Please wait a minute...
浙江大学学报(工学版)
机械工程     
五轴数控机床旋转轴几何误差辨识新方法
付国强,傅建中,沈洪垚
浙江大学 流体动力与机电系统国家重点实验室,浙江 杭州 310027
One novel geometric error identification of rotary axes for five-axis machine tool
FU Guo-qiang, FU Jian-zhong, SHEN Hong-yao
The State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou 310027, China
 全文: PDF(2526 KB)   HTML
摘要:

为了系统、快速方便地测量五轴数控机床2个旋转轴所有的几何误差项,提出一种基于球杆仪测量的六圈法几何误差辨识方法.基于五轴数控机床几何误差模型分析旋转轴几何误差项对机床综合几何误差的影响,与平动轴9线法辨识原理比较,并结合球杆仪测量的特点,建立六圈法辨识方法.该方法根据旋转轴各个几何误差项的性质可辨识得到每个旋转轴包括垂直度误差和安装误差的全部10项几何误差.为了提高六圈法辨识精度,分析球杆仪安装误差对测量数据的影响,并用最小二乘法得到球杆仪安装误差,从测量数据中剔除安装误差的影响,仿真结果验证了消除安装误差方法的正确性.采用六圈法测量辨识机床旋转轴误差,并比较补偿旋转轴误差前后的测量数据,补偿后误差降低了50%到80%,实验结果表明,六圈法辨识精度高,系统性好,可以测量不同的旋转轴.

Abstract:

In order to obtain all the geometric errors of rotary axes for a five-axis machine tool systematically and easily, a geometric error identification approach with ballbar measurement, six-circle technology, is developed. The influences of geometric errors of rotary axes on the integrated errors of five-axis CNC machine tools were obtained based on the geometric error model. By comparing with the nine-line method of linear axes, six-circle technology was established due to the characteristic of ballbar. This approach identified all the ten errors of each axis, including squareness errors and offset errors through analyzing the property of geometric errors. The impact of the set-up errors of ballbar was analyzed to improve the accuracy of six-circle technology. The set-up errors were obtained using the least square method, and they were removed from the measured data of ballbar.  He simulation validated that elimination of set-up errors is appropriate enough. Six-circle technology was used to identify the geometric errors of rotary axes for five-axis machine tools. The measured data with compensation of geometric errors of rotary axis were compared with those without compensation. The measured errors with compensation decreased about from 50% to 80%. The experiments show that six-circle technology is precise in a systematic way and can identify different types of rotary axes.

出版日期: 2015-12-26
:  TH 161  
基金资助:

 国家自然科学基金资助项目(51175461);高等学校博士学科点专项科研基金资助项目(20120101110055)浙江省自然科学基金项目(Y14E050069)

通讯作者: 傅建中,男,教授,博导     E-mail: fjz@zju.edu.cn
作者简介: 付国强(1988-),男,博士生,从事精密仪器、先进数控技术研究工作.E-mail:fuguoqiang_1988@126.com
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

付国强,傅建中,沈洪垚. 五轴数控机床旋转轴几何误差辨识新方法[J]. 浙江大学学报(工学版), 10.3785/j.issn.1008-973X.2015.05.006.

FU Guo-qiang, FU Jian-zhong, SHEN Hong-yao. One novel geometric error identification of rotary axes for five-axis machine tool. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 10.3785/j.issn.1008-973X.2015.05.006.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2015.05.006        http://www.zjujournals.com/eng/CN/Y2015/V49/I5/848

[1] SHEN H, FU J, HE Y, et al. On-line asynchronous compensation methods for static/quasi-static error implemented on CNC machine tools [J]. International Journal of Machine Tools and Manufacture, 2012. 60(0): 14-26.
[2] 王金栋, 郭俊杰, 费致根, 等. 基于激光跟踪仪的数控机床几何误差辨识方法[J]. 机械工程学报, 2011(14):13-19.
WANG Jin-dong, GUO Jun-jie, FEI Zhi-gen, et al. Method of geometric error identification for numerical control machine tool based on laser tracker [J]. Chinese Journal of Mechanical Engineering, 2011. 47(14): 13-19.
[3] ZHU S, DING G, QIN S, et al. Integrated geometric error modeling, identification and compensation of CNC machine tools [J]. International Journal of Machine Tools and Manufacture, 2012. 52(1): 24-29.
[4] FU G, FU J, XU Y, et al. Product of exponential model for geometric error integration of multi-axis machine tools [J]. The International Journal of Advanced Manufacturing Technology, 2014. 71(9/12): 1653-1667.
[5] LEI W T, HSU Y Y. Error measurement of five-axis CNC machines with 3D probe–ball [J]. Journal of Materials Processing Technology, 2003. 139(1/3): 127-133.
[6] WEIKERT S. R-Test, A new device for accuracy measurements on five axis machine tools [J]. CIRP Annals - Manufacturing Technology, 2004. 53(1): 429-432.
[7] ZARGARBASHI S H H, MAYER J R R, Assessment of machine tool trunnion axis motion error, using magnetic double ball bar [J]. International Journal of Machine Tools and Manufacture, 2006. 46(14): 1823-1834.
[8] TSUTSUMI M, SAITO A. Identification and compensation of systematic deviations particular to 5-axis machining centers [J]. International Journal of Machine Tools and Manufacture, 2003. 43(8): 771-780.
[9] TSUTSUMI M, SAITO A. Identification of angular and positional deviations inherent to 5-axis machining centers with a tilting-rotary table by simultaneous four-axis control movements [J]. International Journal of Machine Tools and Manufacture, 2004. 44(12/13): 1333-1342.
[10] TSUTSUMI M, TONE S, KATO N, et al. Enhancement of geometric accuracy of five-axis machining centers based on identification and compensation of geometric deviations [J]. International Journal of Machine Tools & Manufacture, 2013,68: 1120.
[11] LEE K I, LEE D M, YANG S H. Parametric modeling and estimation of geometric errors for a rotary axis using double ball-bar [J]. International Journal of Advanced Manufacturing Technology, 2012. 62(5/8): 741-750.
[12] LEE K I, YANG S H. Robust measurement method and uncertainty analysis for position-independent geometric errors of a rotary axis using a double ball-bar [J]. International Journal of Precision Engineering and Manufacturing, 2013. 14(2): 231-239.
[13] LEE K I, YANG S H. Measurement and verification of position-independent geometric errors of a five-axis machine tool using a double ball-bar [J]. International Journal of Machine Tools and Manufacture, 2013. 70(0): 45-52.
[14] 胡建忠, 王波雷, 王民,等. 基于双频激光干涉仪的DM1007数控铣床几何误差辨识的实验研究[J]. 制造技术与机床, 2010(04): 103-106.
HU Jian-zhong, WANG Bo-lei, WANG Min, et al. The study of geometric error identification of DM1007 milling machine based on laser interferometer [J]. Manufacturing Technology & Machine Tool, 2010(4): 103-106.
[15] HE Z Y, FU J Z, YAO X H. Volumetric error modeling and Analysis for CNC machine tool based on multi-body system [J]. Key Engineering Materials, 2010. 426-427: 441-446.
[16] LIN Y, SHEN Y. Modelling of five-axis machine tool metrology models using the matrix summation approach [J]. The International Journal of Advanced Manufacturing Technology, 2003. 21(4): 243-248.

[1] 冯刚,付国强,孙磊,傅建中. 多轴数控机床转台几何误差辨识新方法[J]. 浙江大学学报(工学版), 2015, 49(11): 2083-2091.
[2] 赖金涛, 傅建中, 沈洪垚, 甘文峰. 基于NURBS曲面敏感点的曲面检测测点优化[J]. 浙江大学学报(工学版), 2015, 49(7): 1201-1207.
[3] 何振亚,傅建中,徐月同. 数控机床旋转轴转角定位误差测量方法[J]. 浙江大学学报(工学版), 2015, 49(5): 835-840.
[4] 王益, 赖金涛, 傅建中, 沈洪垚. 基于NURBS控制点重构的加工误差在机测量方法[J]. 浙江大学学报(工学版), 2014, 48(10): 1781-1787.
[5] 邓小雷,傅建中,沈洪垚,陈子辰. 精密数控机床多主轴系统热平衡试验[J]. 浙江大学学报(工学版), 2014, 48(9): 1646-1653.
[6] 金育安, 贺永, 傅建中. NURBS及Hermite混合高速加工插补算法[J]. J4, 2014, 48(4): 641-648.
[7] 计时鸣, 曾晰, 金明生, 谭大鹏. 基于修正Preston方程的气压砂轮加工特性[J]. J4, 2013, 47(7): 1299-1306.
[8] 李晟,姚鑫骅,傅建中. 基于通信质量约束的主轴热监测无线传感器布点优化[J]. J4, 2013, 47(7): 1281-1286.
[9] 郭志敏,蒋君侠,柯映林. 基于定位器的飞机大部件调姿系统静刚度[J]. J4, 2010, 44(11): 2077-2082.
[10] 郭志敏, 蒋君侠, 柯映林. 一种精密三坐标POGO柱设计与精度研究[J]. J4, 2009, 43(09): 1649-1654.