-juan. The research on methods for strengthening reinforced concrete beams by bolting and affixing steel plates[D]. Dalian:Dalian Maritime University, 2010.
[9] FOLEY C M, BUCKHOUSE E R. Method to increase capacity and stiffness of reinforced concrete beams[J]. Practice Periodical on Structural Design and Construction, 1999, 4(1):36-42.
[10] SU R K L, ZHU Y. Experimental and numerical studies of external steel plate strengthened reinforced concrete coupling beams[J]. Engineering Structures, 2005, 27(10):1537-1550.
[11] LI L Z, LO S H, SU R K L. Experimental study of moderately reinforced concrete beams strengthened with bolted-side steel plates[J]. Advances in Structural Engineering, 2013, 16(3):499-516.
[12] SIU W H. Flexural strengthening of reinforced concrete beams by bolted side plates[D]. Hong Kong:The University of Hong Kong, 2009.
[13] OEHLERS D J, NGUYEN N T, AHMED M, et al. Transverse and longitudinal partial interaction in composite bolted side-plated reinforced-concrete beams[J]. Structural Engineering and Mechanics, 1997, 5(5):553-563.
[14] NGUYEN N T, OEHLERS D J, Bradford M A. An analytical model for reinforced concrete beams with bolted side plates accounting for longitudinal and transverse partial interaction[J]. International Journal of Solids and Structures, 2001, 38(38/39):6985-6996.
[15] BARNES R A, BAGLIN P S, MAYS G C, et al. External steel plate systems for the shear strengthening of reinforced concrete beams[J]. Engineering Structures, 2001, 23(9):1162-1176.
[16] 刘立新, 桑大勇, 王仁义. 锚贴钢板加固钢筋混凝土梁受弯性能的试验研究[J]. 建筑结构,2007(增1):290-293. LIU Li-xin, SANG Da-yong, WANG Ren-yi. Experimental study on flexual properties of RC beams strengthened with steel plate anchored by rivets[J]. Building Structure, 2007, (supple.1):290-293.
[17] 高剑平, 吴章勇, 任乐, 等. 梁侧锚贴钢板加固钢筋混凝土梁抗弯性能试验研究[J]. 工程抗震与加固改造, 2012, 34(2):13-16. GAO Jian-ping, WU Zhang-yong, REN Le, et al. Experimental study on bending behavior of reinforced concrete beam strengthened with bolted side steel plate[J]. Earthquake Resistant Engineering and Retrofitting, 2012, 34(2):13-16.
[18] 桑大勇, 王仁义, 刘立新. 锚贴钢板加固钢筋混凝土梁受剪性能的试验研究[J]. 建筑结构, 2007(增1):294-297. SANG Da-yong, WANG Ren-yi, LIU Li-xin. Experimental study on shear properties of RC beams strengthened with steel plate anchored by rivets[J]. Building Structure, 2007(supple.1):294-297.
[1] 王海龙, 凌佳燕, 孙晓燕, 李晓滨. 不锈钢筋混凝土柱小偏心受压性能[J]. 浙江大学学报(工学版), 2018, 52(10): 1919-1925.
[2] 刘鑫, 陆洲导, 蔡自伟, 李凌志. 梁侧锚钢加固钢筋混凝土梁火灾后受剪性能[J]. 浙江大学学报(工学版), 2018, 52(5): 853-863.
[3] 戴理朝, 王磊, 张建仁, 羊日华. 钢绞线锈蚀产物填充及裂缝宽度预测[J]. 浙江大学学报(工学版), 2018, 52(1): 97-105.
[4] 范圣刚, 张岁寒, 孟畅. 高温冷却后奥氏体不锈钢力学性能试验研究[J]. 浙江大学学报(工学版), 2017, 51(12): 2348-2354.
[5] 张军, 金伟良, 毛江鸿. 基于压磁效应的钢筋疲劳损伤试验研究[J]. 浙江大学学报(工学版), 2017, 51(9): 1681-1687.
[6] 蒋翔, 童根树, 张磊. 耐火钢-混凝土组合梁耐火极限和承载力[J]. 浙江大学学报(工学版), 2017, 51(8): 1482-1493.
[7] 郁杨天, 章青, 顾鑫. 近场动力学与有限单元法的混合模型与隐式求解格式[J]. 浙江大学学报(工学版), 2017, 51(7): 1324-1330.
[8] 金立兵, 金伟良, 王海龙, 夏晋. 多重环境时间相似理论及其应用[J]. J4, 2010, 44(4): 789-797.