Safety assessment on big flexible pipe installation under sea
#br#  
" /> 大口径复合材料管水下铺设的安全性评估
Please wait a minute...
浙江大学学报(工学版)
土木工程     
大口径复合材料管水下铺设的安全性评估
曹宇1, 刘紫嫣2
1. 浙江大学 建筑工程学院,浙江 杭州 310058; 2. 上海船舶设计院,上海 200123
Safety assessment on big flexible pipe installation under sea
#br#  
CAO Yu1, LIU Zi-yan2
1. College of Civil Engineering and Architecture, Zhejiang University, Hangzhou 310058, China; 2. Ship Design and Research Institute, Shanghai 200123, China
 全文: PDF(2612 KB)   HTML
摘要:

以用于水下铺设的纤维缠绕增强复合管(RTP)为主要研究对象,考虑风浪流环境力作用及铺管平台运动等动态环境的影响,以及管道自身轴向拉力和弯曲的作用,采用悬链线理论方法及数值软件模拟计算方法,提出一套对大口径RTP的水下铺设设计的安全评估方法.对铺设的关键参数——材料属性、铺设角度、管线形态、端部张力、浮块重量、铺设深度等进行分析,研究RTP与浮式平台在环境力作用下运动及受力的非线性问题,以及大口径RTP轴向拉伸和弯曲剪切失效模式.结果表明:所提出的安全评估方法能够有效、真实地评估水下铺设过程中RTP的安全性能,能够为RTP安全评估提供符合工程实际的参考建议.

Abstract:

With the fiber-reinforced thermoplastic flexible pipe (RTP) used in underwater pipe-lay as the object of the research, considering the effects of wind, wave and current load and the motion of pipe-lay platforms as well as the axial tension and bending shear of RTP, a safety assessment method on the underwater pipe-lay design of the big RTP installation was given by using the catenary theory and hydrodynamic calculation method. The critical parameters of the RTP including material property, laid angle, pipeline shape, top tension, buoyant weight and laid depth were analyzed, the nonlinear problems of RTP and pipe-lay platform under the dynamic action of environmental loads were studied, and the failure modes of axial tension and bending shear of the big RTP were mastered. The results show that the theoretical guidance and failure analysis method can be used to assess the safety of RTP during the installation procedure under sea effectively and truly. Finally some reference advises of engineering practice for safety assessment were proposed.

出版日期: 2015-06-01
:  TE 973  
基金资助:

国家杰出青年科学基金资助项目(51325901)

作者简介: 曹宇(1982-), 男, 博士后, 从事深水海底管道方面的研究. E-mail: tonycao@zju.edu.cn
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

曹宇, 刘紫嫣. 大口径复合材料管水下铺设的安全性评估[J]. 浙江大学学报(工学版), 10.3785/j.issn.1008-973X.2015.06.015.

CAO Yu, LIU Zi-yan.

Safety assessment on big flexible pipe installation under sea
#br#  
. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 10.3785/j.issn.1008-973X.2015.06.015.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2015.06.015        http://www.zjujournals.com/eng/CN/Y2015/V49/I6/1108

[1] 孙哲,孙振国,刘惠明,等.柔性增强热塑性塑料管道的发展和市场前景[J].新型建筑材料,2013(12): 97101.SUN Zhe, SUN Zhen-guo, LIU Hui-ming, et al. Development and market prospect of the flexible reinforced thermoplastic pipe[J]. New Building Materials, 2013(12): 97-101.

[2] CHOI H S. Deepwater pipelay analysis[J]. Journal of Offshore Technology, 1999,7(2): 18-20.

[3] 龚顺风,徐普,钟文军,等.深水S型铺管收弃管作业分析[J].浙江大学学报:工学版,2013,47(11): 1904-1910.

GONG Shun-feng, XU Pu, ZHONG Wen-jun, et al. Analysis on abandonment and recovery of offshore pipeline for deepwater S-lay operation [J]. Journal of Zhejiang University: Engineering Science, 2013, 47(11): 19041-910.
[4] WANG L Z, YUAN F, GUO Z, et al. Numerical analysis of pipeline in J-lay problem [J]. Journal of Zhejiang University-Science A. 2010, 11(11): 908-920.
[5] WANG L Z, YUAN F, GUO Z. Numerical analysis for pipeline installation by S-lay method[C]∥ OMAE. Shanghei: ASME International, 2010.
[6] WANG L Z, YUAN F, GUO Z, et al. Analytical prediction of pipeline behaviors in J-lay on plastic seabed[J]. Journal of Waterway, Port, Coastal, and Ocean Engineering, 2011, 138(2): 77-85.
[7] BAI Q, BAI Y. Subsea Pipeline Handbook[M]: New York, USA: Elsevier, 2013.
[8] BAI Y, WANG Y, CHENG P. Analysis of reinforced thermoplastic pipe (RTP) under axial loads [C]∥ International Conference on Pipelines and Trenchless Technology. Wuhan, China: ICPTT International, 2012.
[9] DNV. DNV-CN30-5 Environmental conditions and environmental loads[S]. Norway: DET NORSKE VERITAS, 2000.
[10] DNV. DNV-RP-F109 On-bottom stability design of submarine pipelines[S]. Norway: DET NORSKE VERITAS, 2007.
[11] 龚顺风,陈源,金伟良,等.高静水压力作用下深海油气管道的局部屈曲[J]. 浙江大学学报:工学版,2012, 46(1): 14-19.
GONG Shun-feng, CHEN Yuan, JIN Wei-liang, et al. Local buckling of deepwater oil-gas pipeline under high hydrostatic pressure [J]. Journal of Zhejiang University: Engineering Science, 2012, 46(1): 14-19.
[12] ASTM. D2105-2001 Standard test method for longitudinal tensile properties of "fiberglass" pipe and tube[S]. USA: ASTM International, 2001.
[13] ARJOMANDI K, TAHERI F. Bending capacity of sandwich pipes [J]. Ocean Engineering, 2012,48: 17-31.
[14] 崔磊,何勇,金伟良.不同海域Semi平台关键节点的疲劳可靠性分析[J].浙江大学学报:工学版,2013, 47(8): 1329-1337.
CUI Lei, HE Yong, JIN Wei-liang. Fatigue reliability analysis on key nodes of a deepwater semi-submersible platform in different sea areas [J]. Journal of Zhejiang University: Engineering Science, 2013, 47(8): 1329-1337.
[1] 雷明玮, 龚顺风, 胡勍. 纯弯作用下深海夹层管复合结构屈曲失稳分析[J]. 浙江大学学报(工学版), 2015, 49(12): 2376-2386.
[2] 洪非, 武文华, 杜宇, 毕祥军. 深水铺管垂弯段屈曲状态的原型监测方法[J]. 浙江大学学报(工学版), 2015, 49(10): 2018-2024.
[3] 曹宇, 刘紫嫣. 大口径复合材料管水下铺设的安全性评估[J]. 浙江大学学报(工学版), 2015, 49(2): 3-4.
[4] 龚顺风,胡勍. 外压作用深海夹层管复合结构屈曲失稳分析[J]. 浙江大学学报(工学版), 2014, 48(9): 1624-1631.
[5] 龚顺风,徐普,钟文军,何宁,燕晖. 深水S型铺管收弃管作业分析[J]. J4, 2013, 47(11): 1904-1910.
[6] 龚顺风,陈源,金伟良,白勇,李志刚,赵冬岩. 高静水压力作用下深海油气管道的局部屈曲[J]. J4, 2012, 46(1): 14-19.
[7] 邵煜, 虞介泽, 俞亭超. 埋地管线均匀腐蚀失效力学模型及随机分析[J]. J4, 2010, 44(6): 1225-1230.