Please wait a minute...
浙江大学学报(工学版)
能源工程     
汽轮机高低齿叶顶汽封泄漏流动的数值分析
曹丽华, 贾彦铭, 李盼, 胡鹏飞, 李勇
东北电力大学 能源与动力工程学院,吉林 吉林 132012
Numerical analysis on leakage flow of blade tip stepped seal in steam turbine
CAO Li hua, JIA Yan ming, LI Pan, HU Peng fei, LI Yong
School of Energy and Power Engineering, Northeast Dianli University, Jilin 132012, Jilin Province, China
 全文: PDF(2388 KB)   HTML
摘要:

以带有高低齿叶顶汽封的汽轮机高压第一压力级为研究对象,研究叶顶间隙和汽封齿数对叶顶泄漏量、叶顶间隙内和动叶出口的三维流线以及动叶出口熵增分布的影响,采用数值模拟方法进行三维定常流动计算.结果表明:随着叶顶间隙增加,叶顶泄漏量增加、动叶出口流线偏移加重、熵增的影响区域变大和掺混损失增加.随着叶顶汽封齿数增加,叶顶泄漏量减少、动叶出口流线偏移减轻、熵增变小以及掺混损失降低.叶顶泄漏流引起的掺混损失主要集中于动叶出口顶部7%的区域.

Abstract:

The three-dimensional steady numerical simulation was performed to study the influence of the tip clearances and the teeth number on the blade tip leakage flow rate, the three-dimensional streamlines in the seal and at the exit of rotor blade, and the distribution of entropy production at the exit of rotor blade, by taking the first high-pressure stage of a steam turbine with the blade tip stepped seal as object. Results indicate that the increase of tip clearance cause the increase of the leakage flow rate, the skewing of three-dimensional streamlines at the exit of rotor blade, the region of entropy production and the mixing loss. The increase of teeth number of tip stepped seal cause the decrease of the leakage flow rate, the skewing of three-dimensional streamlines at the exit of rotor blade, the entropy production and the mixing loss. The mixing loss caused by blade tip leakage flow is mainly on the 7% region of the top exit of rotor blade.

出版日期: 2016-08-01
:  TK 263  
基金资助:

国家自然科学基金资助项目(51576036).

作者简介: 曹丽华(1973—),女,教授,从事汽轮机及其辅机的状态监测、经济运行与优化等研究.ORCID: 0000-0003-1155-0262.E-mail:clh320@163.com
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

曹丽华, 贾彦铭, 李盼, 胡鹏飞, 李勇. 汽轮机高低齿叶顶汽封泄漏流动的数值分析[J]. 浙江大学学报(工学版), 10.3785/j.issn.1008-973X.2016.08.017.

CAO Li hua, JIA Yan ming, LI Pan, HU Peng fei, LI Yong. Numerical analysis on leakage flow of blade tip stepped seal in steam turbine. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 10.3785/j.issn.1008-973X.2016.08.017.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2016.08.017        http://www.zjujournals.com/eng/CN/Y2016/V50/I8/1545

[1] MATSUNUMA T.Unsteady flow field of an Axialflow turbine rotor at a low Reynolds number [J].ASME Journal of Turbomachinery,2007,129(2): 360-371.
[2] CECCO D S,YARAS M I,SJOLANDER S A.Measurement of tip leakage flows in turbine cascade with large clearances [C]∥Proceedings of the International Gas Turbine and Aeroengine Congress and Exposition.Houston: ASME,1995: 112.
[3] 邓庆锋,郑群,张海,等.可控涡设计高负荷涡轮二次流旋涡结构及损失分析[J].中国电机工程学报,2012,32(20): 108-114.
DENG Qingfeng,ZHENG Qun,ZHANG Hai,et al.Analysis of secondary flow vortex structure and losses in a high load turbine designed by the controlled vortex method [J].Proceedings of the CSEE,2012,32(20):108-114.
[4] 李平,张荻,何林,等.具有阻尼拉金和叶顶间隙的汽轮机末级复杂三维流动特性[J].中国电机工程学报,2011,31(8):80-86.
LI Ping,ZHANG Di,HE Lin,et al.Study on three dimensional flow of last stage with lashing wire and tip clearance in steam turbine [J].Proceedings of the CSEE,2011,31(8): 80-86.
[5] YOON S,CURTIS E,DENTON J,et al.The effect of clearance on shrouded and unshrouded turbines at two levels of reaction [J].ASME Journal of Turbomachinery,2010,136(2): 1231-1241.
[6] GIER J,STUBERT B.Interaction of shroud leakage flow and main flow in a threestage LP turbine [J].ASME Journal of Turbomachinery,2005,127(4): 649-658.
[7] ROSIC B,DENTON J D,CURTIS E M.The influence of shroud and cavity geometry on turbine performance: an experimental and computational study: Part I: shroud geometry [J].ASME Journal of Turbomachinery,2008,130: 041001110.
[8] PORRECA L,BEHR T,SCHLIENGER J,et al.Fluid dynamics and performance of partially and fully shrouded axial turbines [J].ASME Journal of Turbomachinery,2005,127(4):668-678.
[9] BINDON J P.The Measurement and formation of tip clearance loss [J].ASME Journal of Turbomachinery,1989,111(3):257-263.
[10] 刘艳,刘盼年,姜沃函,等.带围带的涡轮叶栅间隙泄漏流动与气动性能实验[J].航空动力学报,2013,28(10):2291-2301.
LIU Yan,LIU Pannian,JIANG Wohan, et al.Experiment on clearance leakage flow and aerodynamic performence in shrouded turbine cascade [J].Journal of Aerospace Power,2013,28(10):2291-2301.
[11] 周治华,陈绍文,兰云鹤,等.叶顶间隙对某涡轮级流场及气动性能影响的数值研究 [J].中国电机工程学报,2015,35(5):1176-1182.
ZHOU Zhihua,CHEN Shaowen,LAN Yunhe,et al.numerical investigation on the effect of tip clearance on a turbine stage flowfield and aerodynamic performance [J].Proceedings of the CSEE,2015,35(5):1176-1182.
[12] RAO N M,CAMCI C.Axial turbine tip desensitization by injection from a tip trench part 1: effect of injection mass flow rate [C]∥Proceedings of ASME Turbo Expo 2004: Power for Land,Sea,and Air.Vienna: ASME,2004: 1075-1088.
[13] RAO N M,CAMCI C.Axial turbine tip desensitization by injection from a tip trench part 2: leakage flow sensitivity to injection location[C]∥Proceedings of ASME Turbo Expo 2004: Power for Land,Sea,and Air. Vienna: ASME,2004: 1740(10): 109-118.
[14] 祁明旭,丰镇平.透平动叶顶部间隙流的表现形式及其对透平性能的影响[J].西安交通大学学报,2005,39(3):244-246.
QI Mingxu,FENG Zhenping.Representation of tip clearance flow and influence on turbine performance[J].Journal of Xi’an Jiaotong University,2005,39(3):244-246.
[15] 许开富,乔渭阳,罗华玲.涡轮叶尖间隙流动的数值模拟[J].热能动力工程,2009,24(4): 432-436.
XU Kaifu,QIAO Weiyang,LUO Hualing.numerical simulation of turbine blade tip leakage flows [J].Journal of Engineering for Thermal Energy and Power,2009,24(4): 432-436.
[16] 沈士一,庄贺庆,康松,等.汽轮机原理[M].北京:水利电力出版社,1992: 51-54.
No related articles found!