Please wait a minute...
浙江大学学报(工学版)
电气工程     
模块化多电平换流器改进最近电平调制策略
周洋1, 胡鹏飞1, 江道灼1, 张科波2
1. 浙江大学 电气工程学院,浙江 杭州 310027; 2. 国网浙江宁波市鄞州区供电公司,浙江 宁波 315100
Improved nearest level modulation strategy for modular multilevel converters
Zhou Yang1, HU Peng-fei1, JIANG Dao-zhuo1, ZHANG Ke-bo2
1. College of Electrical Engineering, Zhejiang University, Hangzhou 310027, China;2. State Grid Ningbo Yinzhou Power Supply Company, Ningbo 315100, China
 全文: PDF(1397 KB)   HTML
摘要:

针对传统最近电平调制策略(NLM)在模块化多电平换流器(MMC)中造成的直流侧电压波动和二倍频环流等问题,提出改进最近电平的调制策略.充分考虑子模块电容电压的波动,采用优化的电容电压均衡策略.由于每个桥臂中各子模块的电压近似相等,用子模块平均电压代替每个子模块电压,通过分析系统的二倍频环流产生机理,建立数学模型,根据数学模型提出改进最近电平调制策略的控制策略.针对子模块电压波动带来的影响,改进的策略采取反馈实际电容电压,消除了实际桥臂电压与参考电压间的误差,抑制了直流侧电压波动和二倍频环流.通过PSCAD/EMTDC软件对系统进行仿真,结果表明,在系统稳态和动态运行情况下,提出的改进策略均能够有效抑制直流电压波动和二倍频环流,系统输出电流的毛刺显著减小,具有较高的稳定性.

Abstract:

In order to solve the fluctuations of DC voltages and circulating currents of modular multilevel converters by using traditional nearest level modulation (NLM), an improved NLM method for the modular multilevel converter was proposed. In the proposed method, full consideration to capacitance voltage of the sub-module was given and capacitance voltage balancing strategy of optimization was used. Instead of each module voltage, the module average voltage was used because the voltage of each module is approximately equal. Through the analysis of the circulating current’s generation mechanism, mathematical model was established. According to the mathematical model, in view of the impact of the sub-modules’ voltage fluctuations, the control strategy of NLM has been proposed, which is, feeding back actual capacitance voltage to curb circulating current. In this way, the improved NLM both eliminates the errors between actual arm voltage and reference voltage and inhibits the fluctuations of DC voltages and circulating currents. By the simulation in PSCAD/EMTDC, the results show that the improved NLM can suppress the fluctuation of DC voltage and circulating currents both in steady and dynamic state, which means that the system has a high reliability.

出版日期: 2015-08-01
:  TM 76  
通讯作者: 江道灼,男,教授,博导.     E-mail: dzjiang@zju.edu.cn
作者简介: 周洋(1991—),男,硕士,从事高压直流输电研究.E-mail: zjueezy@zju.edu.cn
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

周洋, 胡鹏飞, 江道灼, 张科波. 模块化多电平换流器改进最近电平调制策略[J]. 浙江大学学报(工学版), 10.3785/j.issn.1008-973X.2015.08.017.

ZHOU Yang, HU Peng-fei, JIANG Dao-zhuo, ZHANG Ke-bo. Improved nearest level modulation strategy for modular multilevel converters. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 10.3785/j.issn.1008-973X.2015.08.017.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2015.08.017        http://www.zjujournals.com/eng/CN/Y2015/V49/I8/1522

[1] LESNICAR A, MARQUARDT R. An innovative modular multilevel converter topology suitable for a wide power range [C]∥Power Tech Conference Proceedings.Bologna, Italy: IEEE, 2003.
[2] GLINKA M. Prototype of multiphase modular multilevel converter with 2 MW power rating and 17-level-output-voltage [C]∥Power Electronics Specialists Conference.Aachen, Germany: PESC 04. 2004 IEEE 35th Annual, 2004, (4): 2572-2576.
[3] ILVES K, ANTONOPOULOS A, NORRGA S, et al. Steady state analysis of interaction between harmonic components of arm and line quantities of modular multilevel converters [J]. IEEE Transactions on Power Electronics, 2012, 27(1): 57-68.
[4]  HARNEFORS L, ANTONOPOULOS A, NORRGA S, et al. Dynamic analysis of modular multilevel converters  [J]. IEEE Transactions on Industrial Electronics,2012, 60(7): 2526-2537.
[5]  郭捷,江道灼,周月宾,等.交直流侧电流分别可控的模块化多电平换流器控制方法[J].电力系统自动化. 2011, 35(7): 42-47.
GUO Jie, JIANG Dao-zhuo, ZHOU Yue-bin, et al. AC and DC Current hybrid control strategy for modular multilevel converter [J]. Automation of Electric Power Systems,2011, 35(7): 42-47.
[6] 管敏渊,徐政,屠卿瑞,等.模块化多电平换流器型直流输电的调制策略[J].电力系统自动化.2010, 34(2): 48-52.
GUAN Min-yuan, XU Zheng, TU Qing-rui, et al. Nearest level modulation for modular multilevel converters in HVDC transmission [J]. Automation of Electric Power Systems, 2010, 34(2): 48-52.
[7] 胡鹏飞,江道灼,郭捷,等.基于晶闸管换向的混合型多电平换流器[J].电力系统自动化,2012, 36(21): 102-107.
HU Peng-fei, JIANG Dao-zhuo, GUO Jie, et al. Hybrid multilevel converters based on thyristor alternate-arms [J]. Automation of Electric Power Systems, 2012, 36(21): 102-107.
[8] HAGIWARA M, AKAGI H. Control and experiment of pulse width modulated modular multilevel converters [J]. IEEE Transactions on Power Electronics, 2009, 24(7): 1737-1746.
[9] ILVES K, ANTONOPOULOS A, HARNEFORS L, et al. Capacitor voltage ripple shaping in modular multilevel converters allowing for operating region extension[C]∥ 37th Annual Conference on IEEE Industrial Electronics Society. Melbourne, VIC: IEEE, 2011: 4403-4408.
[10] HU Peng-fei, JIANG Dao-zhuo, ZHOU Yue-bin, et al. Study of the proportional resonant control based modular multilevel converter [C]∥ 3rd International Conference on Digital Manufacturing and Automation. GuiLin: IEEE, 2012: 810-813.
[11] 屠卿瑞,徐政,管敏渊,等.模块化多电平换流器环流抑制控制器设计[J].电力系统自动化,2010,34(18): 57-61.
TU Qing-rui,XU Zheng,GUAN Min-yuan,et al.Design of circulating current suppressing controllers for modular multilever converter [J].Automation of Electric Power Systems,2010,34(18): 57-61.
[12] ANGQUIST L, ANTONOPOULOS A, SIEMASZKO D, et al. Open-Loop control of modular multilevel converters using estimation of stored energy [J]. IEEE Transactions on Industry Applications, 2011, 47(6): 2516-2524.
[13] 王姗姗,周孝信,汤广福,等.模块化多电平换流器HVDC直流双极短路子模块过电流分析[J].中国电机工程学报. 2011, 31(1): 1-7.
WANG Shan-shan, ZHOU Xiao-xin, TANG Guang-fu, et al. Analysis of submodule overcurrent caused by DC pole-to-pole fault in modular multilevel converter HVDC System [J]. Proceedings of the CSEE. 2011, 31(1): 1-7.
[14] MINYUAN G, ZHENG X. Modeling and control of a modular multilevel converter-based HVDC system under unbalanced grid conditions [J]. IEEE Transactions on Power Electronics, 2012, 27(12): 4858-4867.
[15] 李强,贺之渊,汤广福,等.新型模块化多电平换流器空间矢量脉宽调制方法[J].电力系统自动化.2010, 34(22): 75-79.
LI Qiang, HE Zhi-yuan, TANG Guang-fu, et al. A Space-vector PWM method for a new type of modular multilevel converter [J ]. Automation of Electric Power Systems, 2010, 34(22): 75-79.
[16] TU Qing-rui, XU Zheng, XU Lie. Reduced switching frequency modulation and circulating current suppression for modular multilevel converters [J]. IEEE Transactions on Power Delivery, 2011, 26(3): 2009-2017.
[17] 周月宾,江道灼,胡鹏飞,等.利用均压策略消除MMC死区影响的方法[J].浙江大学学报:工学版, 2014, 48(4): 561-567.
ZHOU Yue-bin, JIANG Dao-zhuo, HU Peng-fei, et al. Method through voltage balancing strategy for eliminating dead time effect of MMC [J]. Journal of Zhejiang University :Engineering Science, 2014, 48(4): 561-567.
[18] ZHOU Yue-bin, JIANG Dao-zhuo, GUO Jie, et al. Analysis and control of modular multilevel converters under unbalanced conditions [J]. IEEE Transactions on Power Delivery, 2013, 28(4):1986-1995.

[1] 谢鹏康, 陈恒林, 陈国柱. 并联磁阀三相六柱式磁阀式可控电抗器磁损特性[J]. 浙江大学学报(工学版), 2015, 49(12): 2418-2424.
[2] 陈晓, 陈恒林, 陈国柱. 基于耦合电感的三相四线制并联有源电力滤波器[J]. 浙江大学学报(工学版), 2015, 49(8): 1529-1536.
[3] 杨昆, 王跃, 陈国柱. 基于误差调节的DSTATCOM重复控制策略[J]. 浙江大学学报(工学版), 2015, 49(6): 1087-1092.
[4] 王跃,杨昆,杨华,陈国柱. 通用SPWM发生器的实现及脉冲竞争消除新方法[J]. 浙江大学学报(工学版), 2014, 48(11): 2087-2093.
[5] 王志恒,杨庆华,胡新华,阮健. 颤振激励下金属冷挤压成形降载特性[J]. 浙江大学学报(工学版), 2014, 48(11): 1983-1993.
[6] 王跃,杨昆,杨华,陈国柱. 通用SPWM发生器的实现及脉冲竞争消除新方法[J]. 浙江大学学报(工学版), 2014, 48(6): 2-.
[7] 王志恒,杨庆华,胡新华,阮健. 颤振激励下金属冷挤压成形降载特性[J]. 浙江大学学报(工学版), 2014, 48(6): 3-.
[8] 钟晓剑, 冯霞,徐群伟,陈国柱. 基于ABC坐标系的三相四线并联型APF控制策略[J]. 浙江大学学报(工学版), 2014, 48(5): 889-895.
[9] 吕文韬,沈忱,江道灼,桂帆,范宇,吴兆麟. 具有电容限压功能的限流式统一潮流控制器[J]. 浙江大学学报(工学版), 2014, 48(5): 877-881.
[10] 周月宾, 江道灼, 胡鹏飞, 梁一桥, 郭捷, 林志勇. 利用均压策略消除MMC死区影响的方法[J]. 浙江大学学报(工学版), 2014, 48(4): 561-567.
[11] 林克曼, TOMSOVIC Kevin, 万秋兰. 基于磁放大器的新型可调电抗器的应用[J]. J4, 2014, 48(4): 589-593.
[12] 王跃, 杨昆, 钟晓剑, 陈国柱. 基于多同步旋转变换的并联型APF补偿策略[J]. J4, 2013, 47(4): 705-710.
[13] 杨昆, 陈磊, 陈国柱. 单相SVG高性能补偿电流控制技术[J]. 浙江大学学报(工学版), 2013, 47(2): 339-344.
[14] 白杨, 杨家强, 曾争. 谐波检测算法中高性能数字低通滤波器的设计[J]. J4, 2013, 47(1): 169-173.
[15] 阎博,江道灼,甘德强,藏玉清. 基于反馈线性化H∞方法的UPFC非线性鲁棒控制器[J]. J4, 2012, 46(11): 1975-1980.